Crown Electric Company Ahmedabad, Gujarat

• ConformanceIS 325
• DimensionIS 1231 and 2223
• Colling & VentilationIS 6362
• Degree of ProtectionIS 4691. IP-54/IP-55 (Optional)
• NoiseIS 12065
• Voltage415 V +- 6%
• Frequency50 Hz +- 3%
• DutyS1 , S2 ,.. Upto S8
• Class of InsulationB,F, class avail of request
• EncloseT.E.F.C.
• Ambient Temp.: 40°C

Ac Motors are suitable for a variety of industrial, domestic & other general purpose applications. Range : 0.125 HP to 120 HP Frame Size : 56 to 280 in 2, 4, 6, 8, 10, 12 pole design

WORM GEAR REDUCTION UNITS : Reduction gear unit are manufactured in different sizes in adopter types as well as solid foot mounting type to transmit minimum 0.05 HP. With selection of correct sizes. Normally available in reduction ratio of 5 :1 to 70 : 1.   WORM : The worm is Solid with shaft made of high grade alloy steel so as to give hard wear resisting surface duly case hardened & super finished. The Bearing & Oil Seal generals are accurately, cylindrically Ground to give smooth running.   WORM WHEEL : It is made of centrifugally cast phosphor Bronze rim shrunk and keyed on cast iron center block on bigger unit and solid casting for smaller units. The teeth are hobbed on gear hobbing machine.   GEAR HOUSING : It is made of close grain graded cast iron. Large cooling fins on both sides and adequate cooling area improves efficiency.   BEARING : The ball or roller bearings are used in worm wheel with ample capacity so that is can take journal and thrust loads.   OIL SEAL : Best quality of oil seal are used (fenner)   SPECIFICATIONS : Wherever they can be applied in material and construction, they are made almost to I.S.S. 3734 – 1966 for worm gearing or DIN or Latest ISI standard.   GUARANTEE : Every “CROWN” worm reduction gear units is guaranteed for “ONE YEAR” against manufacturing defects. If any gear is becoming defective within guarantee period the same will be replaced free of charge provided it is sent to our works on site carriage paid. Any defect caused by accident on transit or miscue is not covered by guarantee.

• Range 0.25 HP to 30 HP
• RPM 300 to 3000
• Voltage 12V, 24V, 110V,    220V, 440V
• Iec Frame Sizes 80 mm to 225 mm
• Conformance IS - 4722
• Ambient Temp. 45 C

crown dc motors are applicable most wherever variable speed control drives are used. The speed control of dc motors by armature control or field control at constants torque & for constant continuous operation. due to incorporation with latest technology which ensures safe & trouble-free operations under critical conditions. the v-weld impart heavy strength to the yoke. armature laminations are of high quality electricalgradesteel. commutator: made from silver-copper-alloy. Electrolytic copper segments insulated from one another with mica. Riser connections are the tig welded. armature windings are impregnated with synthetic resin and properly baked at designed temp. To give complete protectionagainst damage from moisture, acids and alklies. main poles are made from thick laminations (g.i.sheet). high - electro - graphite carbon brushes used. ventilation: our motor equipped with screen protected drip proof (spdp) & totally enclosed (te). External force cooling is provided with blower mounted motor.

We are manufacturers, suppliers and exporters of Geared Motors. “CROWN” Geared Motors are manufactured with output ranging from 0 -12 H. P. To 30 H. P. and speed ranging from 0.1 RPM. To 450 RPM . The complete series consist of Seven sizes of gear unit in two stage helical & Seven size of gear unit in three stage helical Each size with three or four motor frames & also (worm) right angle geared motors unit in Eight size with two or three motor frames & RPM. A basic feature of ‘CROWN’ unit is therefore the accuracy in the manufacture together with top quality materials. Gears are case hardened and hardened before profile finishing, hardened and tempered 38 NICM04 steel output shafts, gray cast iron to graded casting are used. Worm gear units with 16 CrNi4 case hardened and hardened steel worm shaft and bronze wheel are assembled on isles to ensure constant quality level. Helical and worm groups made with exclusive manufacturing systems, offer characteristics of sturdiness, quietness and compactness, are also suitable for universal assembly position. Taper roller & angular bearing are used in the gearbox for longer life & caring overhung load with higher torque. ‘CROWN’ Helical Gear Box and electric motors are built as one unit to give co-axial, compact and sturdy construction for slow speed and high torque application. ‘CROWN’ ” Geared Motors and reducer are available with single, double & triple reduction design, for extremely low output speed, two gear boxes are available in all type of construction like Foot mounted, Flange mounted and Hub type construction

• H.P.CAPACITY0.18 H.P.

We are manufacturers, suppliers and exporters of Geared Motors. “CROWN” Geared Motors are manufactured with output ranging from 0 -12 H. P. To 30 H. P. and speed ranging from 0.1 RPM. To 450 RPM. The complete series consist of Seven sizes of gear unit in two stage helical & Seven size of gear unit in three stage helical Each size with three or four motor frames & also (worm) right angle geared motors unit in Eight size with two or three motor frames & RPM.