Neue Herbold Maschinen- Und Anlagenbau Gmbh

Sinsheim-Reihen, Germany

heavy duty granulators for size reduction of plastics made in germany - in much different sizes from 300mm rotor diameter up to 1000mm rotor diameter and a working width starting from 300mm up to 2400mm

LM Series Granulator is used to reduce the size of huge and thin walled materials like loose film, PVC pipes, automotive bumpers, barrels, web scrap etc. LM Series Granulator is comprised of a rotor and stator knives they together forms a cutting operation. LM Series Granulator is designed in such a way that it reduces the noise production and energy consumption. DesignThe housing is completely welded and can handle high impact or abrasive material when used with replaceable wear plates. Clean and consistent granulates due to counter-angled design of the rotor and stator knives for scissors-like cutting. Knives can be changed 60%faster and in a safer way. Housings resist cracking under heavy stress/shock as the rotor shaft bearings are mounted inside solid steel housings. Granulates are not contaminated by dust/fines and operation is cooler due to the outboard mounting. Rotor knives do not get loosened even with heavy shock due to better rotor designs. The attachment of knife bolts is done with a threaded clamp which is removable and replaceable. Needless drilling and tapping are avoided due to unthreaded rotor flights and knife carrier. Advantages

• Multipurpose use
• Because of the compressed design it requires less space
• Energy saving ability
• Double-cross cutting knife reduces the noise level
• Clam shell opening results in easy cleaning

Characteristics

• Enhanced through put rates
• No need for special knife sharpening fixture

NEUE HERBOLD is a German manufacturer of size reduction machines recycling machines for plastic and other waster materials (glass-wool, mineral-wool, lime-sand-stones etc). Our range of products: Granulators, Grinders, Pulverizers, Fine-Grinders, Pipe-Granulators, Profile-Granulators, Shredder, etc.For special application projects we can provide individual Taylor made machines and systems designed specifically for the customer's needs. Included in this vast equipment spectrum are machines (hammer mills, bale breaker, guillotines) to recycle computer hardware and software, insulation material etc. Our Products Type: 1. Plastic Machinery, 2. Recycling Equipment, 3. Plastic Recycling Machinery. Plastic Machinery: Heavy Duty Single Plastic Granulator for Plastic Recycling Size reduction of massive purgings start-up lumps, rubber bales, fiber, massive profiles, thick-walled pipes or sheet, etc. Applications:Neue Herbold SM series granulators are specially designed for all universal types of applications. Through simple modification the SM series granulators can be used for massive start-up lumps and purgings, massive profiles and general plastic scrap with extremely wall thicknesses. Also size reduction of voluminous hollow parts such as containers and crates. The SM series is designed for versatile use and considered a all round granulator for today's recycler. Design:SM series granulators are designed with rotor and stator knives that are counter angled to each other producing a true scissors type cutting action. This design results in a cleaner more uniform granulate and reduced heat build up in the granulate. Double angle cut also reduces noise emissions and energy consumption. All knives are straight sharpening and require no special knife sharpening fixture. All cutting knives are pre-adjusted to the proper size gap outside the granulator with the use of the knife setting fixture which creates a constant gap between rotor blade circumference and screen resulting in reduced friction and therefore less thermal stress of the material. Knife changes can be accomplished 60% quicker and safer then adjusting knives within the granulator. The bearings of the rotor shaft are mounted within solid steel housings (not castings) which offer more reliable service and eliminate any chance for the housings to crack or break under heavy shock loads. As opposed to flanged mounted bearings, outboard mounting prevents dustfines from fouling the bearing nor grease from contaminating the granulate. Outboard mounting provides for a quieter and cooler operation. Improved rotor designs eliminate any chance for the rotor knives to lift or loosen during heavy shock loads. The knife bolts attach to a removable and replaceable threaded clamp. The rotor flights nor the knife carrier are threaded preventing unnecessary drilling and tapping to repair stripped threads. The totally welded housing can also be equipped with replaceable wear plates when operating with high impact or abrasive material. Advantages:1. Universal Application Usage. (Size reduction of massive purgings start-up lumps, rubber bales, fibre, massive profiles, thickwalled pipes or sheet, thick packages of films etc.)2. Reduced Space Requirement Due To Compact Design. 3. Energy-Saving Size Reduction. 4. Low Noise Level Due To Double-Cross Cutting Knife Configuration. 5. Easy Cleaning Due To Clam Shell Opening Characteristics. 6. Higher Through Put Rates. 7. Reduced Down Time For Rotor And Stator Knife Replacement Due To Pre-Adjusted Knives. Specifications:Place of Origin: GERMANYBrand Name. NEUE HERBOLDModel-Number: SM Series in much different sizes availableType. Recycling granulator, Plastic recycling granulatorFeature: universal application useage, low noise, easy cleaningFunction. heavy duty granulator, plastic recycling granulator, plastic granulator, plastic crusher, rubber granulator, plastic granulation

SM Series Granulator is designed to reduce the size of extremely thick wall plastic material such as containers and crates. SM Series Granulator is versatile in nature that is it works as an all rounder and because of its size it requires less space to keep it. Beside all this SM Series Granulator also acts as an energy saver. DesignThe housing is completely welded and can handle high impact or abrasive material when used with replaceable wear plates. Clean and consistent granulates due to counter-angled design of the rotor and stator knives for scissors-like cutting. Knives can be changed 60%faster and in a safer way. Housings resist cracking under heavy stress/shock as the rotor shaft bearings are mounted inside solid steel housings. Granulates are not contaminated by dust/fines and operation is cooler due to the outboard mounting. Rotor knives do not get loosened even with heavy shock due to better rotor designs. The attachment of knife bolts is done with a threaded clamp which is removable and replaceable. Needless drilling and tapping are avoided due to unthreaded rotor flights and knife carrier. Advantages

• Multipurpose use
• Because of the compressed design it requires less space
• Energy saving ability
• Double-cross cutting knife reduces the noise level
• Clam shell opening results in easy cleaning

We are the most favored destinations for availing high quality SR Series Granulator in the market. The SR Series Granulator is of efficient quality and high on demand. ApplicationSR Series Granulator granulators are designed and manufactured for the size reduction of full length profiles and pipes eliminating the need to pre-cut the material into shorter lengths. The 6000 mm (20ft.) profiles or pipes are fed horizontally into the granulator. Generally the LP series granulators are used for the size reduction of PVC profiles and the SR series granulators are used for applications ranging from profiles to extremely thick walled PVC, PP and PE pipes. The SR series granulators are designed for most difficult applications, to achieve higher through put rates and insure a safe and reliable method of profile and pipe size reduction. SR Series Granulator is designed to instantaneously seize the profiles and let a factual automatic bring in of the profiles into the grinding chamber consequently results in an effortless material feed. The SR Series Granulator is designed by a horizontal feed channel that acts as material loading trough. For controlling and feeding the material in the grinding chamber automatically amperage load controlled material is used. All the way through the size reduction process to avoid the material fly-back the channel is equipped with hydraulically operated channel lid. DesignThe housing is completely welded and can handle high impact or abrasive material when used with replaceable wear plates. Clean and consistent granulates due to counter-angled design of the rotor and stator knives for scissors-like cutting. Knives can be changed 60%faster and in a safer way. Housings resist cracking under heavy stress/shock as the rotor shaft bearings are mounted inside solid steel housings. Granulates are not contaminated by dust/fines and operation is cooler due to the outboard mounting. Rotor knives do not get loosened even with heavy shock due to better rotor designs. The attachment of knife bolts is done with a threaded clamp which is removable and replaceable. Needless drilling and tapping are avoided due to unthreaded rotor flights and knife carrier. Advantages

• Multipurpose use
• Because of the compressed design it requires less space
• Energy saving ability
• Double-cross cutting knife reduces the noise level
• Clam shell opening results in easy cleaning
• Pre-adjusted knives used reduces the time consumed for rotor and stator knife replacement

Characteristics

• Enhanced through put rates
• No need for special knife sharpening fixture
• The knife bolts attach to a removable and replaceable threaded clamp

NEUE HERBOLD is a German manufacturer of size reduction machines recycling machines for plastic and other waster materials (glass-wool, mineral-wool, lime-sand-stones etc). Our range of products: Granulators, Grinders, Pulverizers, Fine-Grinders, Pipe-Granulators, Profile-Granulators, Shredder, etc.For special application projects we can provide individual Taylor made machines and systems designed specifically for the customer's needs. Included in this vast equipment spectrum are machines (hammer mills, bale breaker, guillotines) to recycle computer hardware and software, insulation material etc. Our Products Type: 1. Plastic Machinery, 2. Recycling Equipment, 3. Plastic Recycling Machinery. Plastic Machinery: Heavy Duty Single Plastic Granulator for Plastic Recycling Size reduction of massive purgings start-up lumps, rubber bales, fiber, massive profiles, thick-walled pipes or sheet, etc. Applications:Neue Herbold SM series granulators are specially designed for all universal types of applications. Through simple modification the SM series granulators can be used for massive start-up lumps and purgings, massive profiles and general plastic scrap with extremely wall thicknesses. Also size reduction of voluminous hollow parts such as containers and crates. The SM series is designed for versatile use and considered a all round granulator for today's recycler. Design:SM series granulators are designed with rotor and stator knives that are counter angled to each other producing a true scissors type cutting action. This design results in a cleaner more uniform granulate and reduced heat build up in the granulate. Double angle cut also reduces noise emissions and energy consumption. All knives are straight sharpening and require no special knife sharpening fixture. All cutting knives are pre-adjusted to the proper size gap outside the granulator with the use of the knife setting fixture which creates a constant gap between rotor blade circumference and screen resulting in reduced friction and therefore less thermal stress of the material. Knife changes can be accomplished 60% quicker and safer then adjusting knives within the granulator. The bearings of the rotor shaft are mounted within solid steel housings (not castings) which offer more reliable service and eliminate any chance for the housings to crack or break under heavy shock loads. As opposed to flanged mounted bearings, outboard mounting prevents dustfines from fouling the bearing nor grease from contaminating the granulate. Outboard mounting provides for a quieter and cooler operation. Improved rotor designs eliminate any chance for the rotor knives to lift or loosen during heavy shock loads. The knife bolts attach to a removable and replaceable threaded clamp. The rotor flights nor the knife carrier are threaded preventing unnecessary drilling and tapping to repair stripped threads. The totally welded housing can also be equipped with replaceable wear plates when operating with high impact or abrasive material. Advantages:1. Universal Application Usage. (Size reduction of massive purgings start-up lumps, rubber bales, fibre, massive profiles, thickwalled pipes or sheet, thick packages of films etc.)2. Reduced Space Requirement Due To Compact Design. 3. Energy-Saving Size Reduction. 4. Low Noise Level Due To Double-Cross Cutting Knife Configuration. 5. Easy Cleaning Due To Clam Shell Opening Characteristics. 6. Higher Through Put Rates. 7. Reduced Down Time For Rotor And Stator Knife Replacement Due To Pre-Adjusted Knives. Specifications:Place of Origin: GERMANYBrand Name. NEUE HERBOLDModel-Number: SM Series in much different sizes availableType. Recycling granulator, Plastic recycling granulatorFeature: universal application useage, low noise, easy cleaningFunction. heavy duty granulator, plastic recycling granulator, plastic granulator, plastic crusher, rubber granulator, plastic granulation

We offer highly efficient SMV Series Granulator in the market. The SMV Series Granulator offered by us is easy to use and has long lasting functional life. ApplicationsSMV Series Granulators are specially designed for all universal type of applications. In the course of simple modification the SMV Series Granulator are used for huge start-up lumps and removal, massive profiles and common plastic scrap with extremely thick wall. The SMV series is designed for multipurpose use and measured as all round granulator in recycling. SMV Series Granulator has a clam shell opening that makes it easy to clean. DesignThe housing is completely welded and can handle high impact or abrasive material when used with replaceable wear plates. Clean and consistent granulates due to counter-angled design of the rotor and stator knives for scissors-like cutting. Knives can be changed 60%faster and in a safer way. Housings resist cracking under heavy stress/shock as the rotor shaft bearings are mounted inside solid steel housings. Granulates are not contaminated by dust/fines and operation is cooler due to the outboard mounting. Rotor knives do not get loosened even with heavy shock due to better rotor designs. The attachment of knife bolts is done with a threaded clamp which is removable and replaceable. Needless drilling and tapping are avoided due to unthreaded rotor flights and knife carrier. Advantages

• Multipurpose use
• Because of the compressed design it requires less space
• Energy saving ability
• Double-cross cutting knife reduces the noise level
• Clam shell opening results in easy cleaning

Characteristics

• Enhanced through put rates
• No need for special knife sharpening fixture

NEUE HERBOLD SM series granulators are specially designed for all universal types of applications. Through simple modification the granulators can be used for the: - size reduction of massive start-up lumps - size reduction of massive purgings- size reduction of rubber bales- size reduction of massive profiles- size reduction of PA-fibers- size reduction of film packets- size reduction of bottle crates- size reduction of general plastic scrap with extremely wall thicknesses- size reduction of voluminous hollow parts such as containers and cratesThe SM series is designed for versatile use and considered a all round granulator for todays recycler.

We are one of the prominent Manufacturers and Suppliers of SX Series Granulator in the market. The SX Series Granulator offered by us is high on demand in the market. ApplicationsSX Series Granulator is specially designed to achieve extremely high output. The application varies from film, bunched or tangled bands and tapes, hollow containers like crates and PP big bags. When using a 800 mm (32 in.) rotor diameter together with a 2000 mm (79 in.) rotor width and 315 kw (425 hp) drive motor through put rates of 15, 000 kgs/h (33, 000 lbs/h) can be get Depending on the explicit screen size. DesignThe housing is completely welded and can handle high impact or abrasive material when used with replaceable wear plates. Clean and consistent granulates due to counter-angled design of the rotor and stator knives for scissors-like cutting. Knives can be changed 60%faster and in a safer way. Housings resist cracking under heavy stress/shock as the rotor shaft bearings are mounted inside solid steel housings. Granulates are not contaminated by dust/fines and operation is cooler due to the outboard mounting. Rotor knives do not get loosened even with heavy shock due to better rotor designs. The attachment of knife bolts is done with a threaded clamp which is removable and replaceable. Needless drilling and tapping are avoided due to unthreaded rotor flights and knife carrier. Advantages

• Multipurpose use
• Because of the compressed design it requires less space
• Energy saving ability
• Double-cross cutting knife reduces the noise level
• Clam shell opening results in easy cleaning
• Pre-adjusted knives used reduces the time consumed for rotor and stator knife replacement

Characteristics

• Enhanced through put rates
• No need for special knife sharpening fixture
• The knife bolts attach to a removable and replaceable threaded clamp