creative engineers

Maninagar, Ahmedabad, Gujarat

MODEL:- RHB PP-1

• Outer Diameter :- 40 mm,
• Body made glass filled polypropylene with PTFE vanes

Viton rubber seals & ss hardware suitable for 50 210 lit drums.

• Recommended for use with water based chemicals acids & all petroleum based fluids.
• Pipe tube length.
• Capacity 250 ml / rotation.
• Weight
• Do not use with solvents, acetone, turpentine etc
• In Built Filters

FEATURES:-

• Highly Efficient Hydraulics Design
• Fabricated Components
• Less Friction in system (Pressed Components)
• No Expensive Foundation Required
• Easy Installations
• Small Floor Space
• APPLICATIONS

• Vertical multistage centrifugal pumps type MC are designed for a wide range of applications.

  • Water supply systems.
  • Water Circulation /Water Treatment Plant
  • Hydro Pneumatic Systems / Condensate transfer.
  • Agriculture /Industrial Washing
  • Coolant Circulation.
  • Boiler Feeding / Fire Fighting / Booster Applications.
  • Ship Building / RO-DM Plants.
  • Sprinkle Irrigation.

  • RANGE:-

    • RANGE : UP TO 4 OUTLET SIZE
    • MAXIMUM HEAD 280 METER
    • MAXIMUM CAPACITY 90 M3/HR
    • SUCTION X DELIVERY SIZES :- 32 X 32 MM
    • CAN HANDLE LIQUIDS UP TO 120C

features:-

• highly efficient hydraulics design
• fabricated components
• less friction in system (pressed components)
• no expensive foundation required
• easy installations
• small floor space

• applications:-vertical multistage centrifugal pumps type mc are designed for a wide range of applications.

  • water supply systems.
  • water circulation /water treatment plant
  • hydro pneumatic systems / condensate transfer.
  • agriculture /industrial washing
  • coolant circulation.
  • boiler feeding / fire fighting / booster applications.
  • ship building / ro-dm plants.
  • sprinkle irrigation.

  • range:-

    • range : up to 4 outlet size
    • maximum head 280 meter
    • maximum capacity 90 m3/hr
    • suction x delivery sizes :- 32 x 32 mm
    • can handle liquids up to 120c

features:-

• highly efficient hydraulics design
• fabricated components
• less friction in system (pressed components)
• no expensive foundation required
• easy installations
• small floor space

applications:-vertical multistage centrifugal pumps type mc are designed for a wide range of applications.

• water supply systems.
• water circulation /water treatment plant
• hydro pneumatic systems / condensate transfer.
• agriculture /industrial washing
• coolant circulation.
• boiler feeding / fire fighting / booster applications.
• ship building / ro-dm plants.
• sprinkle irrigation.

range:-

• range : up to 4 outlet size
• maximum head 280 meter
• maximum capacity 90 m3/hr
• suction x delivery sizes :- 32 x 32 mm
• can handle liquids up to 120c

excellent quick automatic priming action without foot valve up to 8 mtrs.automatic air release during priming.back pull design, so easy maintained without disturbing pipe lines.dynamically balanced rotating parts ensure less vibrations.better efficiency because of good hydraulic design.non-clog impellers to handle solid particles up to 16 mm.minimum parts, fast repairing at low cost, also pump is available at economical rate.available in bare, coupled, monobloc, belt driven & engine driven version.also offered pump with trolley / trailer to move it from one place to another.graded casting & perfect machining of all components ensure long life.able to offer pumps with closed impellers for clear liquids.monobloc pumps can be able to with stand with wide voltage fluctuations.less expensive & easily available spares.

MODEL:- RHB CI-1

• Outer Diameter :- 40 mm,
• Solid cast Iron Construction,
• 2 way operation,
• 1 / 1 pump Inlet,
• Suitable 50-210 Liter,
• Useful for transferring oil , diesel , kerosene & other Non-Corrosive Media.
• Pipe Tube Length 990 mm
• Capacity 5 liter / 20 turns,
• Weight
• In Built Filter

domestic monoblock pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as.uni-casing no air lock problem.balanced and rigged construction.no centrifugal switch.less operational and maintenance cost.

at home or small farm house for drinking water and other applications

cast iron casing with brass impeller and with standard carbon-ceramic mechanical sealmotor will be tefc type and available in single and three phase with wide voltage fluctuation.

more than 3mm corrosion allowance (cast iron) for extended use on corrosive applications. Back pull out construction allows rotating assembly to be withdrawn without disturbing the suction and delivery connections. One piece self vented foot mounted , center suction volute casing , single stage , closed / semi open dynamically balanced impeller.

flange drilling standards as per din 24255 / iso 2858 or as per customers requirement.

designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.

special monoblock versions available on request.

heavy duty, deep- grooved bearings with minimum 50, 000 hours operating life under normal condition. (grease lubricated , oil lubrication available on request)

with exproof protection.(cmri certificate is not available) pump with by pass and self priming. Thermal overloads protection. Filter and connectors

sewage and effluent treatment plants. Low npsh process circulation duty. Aboard ships as bilge, deck wash pump & engine cooling pump. Loading , unloading and transfer of tricky liquids viz. Oils , solvents , gas oils , minerals , oils , grease, petrol, seawater etc.

capacity :- up to 350 m3/hr,

head :- up to 60m

suction head: up to 8 meters.

material :- cast iron & bronze,

solids: up to 41 mm dia.

viscocity: up to 100mm/sec.

perfect sealing assured by high quality mechanical seal which cannot run dry because of internal oil reservoir.

graded casting & ss shaft, increase service life.

bearings greased for life, save external lubrication. Minimum need for inspection and maintenance.

drive options, of lectric motor, coupled or monoblock and belt drive versions or by petrol/diesel engine.

perfect selfpriming action with maximum suction head of 8 meters.

impellers with wider flow passage avoid clogging and can handle solids up to 41 mm dia.

back pullout design , simplifies inspection and maintenance.

compact , light weight & yet rugged construction.

• Creative engineers now introduce self priming cum centrifugal pump with closed and semi open impeller .
• We have made ss-304 or ss-316 chamber in round shape or in square shape .
• These chambers are interconnected with casings , casings have flap type or disc type non return valve (NRV) depend upon application . we use flap type NRVwhen liquid is dirty or containing some solid particles . We use disc type check valve when liquid is crystal clear.
• These NRVs hold liquid in the chamber and centrifugal pump work as self priming pump.
• All wetted parts are made from ss-304 or ss-316 sheet only and chambers are tested with hydraulic test up to 10 bar . If pressure is more , then we test at 1.5 times then shutoff pressure

Thickness of sheet depend upon size and pressure of system .

• These pumps are ideal for all application where people do not want to use footvalve and have suction problem .

the aodd pump is double pumps in one. Chambers a & b are alternatively filled and emptied by drawing liquid in through a common inlet and out through a common outlet (d). The diaphragms in each chamber are connected by a common shaft so that they move., backwards together. Compressed dry air is directed by the air valve (e) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flow-rate can be infinitely controlled by increasing or decreasing or decreasing air pressure and or volume.

a full list of chemicals and recommended elastomers is available on request. Or our sales office advice on the best pump & materials for specific media, we are #1 supplier / manufacturer of air operated double diaphragm pump in india. Contact air-operated double diaphragm (aodd) pump manufacturer, air operated double diaphragm pump supplier in india.

typical range of products you can pump.

abrasives: clay slip, titanium dioxide, frit, mill scale.

alcohols acids: all mineral and organic acids.

cement: cement, mortar.

cosmetics: creams, emulsions, detergents.

causticsceramics: slip glazes, clay.

drilling: mud, grout, lubricants.

drinks: soft drinks, spirits, beer, wine, milk.

explosives: suspensions of gun powder explosive, etc.

inks & dyes: printing inks, driers, dyes, sixes and solvents.

foods :- liquid amd semi-solid foods, flavourings.

oils :- petrol , diesel , hydraulic and cutting oils , lube oils , animal and vegetables oils and greases.

pulps :- paper , wood sizes bleaches

resins :- natural and synthetics , water and solvent based, monomeric and polymeric plastics.

sludge & waste :- sewage , effluents , coal and lime slurry.

solvents :- aromatic and allphatics , ketones , aldehydes, esters and chlorinated hydrocarbons , de-icing fluids.

water :- all types.

timber preservatives: creosote, turpentine, copper, napthenate.

paint :- emulsions , latexes , pigments , solvent , resins , thinners,

pharmaceuticals :- liquids , creams and compounds.

plating :- aggressive acids , salts , sludge and effluents.

rubber :- natural and synthetic.

the blue arrows show the pump cycle. Fluid is being drawn into inlet ( c) by the suction stroke of the diaphragm in chamber b, which opens the ball valve (1) to allow liquid to enter the chamber , ball valve (3) is closed by the diaphragm suction.in chamber (a) air has been applied to the rear of the diaphragm to force out the liquid in the chamber through the ball valve (4) to the liquid outlet (d). This discharge stroke closes ball valve (2) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous flow o outlet d.

standard aodd pumps are one : one ratio-maximum outlet pressure never exceed air supply pressure.

creative engineers now introduce self priming cum centrifugal pump with closed and semi open impeller.

we have made ss-304 or ss-316 chamber in round shape or in square shape .

these chambers are interconnected with casings , casings have flap type or disc type non return valve (nrv) depend upon application . We use flap type nrv when liquid is dirty or containing some solid particles . We use disc type check valve when liquid is crystal clear.

vertically split suction, intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets

grease lubricated antifriction bearings designed to meet the requirements mounted on one or both side.

pump uses soft graphite lubricated asbestos. Special design of stuffing boxes with mechanical seals are available

the suction and discharge nozzles are top vertical.

the flanges are oval flange orround flange as required by the design

the round flanges when provided correspond to international standards

the direction of rotation is clockwise as viewed from the driving end

for suction more then 4 mlc the capacity reduces pump must be filled with liquid before they are started for the first time

suction/delivery casings & stage casings closed grain cast iron impellers : bronze shaft and keys : stainless steel 410

clamping studs : en-8 special material available on request all bronze, carbon steel, s.s., alloy steel

vertically split suction, intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets

grease lubricated antifriction bearings designed to meet the requirements mounted on one or both side.

pump uses soft graphite lubricated asbestos. Special design of stuffing boxes with mechanical seals are available

the suction and discharge nozzles are top vertical.

the flanges are oval flange orround flange as required by the design

the round flanges when provided correspond to international standards

the direction of rotation is clockwise as viewed from the driving end

for suction more then 4 mlc the capacity reduces pump must be filled with liquid before they are started for the first time

suction/delivery casings & stage casings closed grain cast iron impellers : bronze shaft and keys : stainless steel 410

clamping studs : en-8 special material available on request all bronze, carbon steel, s.s., alloy steel

material of construction :-

standard cast iron construction,

dc motor specifications:-

12 volt dc pmdc motor suitable for above pump, take approximately 3 ampere current.

scope of supply:-

dc lpg pump with suction and delivery pipes with valve, regulator and extra diaphragm

.

Applications and Industries:

Irrigation Sprinkler Installations

Pressure Boosting Multistage story Building Hydro Pneumatic

Water Works Fire Fighting Mining wash down Applications

Hydraulic press / Circuits transfer & circulation hot & cold water

Boiler feed pumps Condensate pumps

Features:

• Vertically split suction. intermediate and discharge casings clamped together by external tie bolt and sealed with gaskets or 'O' ring as required by the design, pumping temperature of the liquidpumped and the construction of the pump
• Grease lubricated Antifriction Bearings designed to meet the requirements mounted on either side
• Pump uses soft graphite lubricated asbestos. The shaft is fitted with renewable shaft sleeve in the region of the stuffing box, which protects the shaft from wear due to packing. Specialwater-jacketed stuffing boxes, and special design of stuffing boxes with mechanical seals are available
• The discharge nozzle is top vertical. Suction nozzle horizontal located on the right hand side, left hand side or central position when viewed from the driving end Is available. The flanges are round corresponding to international standards
• The direction of rotation is clockwise as viewed from the driving end

Back Pullout Pumps "BPO"

• about magnetic pump:-

magnetic drive design eliminates the conventional method of shaft coupling. Hence the pump casing is fully sealed from drive end which gives away the use of conventional sealing system . There is no seal used and hence no troublesome seal repairing and replacement , leakage and production lost. Impeller and drive magnets are permanent rare earth magnets. They prevent slippage and ensure that full motor horsepower is converted into pumping power.

• all pumps are rated for continuous duty with class e insulation.
• all pumps are centrifugal semi-open impeller type pumps and need priming before start up.
• ss-316 magnetic pumps are available upto 5 hp

• advantageous features

100% leak proof pumps due to magnetic drive arrangement. No shaft seal used which automatically solves problems of seal leakage and wear & tear. Friction free operation for reduced power consumption. High power permanent magnets ensure full power transfer and eliminates slippage. All pumping parts are non-metallic, which gives superior corrosion resistance, simple and easy to operate and maintain. Long life , reliable and trouble free operation.

• applications & user industries

ideal for transfer of corrosive chemicals , plating chemicals , acids , dyes , solvents , toxic & fuming liquids , petrol , kerosene etc. Useful in chemical industries , pharmaceuticals and food processing industries. Electroplating , galvanizing / anodizing plants . Laboratory equipments and pcb palnts . Medical equipments and x-ray film plants. Textile dyeing houses . Liquid dispencing machines and chemical filtration equipments. For hazardous duty conditions with flame proof motors.high efficiency due to permanent magnet power coupling.

• range
• capacity:- from 10 lpm upto 750 lpm
• head :- upto 40 mtrs.
• material of construction :- poly propylene glass filled , pvdf upto 110 deg c & ss-316
• operating temp :- pp upto 80 deg c , pvdf upto 110 deg c

special pumps for high temperature upto 150c and 250c for ss-316

• about magnetic pump:-

magnetic drive design eliminates the conventional method of shaft coupling. Hence the pump casing is fully sealed from drive end which gives away the use of conventional sealing system . There is no seal used and hence no troublesome seal repairing and replacement , leakage and production lost. Impeller and drive magnets are permanent rare earth magnets. They prevent slippage and ensure that full motor horsepower is converted into pumping power.

• all pumps are rated for continuous duty with class e insulation.
• all pumps are centrifugal semi-open impeller type pumps and need priming before start up.
• ss-316 magnetic pumps are available upto 5 hp

• advantageous features

100% leak proof pumps due to magnetic drive arrangement. No shaft seal used which automatically solves problems of seal leakage and wear & tear. Friction free operation for reduced power consumption. High power permanent magnets ensure full power transfer and eliminates slippage. All pumping parts are non-metallic, which gives superior corrosion resistance, simple and easy to operate and maintain. Long life , reliable and trouble free operation.

• applications & user industries

ideal for transfer of corrosive chemicals , plating chemicals , acids , dyes , solvents , toxic & fuming liquids , petrol , kerosene etc. Useful in chemical industries , pharmaceuticals and food processing industries. Electroplating , galvanizing / anodizing plants . Laboratory equipments and pcb palnts . Medical equipments and x-ray film plants. Textile dyeing houses . Liquid dispencing machines and chemical filtration equipments. For hazardous duty conditions with flame proof motors.high efficiency due to permanent magnet power coupling.

• range
• capacity:- from 10 lpm upto 750 lpm
• head :- upto 40 mtrs.
• material of construction :- poly propylene glass filled , pvdf upto 110 deg c & ss-316
• operating temp :- pp upto 80 deg c , pvdf upto 110 deg c

special pumps for high temperature upto 150c and 250c for ss-316

features :

• All Wetted Parts Of Pumps Are Made From Lost Wax Process (investment Casting), So Execellent Surface Finish, Smooth Flow Path/ Hydraulic Passage And No Casting Defects Like Blow Holes, Cracks Etc
• Centripetal / Regenerative Impeller For Better Suction
• Pumps Will Be Normally Available In CF-8m (Gun metal, Alloy-20) And Also In Other Material As Per Customer's Requirements.
• Single / multistage Pumps To Handle Crystal Clear Liquids For High Pressure Duties.
• Very Quick Priming, No Need Of Foot Valves
• Very High Suction Capacity Up to 8 Meters Without Much Noise.
• Various Types Of Sealing Arrangements As Per Customer's Liquid Characteristics. Normally Fitted With Carbon/ceramic Seal Faces With PTFE Cup And Viton Rubber.
• Pumps Are Available In Monobloc And In Bare Type, Also With Flameproof Motor. All Motors Are Of "TEFC" Type
• Pump Can Be Offered With Electropolishing For Some Special Requirements.
• Able To Handle Temperature Up To 80 C.
• Trolley mounted available.
• Also available with 120 Volt / 60 Hz.
• Custom built pumps available.

we offer self priming pump which are ideal for use in different household, commercial and agricultural applications, our pms series self priming pumps are specifically designed for low power consumption and to allow the pump to re-prime itself typically under lift conditions. These pumps eliminate the need for foot valves, vacuum and ejector pumps, which get clogged during prolonged or remote operation.

we offer precision engineered self priming pumps, which are used for all crystal clear liquids without solids in different household, commercial and agricultural applications. These pumps are specially designed for low power consumption and they can be re-primed typically under lift conditions. These pumps are made from premium grade material and are able to handle high pressure conditions. We also have the facility to customize these pumps as per clients requirements.

FEATURES:-

• All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc.
• Centripetal / regenerative impeller for better suction.
• Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer's requirements.
• Single /multistage pumps to handle crystal cleat liquids for high pressure duties.
• Very quick priming, no need of foot valves.
• Very high suction capacity up to 8 meters without much noise
• Various types of sealing arrangements as per customer's liquid characteristics.
• Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber,
• Pumps are available in monobloc and in bare type also with flameproof motor.
• All motors are of "TCFC" type
• Pump can be offered with electro polishing for some special Requirements.
  
• Able to handle temperature up to 80 C
• Trolley mounted available.
• Also available with 120 Volt / 60 Hz.

Custom built pumps available

FEATURES:-

• All wetted parts of pumps are made from lost wax process (investment casting), so excellent surface finish. smooth flow path/ hydraulic passage and no casting defects like blow holes, cracks etc.
• Centripetal / regenerative impeller for better suction.
• Pumps will be normally available in CF-8m /CF-8 (Gun metal, Alloy-20) and also in other material as fee customer's requirements.
• Single /multistage pumps to handle crystal cleat liquids for high pressure duties.
• Very quick priming, no need of foot valves.
• Very high suction capacity up to 8 meters without much noise
• Various types of sealing arrangements as per customer's liquid characteristics.
• Normally fitted with carbon/ceramic seal faces with teflon cup and viton rubber,
• Pumps are available in monobloc and in bare type also with flameproof motor.
• All motors are of "TCFC" type
• Pump can be offered with electro polishing for some special Requirements.
  
• Able to handle temperature up to 80 C
• Trolley mounted available.
• Also available with 120 Volt / 60 Hz.

Custom built pumps available

Chambers A & B are alternatively filled and emptied by drawing liquid in through a common inlet and out through a common outlet (D). The Diaphragms in each chamber are connected by a common shaft so that they move., backwards together. Compressed dry air is directed by the air valve (E) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flow-rate can be infinitely controlled by increasing or decreasing or decreasing air pressure and or volume.

Stainless Steel Centrifugal Pumps "CFS"

For Dairy & Pharmaceutical (Sanitary Design) Industries

Applications :

a fire pump is a part of afire sprinklersystem's water supply and can be powered by electric, diesel or steam. The pump intake is either connected to the public underground water supply piping, or a static water source (e.g., tank, reservoir, lake). The pump provides water flow at a higher pressure to the sprinkler systemrisersand hose standpipes. A fire pump is tested andlistedfor its use specifically for fire service (by a third-party testing and listing agency if required)

operation:-

fire pumps may be powered either by anelectric motoror adiesel engine, or, occasionally asteam turbine. If the local building code requires power independent of the local electric power grid, a pump using an electric motor may utilize, when connected via a listedtransfer switch, the installation of anemergency generator.

the fire pump starts when the pressure in the fire sprinkler system drops below a threshold. The sprinkler system pressure drops significantly when one or morefire sprinklersare exposed to heat above their design temperature, and opens, releasing water. Alternately, otherfire hosesreels or other firefighting connections are opened, causing a pressure drop in the fire fighting main.

fire pumps are needed when the local municipal water system cannot provide sufficient pressure to meet the hydraulic design requirements of the fire sprinkler system. This usually occurs if the building is very tall, such as inhigh-risebuildings, or in systems that require a relatively high terminal pressure at the fire sprinkler in order to provide a large volume of water, such as in storage warehouses. Fire pumps are also needed if fire protection water supply is provided from a ground level water storage tank.

types of pumps used for fire service include: horizontal split case, vertical split case, vertical inline, vertical turbine, and end suction.

These High pressure piston pumps are able to provide high pressure and diffuse water for pumping water in domestic and commercial applications.

First of all mount the sprayer pump on the stand.Fit the sprayer pump with appropriate Motor & V-BeltFill the pump with SAE-90 Oil upto the indicated level before starting the pump, NEVER RUN THE PUMP WITHOUT OIL.Fit the vessel on the top of the outlet chamber of the pump.For 1, 2 & 1 & 1II H fit nipple & Tee on the outlet chamber where the sticker OUT is indicated, Fit the pressure pipe with hose nipple and spray gun at either ends and connect the same with one and tee. On the other end of Tee connect Overflow Valve and Nipple. All the Fittings should be air tight and as per the drawing.For 3, 2H & 3H Connect the vessel on one side of the top of Outlon the other , Connect the overflow valve (Control valve) with nipple. On the outlet chamber where OUT is indicated, connect the pressure pipe with hose nipple. Fit the spray gun on the rear end of the pressure.Connect the incoming Hose pipe at the IN indicated sticker Air Tight and then fit the foot valve at the ear end of the hose.Clean the Nozzle (Spray-gun) every hour with clean water only.Open the Overflow Valve Fully while Starting and Turning Off. Adjust the Overflow valve according to the required pressure.Always check the grease in grease cup and the oil level in the chamber before starting the pump.If the pump fails to take in water, check the foot valve and the inlet fitting (which should be AIR TIGHT).If water starts leaking Nar the piston, slightly tighten the gland nut be opening the class.If the pump fails to deliver adequate pressure, open the two long bolts and the open the inlet and Outlet chambers, Clean the NRYs which are inside the valve chamber. After cleaning properly, Fit all the parts correctly again.Keep the tension of the V-Belt under check.Periodical checkups of the Nuts & Bolts is advisable.The Fitting of the sprayer pumps should be exactly as per drawing, If still there is any problem feel free to contact our nearest Dealer.

These pumps are manufactured from best quality stainless steel and cutting-edge technology. Offered pumps are appreciated for their noise and vibration free performance, easy installation and high degree interchangeability. Our pumps are suitable for both organic and inorganic fluids and used in oil refineries, paper, food, chemical, textile industries and sea water desalination plants. These pumps are equipped with water self cooling feature that makes them suitable for the applications in heat transfer plants and handling of organic heat transferring of oils.

Barrel pump is useful for safe and efficient handling of highly corrosive chemicals, solvents, acids, petroleum products diesel oil , and fuel oils , plating solution , toxic chemicals etc. It Eliminates danger of spillage explosion hazards. The pump can be directly inserted in to the barrel threading provide on the pump adopter. It sucks the liquid from the bottom and hence less chances of leftover material.

features:-

excellent quick automatic priming action without foot valve up to 8 mtrs.

automatic air release during priming.

back pull design, so easy maintained without disturbing pipe lines.

dynamically balanced rotating parts ensure less vibrations.

better efficiency because of good hydraulic design.

non-clog impellers to handle solid particles up to 16 mm.

minimum parts, fast repairing at low cost, also pump is available at economical rate.

minimum parts, fast repairing at low cost, also pump is available at economical rate.

available in bare, coupled, monobloc, belt driven & engine driven version.

also offered pump with trolley / trailer to move it from one place to another.

graded casting & perfect machining of all components ensure long life.

less expensive & easily available spares.

pumps can be fitted with mechanical seal as per customer's requirement

application:-

• public utilities:for pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• dewatering basements, trenches, construction sites.
• onboard shift, as bilge, for desk wash & engine cooling.
• industrial :petroleum product, ceramic product chemicals, thermal plants etc.
• tiles & marble factories, effluent plants.
• marine works:handling liquids from docs, ports and vessels etc.
• salvage operations :fire fighting.
• mobile machinery :cooing water for marine engines & shovels.
• any application where priming is to be avoided.

l monobloc pumps can be able to with stand with wide voltage fluctuations.

• less expensive & easily available spares.
• pumps can be fitted with mechanical seal as per customer's requirement

APPLICATIONS:-

• Feed Pumps for R.O. System,
• Pressure Boosting Systems,
• Pressure Jet-Cleaning,
• Water Distribution,
• Refrigerant Recycling ,
• Very Light and Non Aggressive Chemicals Transfer.
• Drip Irrigation System.

CONNECTION AND WORKING RANGE :-

• Connections:- 1 BSP Female Thread,
• Working Pressure kg/cm2 :- 1 to 7,
• Temp Range c :- -15 to 75,
• Maximum Ambient Temperature :- 50c

these special type of pumps have been designed to float in rivers and lakes and sump where level of liquid changing constantly and sometimes liquid required positive suction or low suction. Following are the special features of the pumps.

• takes both axial and radial loads, specially designed to take thrust loads due to high currents in rivers.
• the centre of gravity is maintained in such a way that the pump will always be in position and even if some heavy logs/animals / external forces in the river try to change its position the pump tends to come to its original floating position when the external lateral force is removed.
• very easy to maintain: lots of power/energy savings as compared to high suction pumps.
• pump and floating platform can be made from m.s, pp or ss as per requirement.
• by reason that the floating pump can run in the water , such pumps are helpful for simplifying the earth work and building engineering of pumping station , reducing installation area and saving 3040% of the total project cost.
• can solve the flood resistance problem of those rivers and lakes with large fluctuation of water levels.
• can be supplied up to 200 meter head and 1000 m3/hr
• floating pumps avoid the need for any civil construction on the river banks.
• floating pumps are not affected by the fluctuations of the water (tide) levels. Since the pump is always floating, it ensures that the impeller remains submerged. when pump is under water or very low suction head due to floating platform in surface pump.
• since these pumps are floating , the issue of depth of suction is ruled out.
• very useful when suction lift is very high.
• very useful for slurry , hot water and for mining application.

always made as per customers requirement and we use different type of pump and platform as per characteristics of liquid .

Applications and Industries:

1. Water supply
2. Building Services

3 . Circulating Water Systems 4. Paper Mills

5. Water / Effluent Treatment

6. Pharmaceuticals

7. Irrigation 8. Sugar Mills

9. Ports and Docks 10. Vegetable Oil Mills

11. Air Conditioning 12. General Industry Requirements

13. Fire fighting

Options and Features:

• Horizontal and vertical Execution and Centre Line Suspension
• Gland Pack / Mechanical Seals
• 3 stage HSC Pump with Head up to 170 mtrs and flow up to 350 m3/hr for Condensed Extraction.
• Bush Bearing arrangement
• Bearing Cooling arrangement
• High head pumps have Double Volute Casing
• Two stage pump-single entry closed type with Impellers Back to Back

Metallurgy:-

• Cast Iron / Bronze Combination
• CF-8M / CA6 NM Combination
• Ductile Steel and other special Metallurgles

Sanitary Pumps

Stainless Steel Centrifugal Pumps "CFS"

For Dairy & Pharmaceutical (Sanitary Design) Industries

Applications :

Features:

• Available in very wide range
• HighAvailability in any type of material like CI, SS-316, SS-304, Bronze , Alloy-20 Etc.
• Balanced Shaft & Rotor with excellent grade stamping & wire so highly efficient motor
• Totally Noiseless Operation.
• Available in any length and for any Liquid.
• Extruded powder coated motor body (up to 1 hp)
• No shaft seal (100% Maintenance free.)
• Semi Open Impellers (Ensure free passage of solids and chips)
• Large stock, Earliest Delivery.

• COOLANTPUMPS RANGE:

  • Maxdischargeup to1000 LPM.
  • Maxpressure up to21 bar.
  • Maxlengthup to1500 mm.
  • MaxHP up to20HP.
  • Maxoutlet sizeupto 4.
  • Maxtemp upto240C.
  • MaxSize of chipsupto 15mm.
  • Materialor construction CI / SS Ally20 / PP/bronzeetc.

Features:

• • Available in very wide range
  • HighAvailability in any type of material like CI, SS-316, SS-304, Bronze , Alloy-20 Etc.
  • Balanced Shaft & Rotor with excellent grade stamping & wire so highly efficient motor
  • Totally Noiseless Operation.
  • Available in any length and for any Liquid.
  • Extruded powder coated motor body (up to 1 hp)
  • No shaft seal (100% Maintenance free.)
  • Semi Open Impellers (Ensure free passage of solids and chips)
  • Large stock, Earliest Delivery.

phulsons range of immiscible pumps has been designed especially for filtering systems in the machine tool industry. The low-pressure pumps are available in different flow variants and come with a choice of bottom suction or suction from the top of the volute.

the compact coolant pumps efficiently transport liquid containing chips, fibers and abrasive particles on to the filtering unit. Semi open impellers allow the passing of chips up to 10 mm, making the pumps ideal for removing liquid from any machining process- from boring and milling to grinding.

carefully chosen materials ensure trouble free operation and long life the top of the pump is made of cast iron, while the impeller is available in composite bronze/aluminum/engineering plastic etc are used in pumps with flow up to 1000 l/min. In the bigger pumps with higher flow the impellers are made of bronze to ensure perfect resistance to e.g metal chips. As the pumped liquid will always contain oil there no risk of corrosion.

easy installation is another of the benefits of the pumps. The tank mounting flange dimensions have been carefully designed to ensure that even replacement of compacting products can be carried out without any inconvenience no special tools are required to the installation of the coolant pumps just as the entire range is easily serviced and cleaned.

in addition to the range for filtering systems, we offers a wide range of pumps for the cooling and cleaning of tools inside the machine. This allows our customers the benefit of convenient and time saving one stop shopping.