TECH-POWER(HUANGSHAN)CO.,LTD

Huangshan, Anhui, China

We are offering antistatic agent dh101 for powder coating. "it can effectively improve the charge particles of powders to enhance powder coating transfer-efficiency. minimize the electrostatic phenomenon, and solve the problem of difficulty to spray corner and dead angle. reduce powder electricity resistance, and improve the ability of anti-electrostatic of the coating. improve pigment/binder ratio while compared with the same powder coating transfer-efficiency, thus the cost will be reduced." typical properties appearance white powderelectricity conduction group 70% water conten 1% application antistatic agent is also called electric charge modifier. Dh101 is a type of cationic substance with polar groups, on one hand, it could be able to capture more electric charge when it is polarized in high-voltage electrostatic field, on the other hand, it can reduce the resistance value of the powder particles to a certain extent so as to remove the excess electric charge quickly, it is a product with double effects of increasing electricity and anti-statics. The powder that added dh101 will be able to make the surface more smooth, and reduce the phenomenon of pinhole, big ripple and snow pattern caused by the static defects. dosage:0.1-0.3% based on total amount of coating formula, extruded with the batch.dh101 can be used for all kinds of thermosetting powder coating

We are offering flowing agent tp88 for powder coating. General description flowing agent tp88 equivalent to worlee resin flow pv88 could be used in hybrid system, polyester/tgic system, epoxy system. Hybrid system, polyester/tgic system, epoxy system.all kinds of heat resistant powder coatings.injection molding systems.excellent flow and leveling propertiesprevent cratering pinholes, fish eyes and other surface defects.good film appearance and relocatable properties.excellent uv stable and weather resistance."typical properties appearance free flowing white powder active contents(%, wt) 65 volatiles, (%wt) 4 bulk density, (g/cm3) 0.58-0.64 chemical composition sio2 + polybutylacrylate advantages provides superior flow, leveling and dispersing properties in powder coatings. Decreases probably the cost of powder coatings due to the less added amounts in the formulations than that of normal flow modifiers such as the form of masterbatch resins based on epoxy or polyester. Can be post added to a wide range of powder coatings to impart fine texture finish.