Our Products
Features:
COOLANTPUMPS RANGE:
COOLANTPUMPS RANGE:
WIDE RANGE OF APPLICATIONS
Turning | Grinding | Granite |
Filtration | Fountains | Boring |
Circulation | Washing | Drilling |
Heat treatment | Prininting | Milling |
Cutting | OilTransfer | Conveyor |
Cooling | Sawing |
PERFORMANCECHART OF "KP"SERIES | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Model | OUTLET SIZE | K.W. H.P. | Head in meters VS LPM | |||||||
2 | 4 | 6 | 8 | 10 | 12 | 14 | ||||
KP25 | 12mm | 0.08 | 0.1 | 25 | 10 | 0 | 0 | 0 | 0 | 0 |
KP40 | 20mm | 0.12 | 0.15 | 40 | 25 | 0 | 0 | 0 | 0 | 0 |
KP63 | 20mm | 0.18 | 0.25 | 63 | 40 | 0 | 0 | 0 | 0 | 0 |
KP80 | 20mm | 0.18 | 0.25 | 80 | 60 | 30 | 0 | 0 | 0 | 0 |
KP100 | 25mm | 0.25 | 0.34 | 100 | 80 | 65 | 0 | 0 | 0 | 0 |
KP160 | 25mm | 0.37 | 0.5 | 160 | 140 | 12 | 75 | 15 | 0 | 0 |
KP250 | 40mm | 0.55 | 0.75 | 250 | 245 | 200 | 130 | 80 | 0 | 0 |
Features:
Range :
Applications :
AC LPG Pump Techanical Secification:
DC Motor Specifications:
12 Volt DC PMDC Motor suitable for above pump, Take approximately 3 ampere current.
Material Of Construction:
Standard Cast Iorn Construction,
Scope Of Supply:
Dc lpg Pump With Suction and Delivery Pipes with Valve, Regulator and extra Diaphragm.
Applications and Industries:
Options and Features:
Metallurgy:-
This 12v ex-proof pump is especially for fueling the GASOLINE, (Diesel&Petrol) And its pump head with iron material, and with 100% copper lining, its specification as follows.
A.With Ex-proof protection.(CMRICERTIFICATE IS NOT AVAILABLE)
B.Pump with by pass and self priming.
C.Thermal overloads protection.
D.Filter and connectors
E.30-minute duty cycle/ not for continuousoperatio
A.Permanent magnet and continuous duty.
B.Inbuilt -Pressure switch automatically starts and stops pump when faucets is opened and closed.
C.Self priming so pump can be located above water tank / drumD.Runs dry for extended periods of time without damage.
E.Ideal for drum application.
F.Suitable for oil diesel and light acids. Not suitable for petrol, solvents and chemicals which affect on properties of plastic and rubber
eatures:
Model | Hp | Size | Head in Metres Discharge in LPM at 2900 RPM | |||||||||||||||||
3 | 5 | 7 | 10 | 12 | 15 | 17 | 20 | 22 | 25 | 27 | 30 | 35 | 40 | |||||||
CFS-1 | 0.25 | 12 x 12 | 40 | 32 | - | - | - | - | - | - | - | - | - | - | - | - | ||||
CFS-2 | 0.5 | 25 x 25 | - | 100 | 45 | - | - | - | - | - | - | - | - | - | - | - | ||||
CFS-3 | 1 | 25 x 25 | - | - | 140 | 120 | 70 | 35 | - | - | - | - | - | - | - | - | ||||
CFS-3A | 1 | 38 x 38 | - | - | 181 | 95 | 50 | - | - | - | - | - | - | - | - | - | ||||
CFS-4A | 1.5 | 38 x 38 | - | - | - | - | - | 160 | 130 | 90 | 75 | - | - | - | - | - | ||||
CFS-4B | 1.5 | 50 x 50 | - | - | - | - | - | 250 | 166 | 85 at 18mtr | - | - | - | - | ||||||
CFS-5A | 2 | 38 x 38 | - | - | - | - | 225 | 190 | 155 | 105 | 78 | 40 | - | - | - | - | ||||
CFS-5B | 2 | 50 x 50 | - | - | 330 | 250 | 160 | 85 | - | - | - | - | - | - | - | - | ||||
CFS-6A | 3 | 50 x 38 | - | - | - | - | - | - | 250 | 220 | 180 | 135 | 108 | 50 at 33mtr | ||||||
CFS-6B | 3 | 50 x 50 | - | - | - | - | - | 330 | 310 | 300 | 250 | 160 | 85 | - | - | - |
Model | Hp | Size | Head in Metres Discharge in LPM at 2900 RPM | ||||||||||||
16 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | |||||||
CFS-7A | 5 | 50 x 38 | - | - | 260 | 230 | 190 | 145 | 90 | - | - | ||||
CFS-7B | 5 | 65 x 50 | 400 | 370 | 300 | 230 | 180 | - | - | - | - | ||||
CFS-8A | 7.5 | 50 x 38 | - | - | 290 | 280 | 250 | 225 | 190 | 120 | 60 | ||||
CFS-8B | 7.5 | 65 x 50 | 500 | 450 | 385 | 280 | 230 | - | - | - | - | ||||
CFS-9A | 10 | 50 x 38 | - | 500 | 480 | 470 | 450 | 410 | 350 | 290 | 190 | ||||
CFS-9B | 10 | 65 x 50 | 560 | 510 | 450 | 370 | 280 | 210 | 150 | - | - |