Other Products / Services #5355825

Conveyor Tracker are coming in pair for left & Right mounting on width adjusting frame. It is important to know the speed of the conveyor and also thickness of the conveyor. Edge sensed by sensor is used to work the other side edge pneumatic Tracking Unit. Compressor Air pressure is required to operate unit.

Strain gauge type load cell a tension transducer for web tension monitoring & controlling is available in various ratings 5 Kg to 1000 Kg.

For ratings beyond 150 Kg, Up to 1000 Kg, these are manufactured in compression& tension type constructions, cater to most of the popular sizes load cells & applications.

All Load Cells are excellent in linearity and repeatability with a nominal output of 1mV/V or 2V/V depending on applications.

Winder Rewinder for Inkjet Printer, Thermal Printer, Industrial Inkjet Printer for printing mfg. date, expiry date, batch no., sr. no with using ink- jet printer. Salvage rewinding, as correcting badly wounded reels for inspection and doctoring operation.

Capacity:

• Up to 500 Tons.


• Cylinder Stroke 50 mm to 3 Meters

Trio Canter systems are essential in ensuring uniform thread distribution at the outer edges of the web. This is especially important in front of the Calendar Nip or in treating lines before the dip or surface winder.

• 
  

  We manufacture new Rewinder Unit of all sizes for your old machines like Rotogravure, Slitter Rewinder, etc.

  
  


• The units are readily available with Web Aligner Units.

advantages:

• brass fixtures


• end plugs


• different pressure rating

We have with us a range of high quality Guide Rollers that are made from selected grades of raw material. Design with precision.

Metal Expander Rolls having hard chrome surface which is suitable for high speed and high tension applications for Paper industries, particularly for slitter re-winders, Calendars, Poop Reels, M.G cylinders. On high speed machines it does not wear & tear so it is commonly used in place of Rubber Bow Roll.

Curve Bar Expander Rolls is one of the most effective devices for removing crease-wrinkles, which is normally fitted on the chainless mercerize machine. With this device, we get maximum fabric surface contact area on all the three curved bars which ensures effective removal of crease / wrinkle.

Rubber Curve Bar Expander Roll is used for removing wrinkles from Textile Processing machines.

Web Master, Tyre-cord centralizer cord-aligner, featuring for machines like, dipping plant, re-winder, calendars, let-off, wind-up stations. Available with hexagonal shaft 1-1/4- square bar for roll diameter 110mm or with 75mm shaft diameter and Roll diameter 160mm.

Available with hexagonal shaft 1-1/4- square bar for roll diameter 110mm or with 75mm shaft diameter and Roll diameter 160mm for heavy duty applications.

Scroll Rolls are wrinkle removing rolls from web materials for manufacturing, processing, Coating, converting, Scroll roll are available in different materials like Ebonite, M.S, stainless steel, aluminum.

Many type of Rubber Grooved Rolls are available as per specific requirement like Diamond Grooved Rolls, Helical Grooved Rolls, Straight Grooved Rolls etc. For winder, Diamond Grooved Rubber Roll required, Helical and Spiral Grooved Rubber Rolls can be supplied as per application requirements.

Nip Rolls, Precision Rollers are available as: concave roller, convex roller, straight roller, hubbed roller, v-groove roller, bearing cover, coated bearing, bushing, and more.

We are engaged in offering our clients with Pinch Rollers that are widely used in Rubber, Mat, Steel industries.

We offer these rollers in varied dimensions and sizes so that our range can exceed the expectations of our clients.

Key Performance Indicator:

• Giving appropriate hardness depending on type of printing


• No run out on finished diameter with reference to bearing size


• Outstanding rubber surface finish without porosity


• Dimensional accuracy


• Best printing result


• Long life


• AntiStatic


• Good abrasion resistance


• Uniform quality of film

Conpaptex Equipments Manufactures wide range of Knurling Rolls. Available in different type, Sizes and capacity for different application in the Industries. The Knurling Rollers are widely used for its durability, reliability, corrosion resistance, moisture resistance, etc.

Knurling Rollers are known as Brush Rollers also and used in Construction, Printing Machines, Rubber Industries, etc.

Some salient features of our S.S. Rollers are:

• Gives smooth finish


• Ability to withstand continuous usage


• Can handle high temperature

• Cooling Roll


• Double Jacketed Cooling Roll


• Spiral Cooling Roll

• The shell is centrifugally cast out of various bronze and stainless steel alloys. The metallurgy that is right for your specific application depends on the mills environment. All shells are drilled on a spiral pattern to assure quite operation.


• The suction box features stainless steel fabrication, and is counterbalanced to offset the seal arrangement and support the box during removal.


• The stainless steel trunnion features a bolt-on design and is sized to provide the optimum velocity while reducing noise and preventing premature separation.


• The forged steel heads are epoxy painted to prevent corrosion.

We can offer rolls made from various materials:

• Chilled cast iron (single poured)


• Chilled cast iron with nodular cast iron core (compound casting)


• Grey cast iron


• High chrome-alloy special cast iron

• From 40 GSM to 400 GSM,


• Rewinder Diameter can be achieved in our Paper Slitting Rewinding machine Up to 1300 mm,


• All types of Double Drum Type Paper Slitter Rewinder Machine are manufactured by us, which available up to 6000 mm.

We manufacture and offer a wide range of Aluminum Foil Slitting Rewinding Machine that are precisely designed and constructed to meet the standards that effectively meet the requirements of foil cutting. We offer Aluminum Foil Slitting Machines from 9 micron to 40 microns. The machine is provided with razor cutter arrangement and can slit up to 50 mm width. Jumbo Type and High Speed Slitting Machine.

Features:

• No Pack-no strap photo-electric sensor and no drive power belt.


• Max. Strap Size: 800 X 600.


• Min. Strap Size: 80 X 50.


• Speed: 2.15 Second

Application:

• All Industries for Strapping

• The improper mounting of the detector and improper arrangement of the rolls will result in unsatisfactory control performance, or will cause wrinkles to the web.


• When planning and aligning the process line, the following described items must kept in mind. If distance is too short, winkles will happened on thin or soft web.

• Air Turner Bar Systems are designed and manufactured to suit customers particular application. There are six sizes for 90- entry or 180- turnover, with web widths ranging from 100mm to 3 meters.


• The units are built as freestanding or bolt-on modules, complete with leveling braces and bolting down holes. They are designed to suit existing machine and site conditions.

Features:

• Microprocessor based interface.


• Digital display, Pre-Settable Product Counter.


• Error Display.


• Seal seat: 375(W) X 500 (L)

Application:

• All Industries for Sealing and Packaging.

Features

• Free running capability to convey very lightweight loads.


• Low cost alternative to stainless steel tube rollers.


• Plastic conveyor rollers are available in either grey and blue.


• Ideal for use in humid, wet or wash-down environments.


• Non-marking benefits when in contact with the white top surface of flat or modular belts.

Accuracy of the Distance Rings Used With the Overarm Separator Disc Can Govern the Performance of the Cutting/ Slitting Operation

CONPAPTEX Equipments Are Prime Supplier & Manufacturer Of Distance Rings For Over Arm Separator Disc An Important Component Of Slitter Tooling

• Tees


• Elbows


• Union


• Plugs


• Reduce

We manufacture all types of Blower for any make Slitter Rewinder Machine or Roto Gravure Printing Machine. Our Blower can be fitted on any size of the Un-winder or Rewinder Shaft.

TECHNICAL INFORMATION

• Maximum width of cut : 450 mm


• Minimum width of cut : 12 mm.


• Paper core inside diameter : 76 mm.


• Paper core thickness : 12 mm.


• Round Blade Diameter : 150 mm.


• Electric Motor : H.P. A.C.

Safety Chucks or Locking Assembly are square bar holding device. It can hold square bar size 1, 11/4 , 11/2, 2 or 3. Safety chucks are also manufactured in mm sizes 25mm, 32mm, 38mm, 40mm, 45mm, 50mm, 75mm as per specific requirement of weight to be handled.

Unwinding:

• If the material wound is irregular, this system guide the edge position and let it regularly into the subsequent process. The idler roll moves with the unwinding reel stand.


• Mount the detector fixed and as close to the idler roll as possible.


• The leaving web formed an angle at the deflector roll should more than 30-. if not possible, apply a pinhole added. The important, do not allow the web slip on this roll. The distance between two rolls should be more than the maximum width of the web.

FEATURES

• Modular Design, allows the controllers to be configured to exact application


• All customers adjustments are on board to simplify set-up.


• Microprocessor based control, can be used in any tension zone (Unwinder, Re-winder & intermediate).


• To enter data using keypad allows the user to scroll through the selections and values, making set-up easy.


• Indication and correction will be reliable, and efficient.


• Close loop control by measuring web tension by two load cells, insures that malfunction or wrong web tensions are corrected.