Gaskets

We offer a complete product range of Corrugated Gasket, Compressed Asbestos Gasket, Modified PTFE Gasket, Metal Jacketed Gasket, Heat Exchanger Gasket and Copper Gasket

Corrugated Gasket

Brand Name Wealson

We are offering corrugated gasket. 1.structurecorrugated gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle. The corrugated gasket with inner and outer rings or composite gasket attached with flexible graphite or teflon sheet are available depending on the working location and requirement. 2.performance and features1.applicable to high pressure and high temperature location. 2.strong corrosion resistance. 3.stable and reliable sealing function. 3.scope of application1.working temperature:6502.working pressure:6.4-16.0mpa3.min.pre-tightening specific pressure:y=70mpa4.gasket coefficient:m=4.255.max.machinable size:2800mm.

View Complete Details

Ask Latest Price & Details

Compressed Asbestos Gasket

Brand Name Wealson

We are offering compressed asbestos gasket. Caf asbestos gaskets are die cut or circle cut from compressed asbestos fibrejointings sheet which are manufactured from carefully selected chrysolite fibre intimately blended with suitable heat resistant binders etc. And vulcanised into sheets of homogenous compositions and uniform thickness. Caf asbestos cut gasket seal is effected by yielding or flow of material into the imperfections of joint contact faces. In this way gasket provides an unbroken barrier of homogenous structure through which no pathway exist for escape of confined media. uses: used in the high temperature and high pressure. For the equipment in saturated vapor, super hot vapor, gas, air, gas, ammonia alkali, and inert gases and other mediums etc. And used as sealing material in the joints of pipeline. the speicifications are the same as caf asbestos jointing sheet manufacturered by wealson.

View Complete Details

Ask Latest Price & Details

Modified PTFE Gasket

We are offering modified ptfe gasket. Modified ptfe gaskets improved performance over conventional ptfe, reduced product loss and emissions. Excellent bolt torque retention, unique manufacturing process minimizes cold flow problems typical of skived and expanded ptfe sheets. Withstands a wide range of chemicals for extended service life in a wide variety of applications.

View Complete Details

Ask Latest Price & Details

Copper Gasket

We are offering copper gasket. Solid copper gasket to make a leak tight uhv seal between two conflat flanges. Oxygen free high conductivity (ofhc) copper is normally used as this sealing material as it is very clean, can easily be formed to shape, has a wide temperature range, and has a low outgassing rate. "ofhc" copper gaskets are not always needed for all requirements, we have a range of several different types of gasket materials can be used for most of the general uhv applications. prime featuresdimension toleranceoutside diameter: +0.0-0.1inside diameter: +-0.1thickness: +- 0.1ofhc copper to bs4608 grade c103, annealed to hardness 8090 brinell.

View Complete Details

Ask Latest Price & Details

Kammprofile Gasket

Kammprofile Gasket (Serrated Gasket) manufactured by Wealson consists of a metal core, generally stainless steel with concentric grooves on both sides. A sealing layer, such as flexible graphite, PTFE, and other soft asbestos free gasket materials, is usually applied on either side of Kammprofile Gasket and depending on the service duty. Kammprofile can be used without sealing layers to provide an excellent sealing but there is a risk of flange surface damage especially at high seating pressure.Basic Type Kammprofile GasketJR Kammprofile Gasket with integral Outer RingSJ Kammprofile Gasket with Loose Outer RingAPPLICATION:Kammprofile gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint. It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with metal jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections.1Temperature6502Pressure6.425.0MPa3Gasket Factorm-4.254Gasket Seatingy=70MPa.

View Complete Details

Ask Latest Price & Details

Teflon Gasket

We are offering teflon gasket. Pure ptfe gasket is made by cutting ptfe stick, pipe and sheet into flat shape, v shape gasket and valve annulus. It has 100% ptfe structure. It can be bear the most bitter chemical medium, and has good anti-creeping performance.

View Complete Details

Ask Latest Price & Details

Metal Jacketed Gasket, Heat Exchanger Gasket

We are offering metal jacketed gasket, heat exchanger gasket. Metal jacketed gasket is made from graphite, ceramic, non-asbestos etc. Filler covered with thin metal jacket, such as stainless steel, carbon steel, copper etc. By their sealing efficiently, provide outstanding resilience, while the metal jacket guarantees excellent sealing and protects the filler against pressure conditions, fluctuating temperatures and corrosion. application1temperature4502pressure6.4mpa3gasket factorm-3.754gasket seatingy=60mpa maxmum size5000mm.

View Complete Details

Ask Latest Price & Details