Other Products / Services #3748247

I. Indication of B.A.C. Normal Mode: 0.00 to 4.00 or 0.000 to 0.400%BAC or 0.00 to 2.00 mgl BrAC by LED display Fast (Screening) Mode: 0, Low and High 3 steps II. Sensor - Semiconductor type alcohol sensor III. Accuracy - 0.01%BAC at 0.05%BAC IV. Mouthpiece - Normal Mode : use Fast Mode: No use V. Sensor - Two 1.5V "AA" size alkaline batteries Auto Power off VI. Weights - 115g (Including Batteries) VII. Dimension(mm) - 124 (height) X 56 (width) X 41 (thickness) MAX VIII. Audible warnings - 3 steps beep warning of alcohol detection with LED display IX. Available colour - Silver Red X. Certificate - CE, FDA 510K listed, DOT, Australian Standard

i. Indication of b.a.c. Normal mode: 0.00 to 4.00 or 0.000 to 0.400%bac or 0.00 to 2.00 mgl brac by led display fast (screening) mode: 0, low and high 3 steps ii. Sensor - semiconductor type alcohol sensor iii. Accuracy - 0.01%bac at 0.05%bac iv. Mouthpiece - normal mode : use fast mode: no use v. Sensor - two 1.5v "aa" size alkaline batteries auto power off vi. Weights - 115g (including batteries) vii. Dimension(mm) - 124 (height) x 56 (width) x 41 (thickness) max viii. Audible warnings - 3 steps beep warning of alcohol detection with led display ix. Available colour - silver red x. Certificate - ce, fda 510k listed, dot, australian standard

We are offering DELTA C MARK COVERALLS.

I. Garments made of Nomex IIIA and stitched with Nomex thread which gives durability and long life to the garments. II. Nomex garment (Coverall, Jacket, Pant forms) are available in 4.5 ozsq.yd or 6 ozsq.yd III. Flame Retardant Reflective Tape is provided in case of customer's requirement. IV. Colour: Royal Blue Navy Blue Orange and Red. V. Size: S, M, L, XL, XXL. VI. As per the EN 531 specification.

We are offering POLYCOAT TYVEK QC COVERALL SUIT.

I. Economical splash protection against many inorganic acids bases and other liquid chemicals such as pesticides. II. It retains its original shape after kneeling or bending. III. Available in Coverall (with or without attached hood), Jacket, Pant, Hood, Sleeves, and Shoe Cover made out of "TYVEK QC".

I. Made out of heavy duty chrome leather II. Stitched with Kevlar thread III. Consist of coat (with full sleeves) & Pant. With front brass button. IV. Size & length of coat can customize as per client requirement. V. Suitable at area where heavy welding is done.

I. Type 4 protection breathable II. The new Cool Suit Advance features stitched and taped seams for Type 4 protection along with a unique flap covering the breathable Safeguard panel, sealed along these top and sides and open at the bottom thus allowing free circulation of air in and out of the coverall and providing a superior level of comfort. III. The Bellows Effect is well known principle that aids the effectiveness of Cool Suite technology. When the wearer moves such as in any walking movement, the air inside a suit shifts around creating micro-changes in air pressure and resulting in air being sucked and blown through available apertures. In the case of cool suit this helps air to exchange through the breathable panel and vents and providing the user with a superior level of comfort compared to any other Type 4 garment.

I. Viscose rayonpolyester-based nonwoven fabric with offering splash & dust protection with flame retardancy. II. Soft & breathable fabric III. Reinforcing nylon scrim to inside for additional strength IV. Unique fabric combines light splash protection, dust protection and flame retardancy V. Can be worn over standard flame protective work-wear without compromising flame protection in most cases flame protection is improved. Tested in multilayer ensembles for predicted body burn using thermal mannequin test equipment to prove an increase in thermal protection and a reduced body burn incidence see detailed Pyrolon leaflet for further information VI. Meet Latest FR standard EN 14116:2008

I. Viscose rayon polyester PVC film composite fabric provides a chemical protective suit that will not burn, even in a forced ignition situation. II. Soft and flexible fabric. III. Ideal alternative to standard disposable chemical suits in fire risk areas such as petrochemical and refining plants. IV. Combines Type 3 & 4 chemical spray protection and flame retardancy. V. Fabric will not ignite even in forced ignition situations. VI. Can be worn over standard flame protective work-wear without compromising flame protection in most cases flame and heat protection is improved. Tested in multilayer ensembles for predicted body burn using thermal mannequin test equipment to prove an increase in thermal protection and a reduced body burn incidence. VII. Meets latest FR standard EN141116:2008. VIII. Fully stitched and taped seams for impervious seal. IX. Also available in orange.

I. Thermal protection chemical repellency. A single garment offering protection against chemical splash, flame and heat, molten splash and electric ARC. II. Unique fabric which combines chemical, flame, heat and molten splash and electric arc protection in one garment. III. Soft and flexible fabric. IV. Bright orange colour for easy visibility V. Type 3 & 4 chemical protection VI. Chemical barrier film is the same as Pyrolon CRFR so the same chemical permeation times apply VII. Certified to latest FR and Arc protection standards. VIII. Features high Arc protective rating of 21.9calm2 ( according to US Test ASTM F1959M-06a) IX. Ideal where both chemical and heat protective are required in dirty or damaging environments; to reduce expensive protection garment. Ideal for contractors or cleaning processes.

We are offering Interceptor - Coverall.

I. Interceptor is your first line of defense against extreme chemical hazards. II. Interceptor is the apex of Lakeland Industries chemical protective clothing line. III. Manufactured to both NFPA 1991 and CE type 1 requirements and available in encapsulating and non-encapsulating configurations, there is an Interceptor suit for your needs be it gas, vapour, aerosol, liquids, harmful contaminants or particulate protection. IV. PTFE visor process permanently seals the visor into the suit with no sewing involved so that liquids cant penetrate the visor edge. V. Certified to optional Flash Fire Protection for Escape Only requirements of NFPA 1991. VI. Available in NFPA 1991 and CE Type 1 certified ensembles as well as non-certified encapsulating and non-encapsulating configurations. VII. PTFE outer layer on visor prevents impairment of vision due to chemical contact. VIII. All NFPA certified Interceptor ensembles include Tingley HazProof boots and a storage bag.

I. Let Fyrban protect you from electrical shock and Arc Flash hazards with our 51 Cal Arc Flash Suit. Fyrban Arc Flash clothing is made to the hightest of standards, with quality features built in for everyday performance. Be safe with a leader in Arc Flash PPE. II. Two Layer Hood: -13oz. Indura Ultra Soft Outer Layer -9 oz. Indura Ultra Soft Inner Layer -Hanger loop attached to top of hood -Face Shield attaches with Velcro hook and loop III. Two Layer Coat: -13oz. Indura Ultra Soft Outer Layer -8oz. Indura Ultra Soft Inner Layer -Velcro front closure -Knit wristlets seal around wrists -Stand up collar -Raglan sleeve design offers superior freedom of movement -32 length for full coverage IV. Two Layer Bib Overalls: -13z. Indura Ultra Soft Outer Layer -9oz. Indura Ultra Soft Inner Layer -Adjustable loop and buckles on bib strap -Tear drop style swing pockets hold plenty of items -Velcro leg openings with gussets make for easy on and off V. Carry Bag for Arc Flash Suit: -Bag holds complete arc flash suit: Hood, Coat and Bib Pants

I. Very effective and tested to IS 9167 (1979) and IS 6229 (1980). II. Most durable can be reused for 6 months. III. Made of soft, pliable and sturdy synthetic rubber. IV. Withstands temperature from -25 deg. C. to 100 deg. C. V. Very light in weight. VI. Most comfortable as it has smooth surface. VII. Std. size: Fits all. VIII. Non-allergenic and non-toxic. IX. Reflects sound waves very effectively. X. Packed very attractively with reusable container. XI. Colours: Blue Orange, (visible as well as concealed look.)

We are offering Eye Wash Nozzles (Hand operatedFoot Operated).

I. Eye Wash can be operated by hand or foot. II. Material of construction -Pipe: GI heavy grade confirming to IS: 1239 -Bowl for eyewash: Highly visible yellow anti corrosive plastic -Eye wash nozzles: Highly visible Black anti corrosive plastic (Atomizer).

We are offering Eye Wash Auxillary Pipe.

I. Eye Wash can be operated by hand. II. Material of construction -Pipe : Stainless steel pipe 304 grade confirming to Schedule 40 -Bowl for eyewash : Stainless steel 304 grade IC -Eye wash nozzles : Stainless steel 304 grade IC -Body Spray Knob : Stainless steel 304 grade IC

ht designs gravity-fed flow begins immediately when the nozzle pull strap is removed. III. Porta Stream I is supplied with either 2.07L of Eye-saline concentrate which when mixed with tap water provides 22.7L of eye-saline solution, or Fend-all Preservative, enough for 53-61L of water. IV. This portable unit may be mounted on a wall, mobile cart or mobile stand. V. 6 Gallons capacity.

Porta Stream II delivers 15 minutes of uninterrupted flushing without costly plumbing. Porta Streams simplicity of installation & operation has made it a popular choice. It is Self-contained and features a nozzle strap that is easily removed to activate flushing, leaving hands free to hold eyelids open. Porta Stream II is supplied with either 2.07L of Eye-saline concentrate which when mixed with tap water provides 22.7L of Eye-saline solution, or Fend-all preservative enough for 53-61L of water. This portable unit may be mounted on a wall, mobile cart or mobile stand. 16 Gallons capacity.

We are offering Eye Wash, Face Wash and Shower.

I. This unit is essential in areas where large amounts of chemicals are used, handled or stored. II. The decontamination unit is complete safety station which immediately discharges copious amounts of water on the whole body of the injured person. III. Unit consists of several self-cleaning spray nozzles and gets activate by working on platform. IV. Material of Construction - GI

We are offering 15-MINS PORTABLE EYE WASH STATION.

I. Portable gravity operated eye wash station features a 16-gallon capacity II. FDA high-density polyethylene tank that provides for over 15 minutes of full pattern flushing at 0.4 gpm. III. Pulling the yellow activation arm down to the open position activates unit. IV. Tank has handle on top to allow easy handling. V. A wide-fill opening with threaded cap permits easy inspection, cleaning and filling. VI. Model supplied with wall bracket and bacteriostatic additive to permit storage of water for up to six months.

I. Specially made single entry stainless steel cabinet equipped with stainless steel shower and eyewash with provision of sliding curtain. II. Product is ideal for highly sensitive equipment areas to avoid water spread III. Material of construction -Shower Head 8diameter stainless steel 20 GPM flow control -Shower Valve 1 stainless steel ball valve with stainless steel pull rod -Eye wash spray head assembly Two GS-plus spray heads mounted on stainless steel supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water -Eye wash valve - 12 IPS SS push plate -Wall of cabinet - 16 gauge type 304 stainless steel at the bottom and 18 gauge 3 sided wall of cabinet is matt finish and welded seams. -Pipe and fittings - All pipe and fittings are of stainless steel 304. -Supply 1 NPT T top and bottom female inlet -Waste 4 NPT female outlet -Sign with reflective tape and identification sign

I. With high impact resistance, panoramic and crystal clear view. II. Glare reducer. III. Anti-scratch properties. IV. Available in different colours (green, brown, grey and clear). V. Meets international standards of ANSI - Z -87 - 1 - 1989 and U/C BS 2092 BIS - 7524 (I, II, III) and as per OSHA.

I. Made from high heat resistant non-metallic composite material. II. Specially designed for working near furnace. III. Made from high heat resistant non-metallic composite material to reflect 90% radiant heat. IV. Cobalt blue visor for radiation & heat resistance. V. Aluminium adjustable head band. VI. Standard Size 16 x 10

I. Ensures worker safety II. Reduces training time III. Removes the need for service and maintenance IV. Offers adjustable alarm levels V. Gives real time gas reading or life left indication VI. Provides self-test and test due indication functionality VII. Combines with the Crowcon C-Test station for bump testing

I. ATEX approval II. Detection from up to 30m away in standard mode, 100m with a reflector III. Compact and lightweight - only 600g IV. 5 hour battery V. Automatic ranging

I. Up to four gases measured II. Infra-red carbon dioxide sensor version for safe area use (i.e. non-explosion risk areas) III. Digital interchangeable i-module sensors for full flexibility IV. Loud 94dBA audible alarm with selectable tones V. Unique dual colour red/blue visual alarm VI. Built in vibrating alarm as standard VII. Rugged and robust, IP65 ingress protection VIII. Simultaneous 4 gas display with automatic backlight IX. Peak mode operation X. TWA reading recall XI. Data & event logging XII. Simple IR interface to PC

I. Helmet shell made up of reinforced fiberglass polyester resin. II. The cotton head band or 4 point plastic suspension gives the helmet a secure well balanced protection. III. Resists heat, heavy impact and scratch proof. IV. Available in matt or glossy finished. V. Colours: White, Red and Yellow. VI. Approved And Certified: DGMS BIS: 2925.

I. Fiberglass Reinforced Plastic (FRP) for protection of head against the hazard in firefighting. II. The neck protector provided in the helmet guards against water splashes and are plated with anti-concussion tapes. III. Available in black and yellow colour.

We are offering point of use regulator. Stainless steel diaphragm standard 10 m sintered bronze filter at inlet of main valve assembly 1.6 m internal surface finish as standard cleaned for oxygen service bubble tight shut-off inlet pressure: 40 bar (580 psi) outlet range: 0 to 10 bar (150 psi) flow coefficient: cv 0.05 design pressure: 1.5 times working pr. all connections: 1/8 npt (f) seat: ptfe max. Operating temperature: ptfe 66 c inlet end connection: 1/8 npt (f) outlet end connection: 1/8 npt (f)

I. Cryogenic aprons provide a high-level of thermal protection to the torso and upper legs in harsh cryogenic atmospheres. II. Multi-layered construction allows for a maximum level of thermal protection, and a waterproof nylon outer shell protects from cryogenic splashes. III. For added safety and function, cryogenic aprons have quick-release buckles at the neck and waist.

I. Super Performance 3 - position earmuff for people working in extreme noise environments. II. Especially suitable for low - frequency noise. III. Can be worn with other PPE. IV. Quick - click height adjustment that stays in position during use. V. Made in Sweden. VI. CE approved.

We are offering Bilsom Ear Plug Dispenser.

I. Practical, job-right and economic applicator II. Clean and fast expenditure of Bilsom ears protection plugs III. Easy to use, from every level quickly refilled IV. Easy wall attachment at the entrance of noisy areas V. Effective reminder of the necessity to carry ear protection VI. Ear protection is available, where it is needed

I. Soft, foam ear cushions provide good comfort and secure fit II. Can be worn with the headband behind the head for compatibility with hard hats III. Ear cups adjust easily for a customised fit IV. Bright red colour for easy identification V. Lightweight design

We are offering EYE WASH (HAND OPERATEDFOOT OPERATED) SS.

I. Eye Wash can be operated by hand or foot. II. Material of construction -Pipe : Stainless steel pipe 304 grade confirming to Schedule 40 -Bowl for eyewash : Stainless steel 304grade IC -Eye wash nozzles : Stainless steel 304grade IC

I. Portable Shower Head is fitted with pull chain for body wash on the wall. II. Material of construction -Self closing valve: Gun metal -Shower head: Highly visible yellow anti corrosive plastic. -Pull chain : MS Galvanised

We are offering Stainless Steel Wall Mounted Shower Head.

I. Shower is fitted with pull chain for body wash on the wall. II. Material of construction -Self closing valve - Stainless Steel 304 grade IC -Shower head Stainless steel 304 grade IC -Pull chain Stainless Steel 304 grade IC.

I. Eyewash bottles are specially designed to be filled with clear water. II. It is very soft & effective for eyewash in seconds. III. User only has to turn his head slightly downwards to come in contact with the spray head of the bottle. IV. Eyewash bottle comes of 500ml

We are offering MULTIPLE NOZZLE PLATFORM SHOWER.

I. This unit is essential in areas where large amounts of chemicals are used, handled or stored. II. The decontamination unit is complete safety station which immediately discharges copious amounts of water on the whole body of the injured person. III. Unit consists of several self-cleaning spray nozzles and gets activate by working on platform. IV. Material of Construction - GI

I. Deck mounted eye wash shower is easy to operate by pushing the push plate. II. Material of construction: -Pipe: Stainless steel pipe 304 grade confirming to Schedule 40 -Height: 22inch, Full Length: 36inch, Inner Diameter: inch, Outer Diameter: inch -Nozzle for eyewash: Stainless steel 304 grade -Outer Diameter: 0.5inch -Push plate: Length 4inch -Breadth 3.5inch -Thickness: 3mm -Ball Valve: SS 304, inch -Eye wash nozzles: SS 304 Grade -As per BIS 10592:1982

I. Lift front goggle has shade No.11 glass filter with polycarbonate cover & chipping lens. II. Green soft PVC frame for comfortable wear, ABS lens holder. III. Four indirect valves (PE) in the frame and be used. IV. Effective valve design promotes air circulation over lens area to reduce fogging.

I. Neotherm Aulektro cobalt blue glass II. Used for furnace or klin viewing III. Size: 3 x 4 , 32mm diameter, 53mm diameter, 37mm diameter, etc. IV. Size available as per client requirement. V. Made in Germany. VI. Type: -12 DIN -14 DIN VII. Colour: -Green (B) -Blue (BL) -White (W)l

I. Made from injection molded high flexible polypropylene material. II. Very sturdy and light weight. III. With adjustable ratchet head gear. IV. Standard vision 110 mm X 85mm V. Available in black colour only.