Shanghai Wanbo Hoisting Machinery Co. Ltd

Shanghai, China, China

We are offering chain hoist etc. We are offering 2t chain hoist - hook fixed type. technical parameters type wbh-02002s capacity(t) 2 standard lifting height(m) 3 lifting speed(m) 3.3lifting motor power(kw) 1.5 rotation speed(r/min) 1440 phases 3 voltage(v) 200-440 frequency(hz) 50 operating motor power(kw) 0.4 rotation speed(r/min) 1440 operating speed(m/min) 11/21 phases 3 voltage(v) 200-440 frequency(hz) 50 chain turns 2 chain specification ?7.1 test load(t) 2.5 weight(kg) 73 i-beam(mm) 82-178 weight added with 1m higher(kg) 2.2

We are offering 5t chain hoist - hook fixed type. shell: light aluminum alloy shell shall be adopted, which is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design. inverse phase sequence protecting device:it is the special electrical installation which controls the circuit not to work in case of wiring error in the power supply. limit switch:the limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety. 24v/36v device:it is used to prohibit the emergencies from occuring in case of the leakage in the switch. side magnetic braking device:this device shall realize the instant brake in case of the power dump. chain bag:it shall be light , handsome and durable. chain:the chain shall adopt the imported fec80 ultra heat-treatable aluminum alloy chain. type wbh-05002s capacity(t) 5 standard lifting height(m) 3 lifting speed(m/min) 2.7 lifting motor power(kw) 3.0 rotation speed(r/min) 1440 phases 3 voltage(v) 200-440 frequency(hz) 50 chain turns 2 chain specification o11.2 test load(t) 6.25 weight(kg) 151 weight added with 1m higher(kg) 5.

We are offering lever hoist. 1. According to the standards, the main component and the performance of the hoist passed the strict inspection and test to make it more reliable and safer. 2. The application of low alloy steel structure makes it safer and reliable and durable. 3. The application of 800Mpa high strength lifting chain and the design of forging hook ensures slow lifting speed and to avoid overload. Compliance with European CE safety standards, the hoist has high safety efficiency and long service life. 4. By the use of integral bearing, greatly improving the performance, service life and maintainability. 5. Rotation stability, high efficiency, labor-saving. 6. It's more safer for the use of double pawls and stamping guide chain plate7. Small size, light weight, nice appearance and easy to carry8. Compact structure, smooth operation and nice appearance. 9. The patent technology of unique overload device (one - way clutch) for selection. 10. The shell is made of high quality alloy steel which is sturdy and durable and safe enough. Type WBSB-015Capacity 1.5t Stadard lift 1.5m Running test load 22.5 Effort required to lift rated load 240 Strands of load chain 1 Load chain diameter 8mm Net weight 11.8kgPacking measurement 46.515.519cm Exira weight per meter of extra lift 1.4kg.