Mumbai, Maharashtra, India
Our Products
It Consists Of :
Basic Display cum Processor Unit
With Two Line Alpha Numeric Display.
Dimensions: 170mm X 140mm X 100mm
Boom Length in Meters.
Radius in Meters.
Boom Angle in Degrees.
Load In Tons.
Indications :Hook over hoist AlarmOver Load AlarmFull range available
Are used for non proportionate cylinders of hydraulic cranes
Available in 1/8 BSP, 3/8 BSP, NPT, BSP, M8 x 1.25 pitch, M12 x 1.5 pitch, M14 x 1.5 pitch
Customized size as per enquiry
Available in Anti rust plating
Manufactured in harden steel
Grade SAE 100 R 280
Maximum capacity of 275 Bar
Available in only BSP Threads
Maximum length of hose is 1 mtr
Versatile design
Line rider dynamometer is an assembly of 3 sheaves with bearings, load pin is located in the middle sheave.
All the 3 sheaves are manufactured in self lubricated material.
Load pin is IP 65 graded.
Customize sheaves sizes on request.
Load pin is temperature compensated for increased accuracy
Can be installed easily
Load Pin is strain gage based sensor with full temperature compensation over 0 - 60 C.
Load Pin is constructed from SS 17-4 ph grade for corrosion and shock load resistance.
Analog signal converter - 0 - 10 VDC or 4 - 20 mA for PLC interface.
Used for both lattice boom crawler cranes and telescopic boom cranes
Encloser is IP 65 graded quality
Junction box for luffing jib
Electrical wiring junction for main boom load, main boom A2B, luffing jib angle, luffing roller drum, main boom roller drum
Imported connecters are used for wiring junctions
Guiding wire rope for proportional & non- proportional boom of hydraulic cranes
Robust design
Manufactured in SS-316 graded quality
Easily installable
Maximum capacity of 8 mm wire rope
Adjustment available for proportionate wire rope
Are used for cutoff system of Pick & Carry Cranes
Available in 1/2 BSP, 3/8 BSP, 1 1/16 UNF JIC type threads
Customized size as per enquiry
Available in Anti rust plating
Manufactured in harden steel
| Model 3WE10A33/CG24N9K4Max. operating pressure 315barMax. flow pressure 120 l/minDirect solenoid operated directional spool valveWet pin AC or DC solenoid operating coil removable | |
| Coils can be replaced without opening the pressure tight chamberElectrical connections available as either individual connections. | |
| No moving parts, uses electronic chipIP 65 Graded Encloser.Sensor can be left hand or right hand cab mounted, will automatically adjust for the side it is installed on.Ideal for monitoring: Main Boom, Luffing Jib, Live Mast, Custom | |
| Applications.Measuring ranges 30and 90Robust design, high shock durability (20000g)High stability over temperature and timeSingle +5 V supplyRatiometric analog voltage outputs / direct calibrated values.Dual axis inclination measurement (X and Y) | |
| No moving parts, uses electronic chipIP 65 Graded Encloser.Sensor can be left hand or right hand cab mounted, will automatically adjust for the side it is installed on.Ideal for monitoring: Main Boom, Luffing Jib, Live Mast, Custom | |
| Applications.Measuring ranges 30and 90Robust design, high shock durability (20000g)High stability over temperature and timeSingle +5 V supplyRatiometric analog voltage outputs / direct calibrated values.Dual axis inclination measurement (X and Y) | |
Entire control unit is of IP 65 Graded quality
Easily installable
Combination of 3 parts (Power Supply, Electrical Wiring Junction, Hooter System & Hooter cutoff )
Imported connectors are use in electrical wiring junctions
Best quality cables are used
Relay Logic Circuit is provided
The A2B Limit Switch monitors the load block to its relationship with the head of boom.
Users receive an audible hooter and visual warning on the display when anti two block event happens
Electronic circuitry is potted for full humidity protection
Counter weight with the help of wire rope keeps the switch closed until the hook block strikes it.
| Extended Temperature Range100 V/m EMI ProtectionReverse Polarity ProtectionCompact Outline | |
| The typical load accuracy is 1% error of maximum capacity-40C to +125C Operating Temperature RangeBurst Pressure 5XProof Pressure 2XBSP thread allowing a leak-proof, all metal sealed system.Used only for telescopic boom crane | |
Maximum capacity of 100mtrs cable on it
Manual Drum Locking System
Foldable lever for easy rotation of drum
Safety cage with attractive design
Cable end is fixed on tip of the boom
Easily installable design
Body Manufactured in SS316 graded quality
Anti shock resistive structure
Maximum capacity of 100mtrs cable on it
Manual Drum Locking System
Foldable lever for easy rotation of drum
Safety cage with attractive design
Cable end is fixed on tip of the boom
Easily installable design
Body Manufactured in SS316 graded quality
Anti shock resistive structure
Designed for proportional hydraulic crane booms and non-proportional booms with a maximum boom extension of 147.67 ft (45 m)
Cable end can be terminated at the end of the first telescoping section on proportional boom,
The Cable Reel can be left or right hand cab mounted, the Length sensor will automatically adjust its orientation
BALD is pre-calibrated, and can displays the length automatically.
Combination of two transducers in a single unit.
Length sensor is driven by gear combination.
The encloser of length sensor & angle sensor is IP 65 Graded.
For Angle Sensor
Dual axis inclination measurement (X and Y)
Robust design, high shock durability (20000g)
High stability over temperature and time
Single +5 V supply
Angle sensor is precalibrated and displays boom angle automatically.
Potted electronics for increased water proof protection
Encloser is IP - 65 Graded quality
Supply required voltage for load pin Line Rider Dynamometer
