Deep Explo Equipments Pvt Ltd

Aligarh, Uttar Pradesh

• CertificationISO 9001:2008 Certified
• ApplicationMotors Machines & Power Tools
• Country of OriginIndia

Largest range of mechanical spares for KP 120 and KP 160 machines All sort of punches i.e., draw punches, ASA, PETN & DELAY pressing punches. Tungsten carbide draw dies. On Demand we can also supply empty Aluminum, Copper and Steel Detonator Shells. Fuse Heads in different resistance range. Accurate spares for all the machines and systems whether proprietary or custom-built. Aluminum wire for packaging machines range 1.5mm to 2.7 mm dia. Plastic plugs for Detonator shells. Aluminum / Copper clips for TCM-97. Aluminum & Zinc Die casted Components. Spinning Machine Clutch Plate All Sizes. Spinning Machine Cone. Spinning Machine Cellophane Die. Spinning Machine Upper Die. Spinning Machine Lower Die. DF Coating Die Printing Roller Printing Roller Wiper Element Transfer Plate. Guide Block Hylam Block Punch Plate Laddle MS Base Plate Conical Laddle Plate with Handle Element Punch Pilot Punches

slurry and emulsion packaging machinery dcm-3 it is used for clipping slurry or emulsion cartridges. varied dimensions supported from 70 mm to 200 mm. the machine is pneumatically actuated. aluminum wire used for clipping. automatic feeding and in-built straightening of wire. rate of production – 45 clips / minute. dcm-4 it is used for clipping slurry or emulsion cartridges. varied dimensions supported from 60 mm to 200 mm. the machine is pneumatically actuated. aluminum pre formed clips used for clipping. rate of production – 45 clips / minute. dcm-15 it is used for clipping slurry, emulsion cartridges and resin capsules. varied dimensions supported from 25 mm to 50 mm. the machine is pneumatically actuated. aluminum pre formed clips used for clipping. rate of production – 45 clips / minute t.t.c.f-2 better known as twin clipping, filling and clipping machine. it is used in the slurry, emulsion and resin cartridge packing. it is used to apply two clips ¾ inches apart, and cutting in between. works on a wire feeding system instead of using pre made clips. supports 25mm and 32 mm dia cartridges. much more economical and productive than its alternative. t.t.c.f-3 better known as twin clipping, filling and clipping machine it is used in the slurry, emulsion and resin cartridge packing. it is used to apply two clips ¾ inches apart, and cutting in between. it uses pre formed clips to pack cartridges. supports 25mm and 32 mm dia cartridges. tcm – 97 twin clipping & cutting machine it is used for small diameter packing. sizes supported- 25mm and 40 mm. uses pre-made clips. pre-made clips can be of aluminum or copper. saves layflat material due to cutting operation. uses pre-made clips. pre-made clips can be of aluminum or copper. saves layflat material due to cutting operation. compact and easy to handle. can be manually operated as well as pneumatically. compact and easy to handle. economically priced for beginners. sfc electro pneumatic paper shell filling and crimping machine it is used for filling and crimping empty paper shells. cap insertion and crimping done by the machine itself. amount of emulsion measured and controlled. no spilling of emulsion during filling. safety features include no dispensing while no paper cups are present. productivity of up to 20 pcs. Per minute. afm-32 small dia. Blow molded tube filling & packing machine. it is used for filling and crimping empty blow molded tubes. cap insertion and crimping done by the machine itself. amount of emulsion measured and controlled. no spilling of emulsion during filling. safety features include no dispensing while no paper cups are present. works best with the ddu productivity of up to 20 pcs. Per minute. ddu’ automatic dripless dosing unit for blow moulded tubes it is used to fill emulsion or slurry into the hopper. the dosage done is dripless. no wastage of material while dosing. compatible with afm-32. dosing speed- 40 pieces per minute.

ONE SIDED TIN COATING MACHINE This unit eliminates tinning of brass strips on both sides and thus saves wastage of tin. The unit has the capacity of tinning at the rate of 2000mm per MINUTE It gives an accuracy up to 5 microns. COMB BLANKING MACHINE This machine is provided with automatic feeding and scissel winding system. This unit gives a production rate of 240 pairs of poles/MINUTE. “FFM” PLASTIC FETTERING MACHINE It is used to apply PVC molding directly on the fusehead comb strip. It can achieve a speed of over 1000 pairs per minute The speed achieved is over 12 times that of the conventional methods. Completely automatic operation requiring only supervision. Adjustable rate of material dispensing. It is a very compact machine. PPM P.P. STRIP FETTERING MACHINE This machine uses P.P. Strip in place of HDPE for fettering. The production rate is 75 fuseheads / MINUTE. HEAD FRAME MOUNTING MACHINE This unit is used for welding Nichrome wire on the fusehead. The unit consists of a number of Punches and dies Required for cutting extra strip. Pole bending tools forming the poles along with Nichrome wire. Strip feeding attachment Burning attachment for extra Nichrome Wire. Cutting the strip in desired length. Rate of production – 75 fusehead/minute. FUSEHEAD DIPPING UNIT The machine is used for precise coating of chemical on fuse heads. This unit comprises of dipping machines and drying ovens. Automatic transfer from dipping operation to drying oven. The capacity is of 2 ladles per minute. Each ladle can contain up to 30 fusehead combs with each containing 21 fuseheads each. Rate of Production – 1260 fuseheads per minute. FUSEHEAD AUTO SORTING MACHINE This machine is used to test the fuse combs for desired resistance. Variable value of resistance to be checked can be set by the user. Automatically sort acceptable and non-acceptable fuseheads into different collection bins. FUSE HEAD GRADING MACHINE. This machine segregates the fuseheads as per the coating thickness. Completely automatic operation requiring only supervision. Made to be used after the Fusehead auto sorting machine.

CUPMAN It is used to make cups from metal sheets. Supports production of Aluminum, Steel and copper cups. Production rate of maximum 32400 cups per hour. Automatic feeder for the sheet. Supports many different dimensions for the cups. Automatic lubrication through a central lubrication unit. Tooled up according to the buyer’s requirement. SHELLMAN This machine is used to make deep drawn shells/tubes from pre drawn cups. Supports automatic feeding of cups. The feeding system checks the alignment of the pre drawn cups before they even reach the machine. Completely automatic operation requiring only supervision. Supports inching of the slide and step-less interruption. Supports numbering at the bottom of the shell/tube. Safety features include a central automatic lubrication system. Supports many different dimensions for the shells/tubes. Supports the production of Aluminum, Steel and copper shells. Tooled up according to the buyer’s requirement. Production rate of 4500 pieces per minute. WASHING AND DEGREASING UNIT This machine is used to clean and degrease the cups and/or shells. Supports different cleaning operations. Shells once cleaned through this unit pass quality tests (like the flour test) Unit encompasses polishing through rice husk or saw dust. Custom built degreasers as per the customer’s choice also available.