Fire Fighting & Protection

We offer the best product range of under Ground Fire Hydrant and Pillar Hydrant.

Under Ground Fire Hydrant

Under Ground Fire HydrantStandard: BS750Material: Ductile iron GGG5040 or cast iron, Bonnet: Cast iron Ductile ironCoating: Internal and external with fusion bonded epoxy coating. or liquid paintingStem: stainless steelStem nut: brassNotes:Outdoor fire hydrant is the main equipment of urban net will supply water to the fire, installed in the outdoor fire service pipe net, for fire engines or fire pump getting water to fire fighting and rescue work, such as pipeline of high pressure water area can be directly connected to fire hose to fire extinguishing.Outdoor fire hydrant have two kinds: ground and underground.Ground type:body and interface above the ground, target significantly, easy to use, suitable for high temperature place.Underground type:install on the underground, do not take a place, not easy to damage, suitable for a cold place.

View Complete Details

Ask Latest Price & Details

Pillar Hydrant

Pillar hydrantsize: dn 100, dn 150body material: cast iron bs 1452, adaptor material: brass or bronzecoating: internal and external with fusion bonded epoxy coating. Or liquid paintingcolor: blue color, black color, red color, gray color, etc epoxy coated.Working pressure: 25bar (350psi)notes:used as auxiliary connection through which the fire department can pump water to supplement existing water supplies. Pillar hydrant widespread and convenient in life for fire fighting. This is safety for children, because it is fixed.Must check the fire hydrant every month or before major holiday.Removing clutter around the stem end, will special wrench in rod head, check whether appropriate, turn the valve stem, filling lubricating oil. Using oil sands erasing rust stains on outlet thread, check the rubber gasket in cap are in good condition.Open the fire hydrant, check the situation of water supply, put all rusty water and then shut, and observe any slack phenomenon.Exterior paint falls off should be timely repair.Check and remove the obstacles near fire hydrant.

View Complete Details

Ask Latest Price & Details

Under Ground Fire Hydrant

Min. Order (MOQ) 500 Kilogram

View Complete Details

Ask Latest Price & Details

Pillar Hydrant

Min. Order (MOQ) 500 Kilogram

Pillar HydrantSize: DN 100, DN 150Body Material: cast iron BS 1452, Adaptor Material: brass or bronzeCoating: Internal and external with fusion bonded epoxy coating. or liquid paintingColor: blue color, black color, red color, gray color, etc Epoxy Coated.Working pressure: 25bar (350PSI)Notes:Used as auxiliary connection through which the fire department can pump water to supplement existing water supplies. Pillar Hydrant widespread and convenient in life for fire fighting. This is safety for children, because it is fixed.Must check the fire hydrant every month or before major holiday.Removing clutter around the stem end, will special wrench in rod head, check whether appropriate, turn the valve stem, filling lubricating oil. Using oil sands erasing rust stains on outlet thread, check the rubber gasket in cap are in good condition.Open the fire hydrant, check the situation of water supply, put all rusty water and then shut, and observe any slack phenomenon.Exterior paint falls off should be timely repair.Check and remove the obstacles near fire hydrant.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back