ZJ Green Energy Technology Co.,Ltd

We are offering nano-sphere zlnano. relative to the polymer flooding, it has the characters of less investment to ground equipment, low consumption of raw materials, high input-output ratio and a long period. In addition, the oil displacement agent can be dispersed into the oil field with water injection line. There is almost no viscosity for the initial preparation solution, with good injection and it is stable in the water. It has a good temperature and salt tolerance performance, which make it can be used in common high temperature and high salt mining areas, especially in the areas which traditional pam can’t be used. It is used widely. It has become the most popular application prospect new type of flooding agent after polymer flooding in the oil field.

We are offering non ionic polyacrylamide. nonionic polyacrylamide was synthesized with acrylamide using (nh4)2s2o8 as initiator by the method of co polymerization in aqueous solution, effects of monomer concentration, dosage of initiating agent, reaction temperature and reaction time on relative molecule ikr mass of the synthetic nonionic polyacrylamide were analyzed.

We are offering temperature and salt resistant type iii polyacrylamide. its main character is temperature and salt tolerant, improving viscosity retention rate in the wastewater with high temperature and hypersalinity. It shows good water solubility, increasing viscosity, salt tolerance, temperature resistance and good stability in actual use. It is used for eor in oil field to increase the oil pump capacity and enhance the oil production. It is with molecular weight more than 20 million and anti-temperature 80 ~ 110℃.

We are offering amphoteric polyacrylamide(zpam or acpam). the cation and anion base in its molecule can complete the synergy of anions and cations, which makes it demonstrate superior composite properties besides the general characteristics of cationic flocculant. It can be used in a wide range of ph value. It can higher the efficiency in water filter and lower the moisture content in filter cake. It can also be used in ore leaching with strong acid or extract valuable metals from the acid catalyst with metals. Amphoteric ion is not the mixing of anionic and cationic. It is applied to all kinds of waste water treatment like oil contamination, organic sewage, inorganic sewage, complex sewage with frequently water quality changing and sludge dewatering. It is also used as paper additives, oilfield water shutoff agent, and etc.

We are offering non-ionic polyacrylamide (npam). due to a certain amount of polarity gene in npam’s molecular chain which can absorb the solid particulates suspending in the water, it is easier to form large flocs. It is the most appropriate to use npam, when the sewage is acidic. It is better to use npam in conjunction with inorganic salts such as inorganic flocculant poly iron and poly aluminum. It is also used as agents for the textile pulp, paper chemicals, water shutoff agent, and etc. because of its non-ionic functional group, ph value and salts have a little influence on npam’s flocculation. In the neutral or alkaline conditions, the flocculation effect is not as good as apam, but better than apam in acidic conditions.

We are offering cationic polyacrylamide. (cpam) cpam shows electropositivity in acid or alkaline medium. There is a significant effect in the treatment of wastewater with negative charges. Its characteristics are fast floc formation, good conglobation and good resistance to compression and shear. It is very efficient in usage and has high dehydration rate. It is used for the waste water treatment in alcohol factory, monosodium glutamate factory, sugar factory, beverage factory, tanneries, dyeing and other feilds. The effect of cpam is several times higher than apam, npam or inorganic salt. It is used as flocculant in the process of tap water treatment with river water as its source, showing less dosage, effective and low cost as its advantage. It has a better effect to be used together with inorganic coagulant in particular. It can be used as paper additives as well.

We are offering anionic polyacrylamide (apam). for the sewage of a positive charge with suspended particulates and its ph value is neutral or alkaline, apam plays a role of electrical neutralization with the suspended particles and makes a bridge to form large flocs among the particulates. It is widely used in waste water treatment of chemical industry, municipal sewage treatment, such as coal washing, mineral processing, metallurgy, iron and steel industry and electronic industry. It is also used in oil industry to enhance oil recovery which is widely used. In addition, it can be used as paper additives and textile pulp agent.

We are offering nano sphere deep adjustable flooding agent. relative to the polymer flooding, it has the characters of less investment to ground equipment, low consumption of raw materials, high input-output ratio and a long period. In addition, the oil displacement agent can be dispersed into the oil field with water injection line. There is almost no viscosity for the initial preparation solution, with good injection and it is stable in the water. It has a good temperature and salt tolerance performance, which make it can be used in common high temperature and high salt mining areas, especially in the areas which traditional pam can’t be used. It is used widely. It has become the most popular application prospect new type of flooding agent after polymer flooding in the oil field.

We are offering temperature and salt resistant type iii polyacrylamide temperature and salt resistant type iii polyacrylamide is a polymer with long-chain polymerized by acrylamide. product character and main usage: its main character is temperature and salt tolerant, improving viscosity retention rate in the wastewater with high temperature and hypersalinity. It shows good water solubility, increasing viscosity, salt tolerance, temperature resistance and good stability in actual use. It is used for eor in oil field to increase the oil pump capacity and enhance the oil production. It is with molecular weight more than 20 million and anti-temperature 80 ~ 110℃.