Ahmedabad, Gujarat, India
Verified
Add Review
Our Product / Services
Special pulsation damper without gas chamber also available on request
Pulsation damper with inbuilt Non return valve and two way connections are available on request.
Applications :
|
the motors are available from 63 to 355 frame size and in 2 pole to 16 pole design.
foot horizontal b3, vertical v5/v6, flange horizontal b5 , vertical v1/v3, face horizontal b14 , vertical v18/v19, foot cum flange b35 , foot cum face b34,
the stator housing & end shields are of c.i. Grade fg 200 of is:210 1978 & machined to close tolerance. Motors of 63 to 90 frame can be offered in aluminium die cast body. Foot mounted motors are with integral feet.
the stator & rotor cores are made of low loss , high quality magnetic steel.
all castings are coated with red oxide primer and final coating is of coffee brown shade.motors with different shade / colour can be given.
the motors confirm to following national & international standards.
stator windings consist of modified polyester enamelled copper wire confirming to type ii of is : 4800 part v.
the complete range of motors is provided with high pressure aluminium die-cast rotors. ( copper rotor available on request)
the shaft is made of steel-grade 40 c8 of is :1570 (part2) , 1979, shaft of special steel i.e. En , en 31 , ss 431 etc. Can be made available.
motors are offered with effiency confirming to eff 2 of is: 12615 motors confirming to eff 1 can be offered. The variation in effiency between 60% to 100% load is nominal which ensures low losses at partial loads.
the terminal box is aluminum casting & can be rotated in steps of 90.
the motors are suitable for 415 + 10% v , 50 + 5% hz , however motors suitable for opration at 110 to 650 v & 25 to 75 hz can be given.
motors are suitable for 45c ambient temperature .however motors suitable for different ambient conditions can be offered.
noise level of motor is maintained as per is:12065 specifications.
motors are available in ip 55 protection as per is:4691.
motors are with class f insulation with temperature rise of class b limits. Motors in class a, b, h can be offered. The slot linings are either provided with double cuffing or edge binding at the slot month. To strengthen insulation surge test is carried out on all windings to ensure their healthiness.
the external cooling is brought about by plastic or metallic bidirectional centrifugal fan ad cooling confirms to ic-411 as per is:6362. The fan cover is of corrosion protected sheet metal.
the rotors & fan are balanced separately on precision balancing machine to normal class as per is:12075 , which results in low vibration levels.
torque motors , brake motors.
cooling tower motors,
double shaft , special shaft.
multi speed.
special voltage / frequency
dual voltage / dual frequency
crane duty / lift duty suitable for s1 to s9 , duty different c.d.f. And various no of starts / stops / reversals.
suitable for different service factors.
suitable for vvvf operation
nema and iec frames.
Manual Hydro Test Pumps are portable type and can be easily handled by one man. The pump unit mounted on fabricated M.S. Pail, which stores liquid for testing, as well as provide self base for testing. Manual Hydro Test Pumps are available with CI MS GM SS Body, MS Fabricated Pail having water filling capacity 9 , 12 or 22 liters , SS Piston , CI MS Handle SS Check Valve, Brass Pressure Release Cock , 4 Dial Pressure Gauge and 1.5 meters pressure Hose with end connections .
we are doing flow measurement and flow meter /water meter calibration at our factory or at customers premise with nabl certified ultrasonic flow meter.
measurement done by our trained engineer at your site without disturbing pipe line. However certain rules applicable for proper measurement of flow.
we also do repairing of water meter and flow meter of any brand.
ps type pumps are used in paper & pup industry, food industry, sugar industry .efficient plants, sea water desalination plants, chemical & petrochemicals industry, power stations and absorption plants in environmental engineering & etc.handling of pulp & paper stocks up to 5% consistency heavily contaminated liquids, raw sewage, chlorinated water & etc.
horizontal back pull out design pumps. Closed and semi open impeller construction with taper roller bearing on both end and designed in accordance with ansi b 16.5.
back pull out designsteady flowenergy efficientsturdy constructionlow npsh
noise & maintenance freeenvironment friendlyshaft defection below 0.055 mmsimple external axial adjustment for impeller wear & tearto pump the pulp as like water
|
Capacity |
Up to 2500 M3/Hr |
|---|---|
| Head | Up to 80 Mtrs (262 Feet) |
| Temperature | Up to 140 C (284 F) |
| Casing Pressure | Up to 22 Kg / cm2 |
| Pump size ( Delivery bore) | 65 mm to 400 mm |
| Speed | Up to 1480 rpm |
| Direction of rotation | Clockwise from drive end |
Oil less construction (no lubricating oil or grease required) needs no maintenance. High pressure output comes from efficiency-oriented no nonsense design Differential operation (one suction and two discharges per cycle)keeps the discharge fluctuations very low. Close coupled construction eliminates problems normally associated with the motor drive, such as belt slipping. Design that fully utilizes rolling frictions (utility model and design registration being applied for)keeps the starting torque to minimum and provides maximum output. Simple and rugged construction permits easy disassembly cleaning. and re assembly. Compact and super lightweight structure makes it handy and portable. Newly developed universal nozzle permits almost every washing job with wase.
Air conditioner cleaning.
Car engine compartment cleaning.
Washing and finishing in plasterer work.
Food processing equipment cleaning.
Farm tool and machine cleaning
Insecticide spraying in gardens and to trees
Printing machine cleaning.
Steel pipe cleaning.
Hydro testing
|
MODEL |
DIMENSIONS (mm) | WEIGHT (Kgs) | PUMP | MOTOR | ||
|---|---|---|---|---|---|---|
| MAX.PRESSURE | FLOW RATE | RPM | ||||
| CLEANER KYC-208 | 275X200X230 | 8.6 | 90 Bar | 2.82 l/min | 1410 | 1 phase,50Hz,250W |
drum and tanker loading / unloading
high-head and in plant transfer
trash / irrigation / diesel / acid / mud / pump
underground tank emptying
sump emptying
abrasive liquid transfer
cement grouting
spillage clean-up
effluent handling
direct transfer to height / long horizontal distance
petroleum product handling
remote location
emergency stand by duty
pump for sensitive liquids , bio-gas plants , essential oils , food , milk products
pump for abrasive liquids, machine coolants, etc.
capacity:- 40 lpm,
head: 15 feet (4.5 meters)
total differential head:-30 feet (3 m)
suction lift: 15 feet (4.5 meters)
suction size:- 40 mm (1 ) id hose / 50 mm (2 ) id hose
delivery size: 40 mm (1 ) id hose / 50 mm (2 ) id hose25 mm (1) id hose for pumping to height / long distances
flexible shaftpumps are mini centrifugal pumps ofsubmerged typethey are widely used forpumpinganddraininginconstructionbuilding sites, tunnels, waterreservoir, etc, also for wastewater discharginginindustry, irrigation on farmlandand soon, they aredriven bydiesel engines andgasoline engines minitypes can also usevibrator motoras their power, they havethefeaturesthat convenient to operate, large flow quantity and high deliverylift.
flexible shaft driven pump should bewidelyused to handledirtywater from shallowpit and also useful to civil contractors andindustries tohandlewater.
supplied pump connected withflexible shaftof 5.5meters. Pumpdesign formax.head upto16 meters.
maxdischarge 1200 lpm.
pumpavailable with motor or engine. Suction size 3anddelivery size 2.5
for diesel / oil and kerosene only, pump + 4 mt delivery hose, + flow meter + manual nozzle + bracket measurement: 42 x 36 x 32.5 cm gross weight: 12.5 kg we also provide diesel tank along with pump metering system for mining and transport industries.
.
ach type pumps are used in chemical & petrochemicals industry, food industry, dyeing , sugar industry, paper & pulp industry, fertilizer units & etc. Handling of all types of liquids , acids , alkalis , dyes , hydrocarbons , corrosive slurries (solids up to 15 mm) , green , black liquor , pulp (consistency up to 2%) & etc.
back pull out centrifugal designsteady flowenergy efficientsturdy constructionlow npshnoise & maintenance freeenvironment friendlyshaft defection below 0.05 mmsimple external axial adjustment for impeller wear & tearbearing life-more than 17000 operating hours*.
| Capacity | Up to 600 M3/Hr |
| Head | Up to 180 Mtrs (590 Feet) |
|---|---|
| Temperature | Up to 200° C (392° F) |
| Casing Pressure | Up to 24 Kg / cm2 |
| Pump size ( Delivery bore) | DN 25 mm to DN 200 mm |
| Speed | Up to 2900 rpm |
| Direction of rotation | Clockwise from drive end |
range :
| |
applications :
features
|
ps type pumps are used in sugar industry. Sea water desalination plants, power stations, steel plants and absorption plants in environmental engineering & etc.
handling of all types of clear non aggressive liquids, turbid or slightly contaminated liquids , raw water , sewage water , sea water , low concentration cellulose suspension & etc.
horizontal single stage, volute casing pumps with discharge branch arranged tangentially upwards / horizontal. The pump is designed open and closed impellers.
pump models 450/550 & 250/270 the flanges are as per bs 10 table d , other models flanges are as per ansi 16.5.
pump model mf 200/320 , 200/400 , 250/320 and mf 300/320 are provided with taper roller bearings, mf 250/400 are provided with double row angular contact ball bearing on drive end and nu bearing on pump end. Pump model mf 250/270, and mf 450/500 are provided with deep groove ball bearing on pump end and single thrust ball bearing along with deep groove ball bearing on drive end. Bearings are either oil or grease lubricated.
conforming to din 24256horizontal single stageend suction , discharge branch arranged tangentially upwards / horizontalopen and closed impeller construction
| Capacity | Up to 3500 M3/Hr |
| Head | Up to 45 Mtrs (145 Feet) |
|---|---|
| Temperature | Up to 100 C (212 F) |
| Casing Pressure | Up to 16 Kg / cm2 |
| Pump size ( Delivery bore) | 200 mm to 450 mm |
| Speed | Up to 1750 rpm |
| Direction of rotation | Clockwise from drive end |
high pressure output comes from efficiency-oriented no nonsense design differential operation (one suction and two discharges per cycle)keeps the discharge fluctuations very low. Coupled construction eliminates problems normally associated with the motor drive, such as belt slipping. Design that fully utilizes rolling frictions (utility model and design registration being applied for)keeps the starting torque to minimum and provides maximum output. Simple and rugged construction permits easy disassembly cleaning. And re assembly. Compact and super lightweight structure makes it handy and portable. Newly developed universal nozzle permits almost every washing job with wase.
APPLICATIONS :
PS Type pumps are used in Sugar Industry. Sea water Desalination Plants, Power Stations, steel plants and Absorption plants in Environmental Engineering & Etc.
Handling of all types of Clear Non Aggressive Liquids, Turbid or Slightly Contaminated Liquids , Raw Water , Sewage Water , sea water , Low Concentration Cellulose Suspension & Etc.
FEATURES:-
Conforming to DIN 24256
Horizontal single stage
End suction , discharge branch arranged tangentially upwards / horizontal
Open and Closed Impeller construction
applications :
ps type pumps are used in sugar industry. Sea water desalination plants, power stations, steel plants and absorption plants in environmental engineering & etc.
handling of all types of clear non aggressive liquids, turbid or slightly contaminated liquids , raw water , sewage water , sea water , low concentration cellulose suspension & etc.
features:-
conforming to din 24256
horizontal single stage
end suction , discharge branch arranged tangentially upwards / horizontal
open and closed impeller construction
ManualHydroTestPumpsareportabletypeandcanbeeasilyhandledbyoneman.Thepumpuit mountedonfabricatedM.S.Pail, whichstoresliquidfortesting, aswellasprovideselfbasefortesting. Inthistypeofseparatefoundationisnotrequired.
ManualHydroTestPumpsareavailablewithCI/MS/GM/SSBody, MSFabricatedPailhavingwater fillingcapacity9, 12or22liters, SSPiston, CI/MSHandleSSCheckValve, BrassPressureReleaseCock , 4DialPressureGaugeand1.5meterspressureHosewithendconnections
APPLICATIONS FOR HYDRAULIC TESTING OF
features :-
specifications(as per iso 2858/din 24256):-
industries covered:-
material of construction:-
pumps are manufactured in variety of materials such as carbon steel / wcb as per astm / din standards
Flexible shaft pumps are mini centrifugal pumps of submerged type they are widely used for pumping and draining in construction building sites, tunnels, water reservoir, etc, also for wastewater discharging in industry, irrigation on farmland and so on, They are driven by Diesel Engines and Gasoline engines mini types can also use vibrator motor as their power, They have the features that convenient to operate, large flow quantity and high delivery lift.
Flexible Shaft Driven Pump should be widely used to handle Dirty water from shallow pit and also useful to Civil Contractors and Industries to handle water.
Supplied Pump Connected with Flexible Shaft of 5.5 Meters. Pump Design for Max.Head up to 16 Meters.
Max Discharge 1200 LPM.
Pump available with Motor or Engine. Suction Size 3 and Delivery Size 2.5
1) First of all connect one end of Flexible shaft with Pump portion and another end of Flexible Shaft with Motor.2) Connect flexible delivery hose with Pump portion.3) After above proper connection insert pump portion into your sump / tank / shallow pit.4) Give Single phase supply to Motor.5) Switch ON your supply and pump will be start for operation.
Pump should be handle diluted mud into water and can be handle solid particles up to 3 mm only.
MODEL : AC-120:-AC120Automaticnozzlesaremadeofalloyaluminumheavydutyhighflownozzle, forfuelingtruck, busetc thisislowcostnozzlewithlonglife, maxflowis 120LPM
MODEL : AC-150:-Longer Spout auto nozzle with high flow, bulk fuel oil delivery service, the biggest advantages is with longer spout , it is used for filling truck, big bus.
MODEL : AC-200
AC-200 Automatic Nozzles are made of alloy aluminum and designed with big flow rate, and the max flow rate is 260 lpm.
|
MODEL |
AC-120 |
AC-150 |
|
INLET THREAD |
BSPF/NPT 1” |
BSPF/NPT 1” |
|
DIAMETER OF SPOUT |
1” |
1” |
|
NET WEIGHT |
17 kg |
14 kg |
|
GROSS WEIGHT |
18 kg |
15 kg |
|
DIMENSION |
420 x 340 x 400 mm |
420 x 340 x 400 mm |
chemical nozzle
model : ac-5000 / ac-6000
for ac-5000 , ac-6000 manual plastic nozzles are made of pp , edpm and designed with todays customer in mind . inlet and outlet is and it can fill kind of chemical material. ad blue urea especially use in farm
APPLICATIONS:
PS Type pumps are used in paper & pup industry, food industry, sugar industry .efficient plants, sea water desalination plants, chemical & petrochemicals industry, power stations and absorption plants in environmental engineering & Etc.
Handling of pulp & paper stocks up to 5% consistency heavily contaminated liquids, raw sewage, chlorinated water & Etc
| SAILENT FEATURES :
|
applications:
ps type pumps are used in paper & pup industry, food industry, sugar industry .efficient plants, sea water desalination plants, chemical & petrochemicals industry, power stations and absorption plants in environmental engineering & etc.
handling of pulp & paper stocks up to 5% consistency heavily contaminated liquids, raw sewage, chlorinated water & etc
sailent features :
| APPLICATIONS: PS Type pumps are used in paper & pup industry, food industry, sugar industry .efficient plants, sea water desalination plants, chemical & petrochemicals industry, power stations and absorption plants in environmental engineering & Etc. Handling of pulp & paper stocks up to 5% consistency heavily contaminated liquids, raw sewage, chlorinated water & Etc | |
| SAILENT FEATURES :
|
magnetic drive design eliminates the conventional method of shaft coupling. Hence the pump casing is fully sealed from drive end which gives away the use of conventional sealing system . There is no seal used and hence no troublesome seal repairing and replacement , leakage and production lost. Impeller and drive magnets are permanent rare earth magnets. They prevent slippage and ensure that full motor horsepower is converted into pumping power.
all pumps are rated for continuous duty with class e insulation.all pumps are centrifugal semi-open impeller type pumps and need priming before start up.ss-316 magnetic pumps are available upto 5 hp
100% leak proof pumps due to magnetic drive arrangement. No shaft seal used which automatically solves problems of seal leakage and wear & tear. Friction free operation for reduced power consumption. High power permanent magnets ensure full power transfer and eliminates slippage. All pumping parts are non-metallic, which gives superior corrosion resistance, simple and easy to operate and maintain. Long life , reliable and trouble free operation contact us for seal less and gland less pump, we areleading sealless pump manufacturer in india.
ideal for transfer of corrosive chemicals , plating chemicals , acids , dyes , solvents , toxic & fuming liquids , petrol , kerosene etc. Useful in chemical industries , pharmaceuticals and food processing industries. Electroplating , galvanizing / anodizing plants . Laboratory equipments and pcb palnts . Medical equipments and x-ray film plants. Textile dyeing houses . Liquid dispencing machines and chemical filtration equipments. For hazardous duty conditions with flame proof motors.high efficiency due to permanent magnet power coupling, contact us for seal less and gland less pump, sealless pump manufacturer.
capacity:- from 10 lpm upto 750 lpm head :- upto 40 mtrs. material of construction :- poly propylene glass filled , pvdf upto 110 deg c & ss-316 operating temp :- pp upto 80 deg c , pvdf upto 110 deg cspecial pumps for high temperature upto 150c and 250c for ss-316
| Features : | |
|
| Applications and Operating Range: | |
| For pumping clear/turbid water/chemicals & volatile liquids.Air conditional plants, power station, mine drainage, sprinkler systems fire fighting, booster service, oils, brine. Delivery sizes up to 250mmCapacity up to 990 m3/hrHead up to 120 metersRPM 500 to 3600 |
FLOWTECH Acrylic Body Tube Variable Area Flow Meters (Rotameters) are intended for general in line metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Acrylic Body metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered Acrylic body Tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.
| Meter Size | Max. Operating Pressure (Kg/Cm2g) |
|---|---|
| 15 | 25 |
| 20 | 25 |
| 25 | 15 |
| 40 | 12 |
| 50 | 10 |
| 80 | 07 |
ROTARY TYPE HAND OPERATED BARREL PUMPS:-
MODEL:- RHB SS-1
Additional Information:
Payment Terms : T/T
