Shenzhen Kanglibang Science and Technology Co., Ltd.

Shenzhen, Guangdong, China

We are offering dbph peroxide curing agent. Dbph peroxide curing agent for silicone silicon vulcanizing agent 2, 5-dimethyl-2, 5-di(tert-butylperoxy)hexane peroxide curing agent, silicone vulcanizing agent c-15, c-16, c-16e dbph, vulcanization, coupling agent, silicone molding, anti-yellowing silicone raw material should be cured at high temperature.the cured silicone are characterized non-toxi, no bad smell, and good anti-yellowing. Widely applied to high quality required and food grade and medical grade silicone products. note:this agent is an inflammable and volatile liquid, please watch out during work time. component:1. Anti-yellowing agent 2. Peroxide 3. Polysiloxane physical properties (tested by ke-951u gel)appearance: transparent milk white subtranslucent specific gravity(gcm)(23c) 0.91.0hardness(shorea) 4951tensile strength(mpa): 1013elongation(%): 500530cracking resistance(knm) 2427compression set %(100c22h) 5 modelcuring temperatureapplication ratio c-15175c0.8-1.0% c-16180c1.5-2.5% c-16e130c1.01.2% this agent must be add by many time with a small quantity. If not, fewer electrostatic spark and over heat from barrel will cause material burning during the mixing time, the fire can be put out by foam extinguisher. notes:1. Avoid to contact with rust, heavy metal compound, metal salt, drying agent etc. 2. High vapour pressure agent easy to volatilize. Please sealed stored on free time. 3. The mixed silicone should be used up within 12 hours. If not, the curing time will be longer than before. storage and shelf life:keep in dark and ventilate place, away from light and fire.storage for 6months below 25c without open. descriptionclear, yellow liquid. Also for storage and transport mixed with inert solid.