Our Products
plc controlled with hmi.
pid temperature controller to maintain the correct temperature of the heating elements
power supply: 230 vac, 50 hz, single phase @ 1.5 amp.
pneumatically operated machine.
air supply: dry & clean air @ 6 bar pressure.
air consumption: 3 to 5 cfm
consumables: heaters, heating elements,
sturdy ms frame with powder coating.
pneumatic / hydraulic cylinder for heating element movement
productivity: 2 to 4 pieces per minute.
copper tube nozzles with chilled air for cooling of the heat staked points.
plc controlled with hmi.
safety curtain for operator safety.
Heat insertion is the process which finds applications in joining plastic parts. Thermoplastic parts as such are too soft to sufficiently hold threads and offer tight joints. To overcome this problem threaded inserts of brass or steel are added post molding. Used for assembly of metal parts with plastic parts permanent |
CRYSTAL ELECTRODYNAMIX PVT LTD Specialize for in Application Of 1. Foot Board - Bolt inserts 2. Intake manifolds - Nut Inserts 3. Washer Tanks - Bushes 4. Radiator Tank - Bushes |
For heat insertion the brass or steel part to be inserted is preheated to temperature specific to the part and then pressed in the hole on the plastic part, which results in melting of plastic in the narrow zone, which flows in the knurls provided on the insert. The plastic is re-solidified by cooling, completing the assembly which results in much better mechanical properties. |
Specifications for ultrasonic plastic welding machine General Features: This machine is suitable for co-extruded plastic tubes & for Lami tubes. Can seal a tube with 50 mm diameter. Uniform & leak proof welding joint. High Efficiency Ultrasonic Sonicator. Semi automatic operation. Inbuilt trimming attachment. Rigid frame construction Pneumatic speed regulator for sealing head & trimming head. Manual tuning with reading of "idling" & "welding power" on the instrument. Ultrasonic test Automatic controller Triple time for delay time, welding time & holding time. Welding pressure adjustable up to 6 bar Microprocessor based controller. Weld time, Hold time settable in the steps of 100 milliseconds. Digital counter up to 100, 000 countsresettable. Digital Bar graph to indicate tuning & energy during the welding cycle. Leveling screws provided on the ultrasonic assembly for easy settings & alignment of horn & anvil. |
Specifications of 1.2 Kw/20 KHz. Ultrasonic Tube Sealing Machine: Electrical Input: Voltage: 230 +/- 5 V AC single Phase. Current: 8 Amps. Max. Power: 1.5 Kw. |
Output: 1. Frequency: 20 kHz. 2. Power: 1 200 watts. Operating Frequency: 20 KHz. Generator Dimensions: 580*430*150 Feather Touch screen for parameter settings on the front panel. Two line LCD display for parameter reading & setting. Generator weight: 17 kg. Co-axial Cable length: 3 meters. Sealing & trimming Head Mounted in Housing made up of 10 mm MS plates with Powder coating/plating Rigid MS columns for support Two pneumatic cylinders which operate sequentially. Movable Sealing Horn & anvil |
Machine Operation and Productivity: 1. Auto cycle with Pneumatic System. 2. Productivity : 12 to 15 Pcs per Minute. |
Ultrasonic Processor probe Sonicator is a tool specially design for Pharmaceutical chemical labs various research Institute colleges and Universities.
| ||||||
Ultrasonic generator use to produce High Electrical Energy Operating at a frequency of 20 KHZ and Ultrasonic Power 150 watts | ||||||
Features:
|
Formulation | Tissue Homogenizers. | Stimulate Bacterial | Homogenizer Processor |
Pharma | Dissolve Powders | Deaglomerate | Ultrasonic Homogenizer |
R & D Lab | Probe Sonicator | Activity | Emulsify Cosmetics |
Sonication Cell | Emulsify Liposomes | Ultra Sonicator | Extract DNA / RNA |
De-gas Liquids | Sonication of Bacteria | Disperse Solids | Prepare Emulsions |
Reactions | Sonication Cell Lysis | Extract Proteins | Accelerate Chemical |
Reactions | Accelerate Enzymatic | Dissolve Tablets | Immiscible Liquids |