Other Products / Services #5477359

Tester provided with a gauge connector of BSP of complete with one set of weights in a storage box. One dust cover, spanner & one set of spare seals.

Wind Tunnels are designed to perform the different types of experiments in Fluid Dynamics, Aerodynamics, model studies & for industrial Design Aspects. The present Wind Tunnel is configured in five parts mainly, inlet or Honeycomb section with graded screens at different intervals, jet or convergent section, Main Test Section Unit, Diffuser or Divergent Cone, Fan with Motor. The Tunnel is open Circuit type having a square test section of 300 x 300 mm. It has a contractiaon ratio of 9 & honeycomb & screens at inlet. The maximum speed in this section with a 7.5 HP electric motor drive is about 30 mtrs/sec. Smooth & continuos variations of speed are provided over a wide range by means of aerodynamic speed control (Flap) mechanism combined with variable speed drive of the electric motor. A fixed pitch 4 bladed metal/wooden fan coupled to the electric motor by suitable couplings derives the tunnel. The entire tunnel expect the motor support structure is wooden construction. Large Plexiglas windows provided on both sides of test section permit easy accessibility for model mounting etc. Necessary static pressure connections for measurement of Tunnel speed have been provided

Procurement of the product from us is profitable, as we can provide it in wholesale any time of the year and ensure delivery is done on the postulated time. To protect our products from being damaged during transit/ handling, we use industrial grade packaging materials. Furthermore, we ensure the packs are appealing for marketing purposes. Tilting type Gauge, MS Powder coated.

The setup consists of  :
Control Panel  :

• PID Controller   - ( Electronic )
• Input   - 4 - 20 mA.
• Output  - 4 - 20 mA.
• Display  - 3.5 Digit.
• Proportional Band  - 2 - 500 %.
• Integral Action  - 0.05 - 50 R/min.
• Derivative Action  - 0.01 - 10 Min.
• I/P Converter :
• Input   - 4 - 20 mA.
• Output  - 0.2 - 1 Kg/ Cm2.
• Alarm Annunciator   -  4 Window.
• Hooter   - 1 No.
• Air Filter Regulator  -
• Input   - 0 - 10 Kg/Cm2.
• Output   - 0 - 2 Kg/Cm2.
• Control Panel   - It is fabricated from 16 gauge CRC sheet & well epoxy coated.  All the above instruments & wring will be mounted on panel.  All the connections & wring will be inside the panel.  Necessary switches, indicators are mounted on the panel.

Pressure Transmission & Final Control Element :
Electronic Pressure Transmitter :

• Range  -0 - 5 Kg/Cm2.
• Output  - 4 - 20 mA.
• Supply  - 24 V DC.
• Mounting - Field mounting type.
• Pneumatically actuated diaphragm Control valve
• Size  - 15 mm.
• Action - Air to Open.
• Seat & Plug - SS-316.
• Type - Linear Percentage  -  1 No.
• .Air Tank   - 2 Nos. with interconnecting valve pressure gauges mounted on the tanks.
• Air Compressor  -  2 HP, 3 Phase motion & Air Tank Cap. 100 Ltr.
• Instruction Manual  -  1 Copy.

Strain measurement with the help of resistance wire strain gauges weights, digit digital strain indicator with amplifier for strain gauge bridge circuit. Accessories include a cantilever beam mounted with strain gauges, weights.for the bridge circuit.

Features : This machine is used to test the fatigue strength of materials. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia. specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A completer cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a Digital counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of  IS 5075 - 1969.

• Light weight, compact size, simple design.
• Table model, no need of foundation.
• Simple lever system of changing load.
• Accurately calibrated as per IS 5075.
• Calibration in Nm available on request.

Range of Experiments to be Carried Out
To determine film heat transfer coefficient between the medium in which body is heated
To determine film heat transfer coefficient between the medium in which body is cooled

Range of Experiments to be Carried Out
To determine thermal conductivity of heat pipe
To observe and plot the temperature distribution along the length of the heat pipe
To observe the thermo siphon action in heat pipe called heat pipe action
The experiments can be conducted at various values of input & calculation can be made accordingly
To calculate & compare effectivness of heat pipe & other good thermal conductor pipes

Range of Experiments to be Carried Out
To determine thermal resistance & critical radious of insulating material
To determine Heat Transfer Co-efficient of Insulating Material
The experiments can be conducted at various values of input & calculation can be made accordingly

Range of Experiments to be Carried Out
To determine the thermal conductivity
The experiments can be conducted at various values of input & calculation can be made accordingly
To plot Heat flux Vs thermal conductivity

Our product is obtainable in risk-free and industrial grade packing material that make sure the goods are protected from damage and are delivered to buyers in unharmed conditions. Every item in our range is manufactured utilizing premium supplies sourced from renowned traders. Therefore, our products are reliable.

This includes following components :

• Double Acting Pneumatic Cylinders  -  2 Nos.
• Single Acting Pneumatic Cylinders  -  1 No.
• Five Port Double Pilot Valve  -  2 Nos.
• Five Port Single Pilot Valve spring return  -  2 Nos.
• Five Port Hand Level operated spring centered three position valve.  -  1 No.
• Three Port two position palm operated NO valve -  1 No.
• Three Port two position palm operated NC valve -  1 No.
• Three Port Single pilot Spring Return valve  -  1 No.
• Three Port Roller lever operated Return valve  -  4 Nos.
• Quick Exhaust valve.  -  1 No.
• Flow Control Valve.  -  1 No.
• Roller operated Electrical Limit Switches.  -  4 Nos.
• Three Port Double operated 230 V AC. solenoid Valve.  -  2 Nos.
• Work Bench operated components mounted on board & brass fittings fitted on all components. 15. Nylon Tubings. 500 mm.  -  10 Nos. 1000 mm.  -  1 Nos.
• Instruction Manual 1 Copy.

Range of Experiments to be Carried Out
To visualize the process of nucleate and film boiling on the heater and condensation on water cooling coils
To calculate Critical Heat Flux during process
To calculate heat release during condensation
The experiments can be conducted at various values of input & calculation can be made accordingly

The flume consists of a channel of size as in specifications. At the inlet a Flow steadying section is provided so that there will be fewer disturbances at the test section. The gates provided at the upstream and downstream of the Test section help to regulate the depth of flow. Depth measurements can be Achieved with the help of a hook or point gauge mounted on a trolley which Gives longitudinal and transverse movement. The slope of the bed can be Adjusted to give positive or negative slopes.

Range of Experiments :

• Study of specific energy curve.
• Study of hydraulic jump.
• Study of Nappe Profiles over a sharp crested weir.
• Calibration of sharp crested, Broad crested and ogee weir.
• Calibration of a Venturi flume.
• Study of Flow under the sluice gate.

Features :

• An arrangement to obtain quiescent flow.
• A point gauge Trolley for depth measurement.
• Tilting Pad.
• Models of Sharp crested, Broad crested and Ogee weir, venturiflume etc.
• Transperant middle half Test section for visualisation of flow over test section.6)Gate for regulating. The depth of flow, one at the upstream and the other at the downstream.

Pecifications :

• A point Gauge mounted on a trolley.
• Inlet pipe piece containing an orifice in it.
• A differential manometer (without mercury
• A screw jack for adjusting slope.
• A model of a sharp crested weir.
• A model of a Broad crested weir
• A model of an Ogee weir.
• A model venturi flume.
• Sluice Gate.

Service Required :

• Suitable water supply arrangement.
• Suitable Drainage or return gutter arrangement.
• Mercury 0.5 kg for manometer.

Pendulum Experiments :

• Simple Pendulum.
• Compound Pendulum.
• Bi-filler Suspension.

Longitudinal Vibration Experiment :

• Spring Mass System.
• Equivalent Spring Mass system for study of undamped free vibration.

Torsional Vibration Experiment :

• Single Rotor System.
• Two Rotor System.
• Single Rotor with viscous damping.

Damped Vibration Experiment :

• Verification of Dukerleys Rule.
• Forced rotor with viscous damping along
• With frictional HP Motor Strip chart recorder & control unit.

This is due to our stern quality checks that we are capable of delivering the best in class range of products. Even the raw material and inputs used undergo several quality inspections to ensure complete quality. Owing to our immense expertise in this domain, we have carved a niche as a Supplier of Locomotive Boiler in the market.

Range of Experiments to be Carried Out
To determine the cooling efficiency of Cooling Tower
To calculate cooling rate

Range of Experiments to be Carried Out
To determine Volumetric mass transfer coefficient (hD.a) for air, water system in a cooling tower
To study the temperature distribution along the height of the tower
The experiments can be conducted at various flow rates of Air & Water & calculation can be made accordingly
Experiment can be conduct on both Induced & Forced Draught condition
To determine & compare the efficiency of the tower from Induced & Forced Draught condition

Trinocular tube for addition of camera, projection screen, CCTV system. Trinocular Observatoin Head inclined at 450 of the horizontal, rotable through 3600, with high quality anti-reflection coated prisms to ensure highly accurate image with perfect collimation for strain-free observation. Adjustable interpupilary and dioptric distance. .Heavy duty quadruples revolving nosepiece, travelling on ball bearings. Co-axial focusing system, with slides travelling on ball bearings guideways. Provides the highest degree of sensitivity free from backlash, in operating the fine focusing of Optical System. .Coaxial precise graduated mechanical stage for X & Y movements of the object.

The Adsorption column consist of glass column filled with adsorbent. The feed is introduced from the top of the column . The solute from the feed solution is adsorbed on the adsorbent surface. After the operation the solution drain out and analysed.Steam

Range of Experiments to Be Carried Out :

• To study the Characteristics of adsorption with chemical reaction
• To calculate the amount of adsorption of solute on adsorbate
• To calculate the separation factor
• To plot the Freundlich adsorption isotherm.

Batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated.

Range of Experiments :

• Study of Batch Reactor
• To calculate the reaction rate constant k for given reaction in batch reactor

Range of Experiments to be Carried Out
To determine Heat transfer rate of heating & cooling
To determine Overall heat transfer coefficient
To calculate Effectiveness of heat exchanger
The experiments can be conducted at various values of input & calculation can be made accordingly