-
Min. Order (MOQ)
1000 Piece(s)
-
1. material
steel Q235
-
2.Name
steel pole line hardware
-
Surface Treatment
hot dip galvanized
-
Zinc thickness
86μm
-
Technology
press , cut , drop forged
-
Load
70kn/120kn/160kn
-
Voltage
11kv/33kv
-
Life time
more than 30years
-
Used on
overhead line
-
advantage
good price with high quality
-
.Experience
More than 12years.
-
Used with
all eye , ball socket , tension clamp, U bolt
-
.Export to
All over the world
-
Certificate
ISO9001, SGS
We offer steel pole line hardware dimensions:the dimensions on the drawings are the final dimensions after the hot dip galvanization. The design of the fittings is indicative; however the mentioned dimensions on the drawings are the critical ones.Steel pole line hardware galvanizationthe fittings shall be delivered hot dip galvanized according to the following specifications:the zinc of the electric power fitting that shall be used shall have the quality of minimum category prime western according to the category zn 98.5 according to iso-1461.then washed out with water and then flux treated and dried out.the hot dip galvanization shall be made in a zinc bath of temperature 450c and of zn-composition min. 98, 5%.the galvanization thickness of the electric power fitting shall be in average 80m thick! on an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78m and the average weight in relation to the galvanized area shall be 610 grm2.the pieces of the electric power fitting shall be after hdg free from black stains, enclosures of dirt, knobs, bubbles or any other surface defects. The hdg shall be smooth and uniform in the entire piece without any spots with too small or too big galvanization thickness otherwise the pieces will be rejected.
Additional Information:
Payment Terms :
T/T, Western Union,
Packaging Details : wooden box , cartons, woven bags
Delivery Time : 7dayds