Wenzhou Bingo IMP.&EXP. CO.,LTD.

Wenzhou, Zhejiang, China

• MOQ 1 Piece(s)
• Brand NameBINGO
• Proof Pressure50 PSI
• Operating Pressure Range20 mbar to 1000 mbar

• MOQ 1 Piece(s)
• Brand NameBINGO
• Working Pressure±0.5Mpa
• Applicationwater, sewage, acid-bases liquid
• Cablerubber, 4m(standard); length could be customized
• Installation Methodthrow-in type vertical installation
• Protection gradeIP 68
• Float MaterialSUS304/SUS316L
• Working Temperature0~150℃
• Output SignalSPST NO/NC
• Contact CapacityAC250V/2A

We are offering cable float switch. introduction: cable float switch ls-cf01 is stainless steel housing with substantial structure, cheap price and long lifetime. It has very good control effect for long distance, multiple level control, submerged pump or liquid with grain or block. Certainly it is also useful for normal liquid. it uses mercury switch to make connection output. Connection point capacity 2a250vac. it can be regulated freely and easy to operate, convenient to install, safe and reliable, without maintenance, non-toxic and environment friendly. It can resist sewage so that widely used in pool in resident, factories and mines ect., and ponds, barrel, manger and pot with oil, acid and alkali as well as the vessel with high viscosity and suspended substance.

• MOQ 1 Piece(s)
• Brand NameBINGO
• Applicationwater, sewage, oil etc.
• ConnectionG1/8″ (thread customized)
• Output SignalSPST NO/NC
• Contact CapacityAC220V/1A;DC24V/0.5A
• Working Temperature-30~150℃
• Product NameMultipoint Float Switch
• Working Pressure≤1MPa
• Protection GradeIP65
• Float MaterialSUS304/SUS316L
• Float Gravity0.7
• Installation Methodvertical installation
• Explosion-proofNo
• Wire Lengthcustomized
• Housing MaterialSUS304/SUS316L

We are offering multipoint float switch. introduction: the working principle of multi-point float switch is direct and simple. Set one point or multi-point of magnetic switch in sealed un-magnetic metal or industrial plastic tube. Fix the float with inner magnetic system in a certain place of magnetic switch in the pipe and let the float drift up and down; utilize the inner magnetic system in the float to trigger the open and close of magnetic switch to operate and control the liquid level. Its simple working principle has been proved to apply in liquid measuring under various working conditions. It is flexible to produce 1-8 float points as per demand, so it has cost advantage comparing with other types of level switch. Multi-point float level switch is widely used in level control and alarm of all kinds of industry such as electronic, electric power, chemical, water treatment, water supply and drainage, dyeing, machinery etc.

• MOQ 1 Piece(s)
• Brand NameBINGO
• Contactor longevity1, 000, 000 times
• Applied for1-6
• Pipe tie-in1″NPT screw thread pipe tie-in
• Power supply220 VAC±15%，50/60Hz
• Wiring methodterminal connection,screw fixed
• OutputSPDT
• Ambientl temperature0- 60℃
• Operation pressure10bar
• Max pressure17.5bar
• Liquid temperature0 -100℃

We are offering paddle type flow switch . introduction: it is applied to measure the liquid flux passing through the pipeline. The liquid includes water, ethylene, glycol, or other liquid which is not hazardous to brass, phosphor brass and seal capacity. This flow switch commonly used where the interlock or shut-off place is needed. characteristic: 1、used widely, such as air-condition, heating, water flow etc system where need to confirm flow rate. 2、wire easily 3、three-in-one vane : independent monel vane fit to the pipeline of 1 to 3 inch 4、adopt spdt instant flow switch, quick but high accuracy 5、each galvanizing part added extra corrosion prevention 6、screw regulate the setting point to ensure accurate flow rate 7、equipped with several flow direction blade to fit for different flow rate and diameter.

• MOQ 1 Piece(s)
• Brand NameBINGO
• Pressure RangePositive: 10mbar ~ 600mbar (Max. 800 mbar) Negtive: 10mbar ~ 800mbar (Max. 1000 mbar)
• Electrical ConnectionSolder pins 1.0 mm, 10mm distance between each other pin; or with different type wire leads and terminals on request.
• Electrical Feature1 pole NO
• Pressure connectionInlet 4.0 mm for tube connection
• MediumNon-hazardous gas only (air)
• Ambient Temperature-10~95°C
• Electrical Rating20mA, 120/250V

We are offering air pressure switch, gas pressure switch. introduction: ps-la6 is designed to detect both negative and positive pressure, such as the family vacuum cleaner. It is provided with solder pin connections and is especially designed for mounting on "printed circuit boards", as well as connecting with different wire leads, terminals and sockets. It is considered as an economical interface between pressure systems and printed circuit boards with almost no hysteresis.