Our Products
GENERAL SPECIFICATIONS OF HYDRAULIC POWER PACK (Fixed Displacement) |
TYPE / DESCRIPTION | PUMP | ELECTRIC MOTOR | TANK CAPACITY | |||
Fixed Displacement Compact Type Packaged Systems | Single Vane Pump | 0.5 HP to 10 HP | 20 to 100 lt | |||
Single Gear Pump | 0.5 HP to 10 HP | 20 to 100 lt | ||||
Double Vane Pump | 3 HP to 12.5 HP | 50 to 150 lt | ||||
Double GearPump | 3 HP to 12.5 HP | 50 to 150 lt | ||||
Fixed Displacement Standard Packaged Systems With Controls | Single Vane Pump | 12.5 HP to 75 HP | 100 to 1000 lt | |||
Single GearPump | 12.5 HP to 75 HP | 100 to 1000 lt | ||||
Double Vane Pump | 15 HP to 100 HP | 150 to 1200 lt | ||||
Double GearPump | 15 HP to 100 HP | 150 to 1200 lt | ||||
Fixed Displacement Large Packaged Systems with Controls | Single Pump Unit | 80 HP to 150 HP | 1100 to 7000 lt | |||
Multi - Pump Unit | 100 HP to 500 HP | 1250 to 10,000 lt |
GENERAL SPECIFICATIONS OF HYDRAULIC POWER PACKS (Variable Displacement) |
TYPE / DESCRIPTION | PUMP | ELECTRIC MOTOR | TANK CAPACITY | |||
Variable Displacement Compact Type Packaged Systems | Variable Delivery Vane Pump |
2 HP to 12.5 HP | 50 to 150 lt | |||
Variable Delivery Piston Pump |
2 HP to 12.5 HP | 50 to 150 lt | ||||
Variable Displacement Standard Packaged Systems With Controls | Variable Delivery Vane Pump |
15 HP to 75 HP | 100 to 1000 lt | |||
Variable Delivery Piston Pump |
15 HP to 100 HP | 100 to 1000 lt | ||||
Variable Delivery Multi - Pump Unit |
15 HP to 150 HP | 150 to 1200 lt | ||||
Variable Displacement Large Packaged Systems With Controls | Variable Delivery Single Pump Unit |
100 HP to 200 HP | 1000 to 7000 lt | |||
Variable Delivery Multi - Pump Unit |
160 HP to 1000 HP | 1250 to 20,000 lt |
A wide range of hydraulic accessories for Hydraulic System and Machine Tools are offered along with other hydraulic machines, system and equipments, making Crane-Bel International yourSINGLE SOURCE SUPPLIER FOR COMPLETE HYDRAULIC REQUIREMENTS.
Honeycomb Stainless Steel Heat Exchangers:
Honeycomb structured all stainless steel hydraulic heat exchangers are amazingly compact in size. The complex geometry offers a heat transfer co-efficient not available in any other industrial heat exchangers.
No-POWER AIR OIL COOLER FILTER UNIT
It is a miraculous system for removal of Heat and Contamination from hydraulic or lubrication oil, consisting of a self driven fluid motor, air oil coolers and an online filter that do not require any additional/external power for operation.
Air Bleed Valve
It is aunique valve , which lets air pass to the drain and shuts off the oil flow. It is used for pump Priming and to remove the air trapped in the system.
Auto-Indicating Inlet Filters:
These filters are provided with integral air bleed and bypass valves to protect the pump against damage.
Portable Filter Unit:
A revolutionary product for on site Pro-Active Maintenance of a fluid system by removing the contamination from the hydraulic or Lubrication oil in the Dialysis style without shutting down the plant, machine or system.
Mobile Vacuum oil De-Hydration/ Purification System:
Crane-BelInternational offers a fully automatic system for complete contamination control including dirt, water and air removal having an unmatched performance.
TARGET- PRO PARTICLE COUNTER:
Spin- On Return Line Filters
Pressure Line Filters
Magnetic Filters & Tank Cleaners
Anti-Cavitation Suction Strainers
Filler Breather Strainers
Level Gauges
Accumulators
Accumulator Charging Kits
Pressure Switches & Transmitters
Pressure Gauges
Pressure Gauge Protection Valves
Pressure Gauge Snubber
Temperature Indicators & Controllers
Hose Pipes & Fittings
Zero Leak Pipe / Tube Fittings
Seals & 'O' Rings
Manifold Blocks & Flanges
Pressure Check System
Hydraulic Testing Equipments
Flexible Couplings
Coolant Pumps For Machine Tools
Crane-BelInternational offers complete engineering back up for application engineering Hydraulic Cylinders are offered with a complete range of fluid power products making Crane-Bel a "Single Source Supplier" for your complete Hydraulic requirements and thereby ensuring a SINGLE SOURCE RESPONSIBILITY.
Crane- Belhas technical know and expertise to manufacture the hydraulic cylinder for avariety of applications even for the extremely critical ones. Each hydraulic cylinder atCrane- Belis built with the unmatched features to give you job-matched top performance and proven reliability at a price that wont stretch your budgets.
Crane- Belhydraulic cylinder provides reliability you can count on with the minimum maintenance year after year. Increased productivity and lower operating cost are other benefits of theCrane-Belhydraulic cylinders which are equipped with the following important components:
BARRELS
Crane-Bel hydraulic cylinder barrels are made from the imported Cold Drown Seamless Steel Pipes for reliable long life performance.
SEALS
The seals are critical components of the hydraulic cylinders.Crane Belhydraulic cylinders are provided with Unique Mecastal Piston Rings. For the static holding applications, special "Elastor static pressure energized seals are provided, which offer positive sealing and maintenance free operation.
PISTON RODS
Piston rods are made of Medium Carbon Steel and are Hard-Chrome Plated and Ground to provide a smooth, hard and scratch resistant surface for long life trouble free operation.
PISTONS
One -piece, wide surface pistons ofCrane-Belhydraulic cylinders are made of special grade fine grained Cont. Cast Iron to withstand the heavy bearing loads, wear and impact during the operation of the cylinders.
END CAPS & TIE RODS
These are the components, which are subjected to heavy bearing loads, stresses and impacts during the operation. Hence these are made out of best- suited high strength steel for greater product reliability and to meet requirement of the above properties.
GENERAL SPECIFICATIONS OF CRANE-BEL HYDRAULIC CYLINDER :- |
TYPE / DESCRIPTION | APPLICATION | PISTON SEAL | BORE RANGE IN mm (inch) | STROKE RANGE IN mm (inch) | ||||
Medium Duty Service Tie Rod Construction Double Acting Hydraulic Cylinders | High Speed Continuous Pressure | Mecastal | 25 to 250 (1" to 10") |
25 to 1500 (1" to 60") |
||||
Pressure Holding Application | Elastor | 25 to 200 (1" to 8") |
25 to 1500 (1" to 60") |
|||||
Heavy Duty Service Tie Rod Construction Double Acting Hydraulic Cylinders | High Speed Continuous Pressure | Mecastal | 50 to 600 (2" to 24") |
50 to 2000 (2" to 80") |
||||
Pressure Holding Application | Elastor | 50 to 600 (2" to 24") |
50 to 2000 (2" to 60") |
|||||
Heavy Duty Service Welded Construction Double Acting Hydraulic Cylinders | High Speed Continuous Pressure | Mecastal | 80 to 900 (3" to 36") |
50 to 3000 (3" to 120") |
||||
Pressure Holding Application | Elastor | 80 to 800 (3" to 32") |
75 to 3000 (3" to120") |
Round Holes | Spanners | Free Wheels | Helical Grooved Shapes | |||
Square Holes | Pliers | Cycle Cranks | Profiles With Male Key | |||
Lined Holes | Wrenches | Connecting rod | Races of Ball Bearings | |||
Grooved Holes | Sprockets | Track Links | Cages of Roller Bearings | |||
Splines | Kick Levers | Clutch Hubs | Channels in Bushings | |||
Racks | Saw Blades | Sector Gears | Connecting rod Ends | |||
Key Ways | Pump Bodies | Selector Gears | Involute Splines in Gears | |||
Special Shapes | Bushes | Steering Racks | Contours of Pump Body |
TYPE / DESCRIPTION | CAPACITY RANGE IN TONNES | STROKE RANGE IN mm. | CUTTING SPEED IN M / MIN. | RETURN SPEED IN M / MIN. | ||||
Vertical "C" Frame Hydraulic Broaching Machines | 10 - 100 | 450 - 1500 | 6 to 10 | 20 to 30 | ||||
Vertical Hydraulic Surface Broaching Machines | 10 - 75 | 800 - 1600 | 5 to 12 | 15 to 30 | ||||
3 - Way Universal Hydraulic Broaching Machines | 10 - 75 | 800 - 1100 | 5 to 12 | 15 to 30 | ||||
Vertical Internal Pull - Down Hydraulic Broaching Machines | 6 - 75 | 600 - 2000 | 6 to 15 | 20 to 40 | ||||
Horizontal Hydraulic Broaching Machines | 3 - 50 | 600 - 1500 | 6 to 15 | 20 to 40 |
GENERAL SPECIFICATION OF HYDRAULIC PRESS :- |
TYPE / DESCRIPTION | APPLICATION | CAPACITY RANGE IN TONNES | STROKE RANGE IN mm. | ||||
Gap Frame / C- Frame Type Hydraulic Presses | Punching, Bending, Stamping, Pressing & General Applications | 5 to 300 | 100 to 300 | ||||
Double / Triple Action Hydraulic Presses | Sheet Metal Working, Deep Drawing | 50 to 2000 | 300 to 1200 | ||||
H - Frame / Straight Side Hydraulic Presses | Cold Forming, Coining, Powder Compacting, Blanking, Trimming, Moulding | 25 to 1000 | 200 to 1000 | ||||
4 - Column Type Hydraulic Presses | Pre - Forming, Trimming, Piercing, Coining | 100 to 2000 | 300 to 1000 | ||||
4 - Piller Type Hydraulic Presses | Transfer Moulding, Powder Compacting, Rubber / FRP/ DMC Moulding, Forming, Sheet Metal Working | 40 to 1000 | 250 to 1200 | ||||
Multi-Day Light Honeycomb S.S Platen Hot presses | Lamination & Boards manufacturing, rubber molding break lineing & other similar operations. | 100 to 2000 | 200 to 2000 |