Our Products
ROLLRING TRAVERSE UNITS are positive drives, which convert the constant speed rotation of the shaft into variable speed, variable stroke, reciprocating motion without changing the direction of shaft rotation.This is a unique method of converting rotary motion into linear reciprocating motion on the principle that contact pressure created between a correctly dimensioned ring and shaft assembly enables significant forces to be transmitted.The rate of advance of the unit on the shaft is directly related to the angle of the contact between the ring and the shaft. The traverse direction reverses instantaneously and automatically.
Traverse Unit with 3 Bearing Traverse Unit with Four Bearing
1. HT 1 (Shaft 10 mm.) 4RR 15 ( Shaft15 mm.)
2. HT 2 (Shaft 15 mm.) 4RR 20 (Shaft 20 mm.)
3. HT 3 (Shaft 20 mm.) 4RR 30 (Shaft 30 mm.)
4. HT 3N (Shaft 30 mm.) 4RR 40 (Shaft 40 mm.)
5. HT 4 (Shaft 40 mm.) 4RR 50 (Shaft 50 mm.)
6. HT 5 (Shaft 50 mm.) 4RR 60 (Shaft 60 mm.)
7. HT 6 (Shaft 60 mm.) 4RR 80 (Shaft 80 mm.)
8. HT 8 (Shaft 80 mm.)
DEL JAYESSNUTECKROLLERCHAIN COUPLINGARE BEING USED BY ALL INDUSTRIESLOCATEDINDELHI, GURGAON, SONEPAT, PANIPAT, CHANDIGARH, PALWAL, GHAZIABAD, NOIDA, ALWAR, PUNE, BOMBAY, RAJASTHAN, JAIPUR, RUDRAPUR, UTTRAKHANDAND ALLINDIA, USA, UK, GERMANY
DEL-JAYESSManufacturersRoller Chain and conveyor chain Sprocketson imported hobbing Machine from quality material.
We can offer PrecisionSimplex, Duplex and Triplex Sprocketswith or withoutHUB.Plate type sprocketscan also be offered.
MaterialUsed:EN 8, EN 9, EN 31, MS, C 45, Stainless steel, Brass, Aluminium, Nylon can be used for sprockets
Torque Limiter, aprotective devicetolimit torque, transmitted in a drive system by slipping when torque demand exceeds a pre set value as aresult of Shock Load * Overload or Machine Jam. It Automatically reengages when Overload Torque Normalises to preset value, no resetting required
Torque Limiterutilizes spring loaded friction surfaces for operation and preset by adjustment of spring force.
TORQUE LIMITERcan be used with a Sprocket, Gear, Sheeve, Pulley or Flange Plate as a centre member, clamped between two friction liners.Available in different models with variable & adjustable Torque Limits.
Torque LimitersPrevents Machine damage, accidents and prevents motor/gearbox and primemover form damages and also eliminate costly down time.
TORQUE LIMITER COUPLING MODEL |
PARALLEL MAX. (MM) |
ANGULAR MAX. DEGREE |
MIN. | MAX. |
TORQUE LIMITER MM |
CPLG. SKPT. MM |
TORQUE LIMITER MM |
CPLG. SPKT. MM |
A | B | C | D | E | F | KGS. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50 M1C 50 M2C | 0.2 | 1/2 |
0.3 0.6 |
1.5 2.5 |
14 | 28 | 8 | 10 | 55 | 77 | 50 | 24 | 29 | 2 | 1.0 |
65 MIC 65 M2C | 0.25 | 1/2 |
0.7 1.4 |
2.8 5.6 |
22 | 48 | 10 | 10 | 80 | 102 | 76 | 25 | 50 | 3 | 2.0 |
90 M1C 90 M2C | 0.30 | 1/2 |
2.0 3.5 |
7.0 14.0 |
28 | 56 | 12.7 | 19 | 103 | 137 | 106 | 40 | 65 | 3 | 6.50 |
125 M1C 125 M2C | 0.38 | 1/2 |
5.0 6.5 |
18.0 36.0 |
38 | 70 | 19 | 22 | 121 | 188 | 150 | 45 | 78 | 3 | 13.0 |
150 M1C 150 M2C | 0.38 | 1.2 |
7.5 9.0 |
44.0 61.0 |
42 | 90 | 25 | 25 | 144 | 206 | 180 | 50 | 90 | 3 | 21.0 |
180 MIC 180 M2C | 0.50 | 1/2 |
11.0 22.0 |
58.0 110.0 |
64 | 100 | 25 | 25 | 176 | 176 | 200 | 64.3 | 106 | 3 | 34.0 |
225 M1C 225 M2C | 0.70 | 1/2 |
20.0 40.0 |
140.0 175.0 |
92 | 160 | 30 | 40 | 205 | 308 | 244 | 92 | 120 | 3 | 65 |
slip hub torque limiter
torque limiter, aprotective devicetolimit torque, transmitted in a drive systemby slippingwhen torque demand exceeds a pre set value as a result of shock load*overloadormachine jam. itautomaticallyreengageswhen overload torque normalises to preset value, no resettingrequired
torque limiterutilizes spring loaded friction surfaces for operation and preset by adjustment of spring force.
this can be used with a sprocket, gear, sheeve, pulley or flange plate as a centre member, clamped between two friction liners.available in different models with variable & adjustable torque limits.
torque limiterspreventsmachine damage, accidentsandprevents motor/gearboxand primemoverform damagesand also eliminate costly down time
availablelargest range oftorque limitersinour stockindelhi, faridabad, gurgaon, ghaziabad, noida, sahibabad, punjab, rajasthan, alwar, jaipur, haryana, utter pradesh, maharashtra, chennai, bangalore , himachal.
TORQUE LIMITER MODEL |
TORQUE CAPACITY MIN |
TORQUE CAPACITY MAX. |
PILOT MIN. BORE |
MAX BORE |
APPROX WT KG |
A | B | C | D |
M MAX. |
FSPROCKET BORE DIA |
---|---|---|---|---|---|---|---|---|---|---|---|
TL 50 M1 | 0.3 | 1.5 | 8.0 | 14 | 0.3 | 50 | 29 | 24 | 6.5 | 7.2 | 30.10 |
TL 50 M2 | 0.6 | 2.5 | 8.0 | 14 | 0.3 | 50 | 29 | 24 | 6.5 | 7.2 | 30.10 |
TL 65 M1 | 0.7 | 2.8 | 9.6 | 22 | 0.5 | 65 | 50 | 35 | 15 | 8.8 | 41.40 |
TL 65 M2 | 1.4 | 5.5 | 9.6 | 22 | 0.5 | 65 | 50 | 35 | 15 | 8.8 | 41.40 |
TL 90 M1 | 2.0 | 7.0 | 12.7 | 28 | 1.5 | 90 | 65 | 45 | 18 | 16.0 | 52.00 |
TL 90 M2 | 3.5 | 14.0 | 12.7 | 28 | 1.5 | 90 | 65 | 45 | 18 | 16.0 | 52.00 |
TL 125 M1 | 5.0 | 18.0 | 19.0 | 38 | 3.5 | 125 | 78 | 60 | 23 | 16.0 | 70.00 |
TL 125 M2 | 6.5 | 36.0 | 19.0 | 38 | 3.5 | 125 | 78 | 60 | 23 | 16.0 | 70.00 |
TL 150 M1 | 7.5 | 44.0 | 25.0 | 42 | 5.5 | 150 | 90 | 70 | 26 | 23.0 | 80.00 |
TL 150 M2 | 9.0 | 61.0 | 25.0 | 42 | 5.5 | 150 | 90 | 70 | 26 | 23.0 | 80.00 |
TL 180 M1 | 11.0 | 58.0 | 25.0 | 64 | 10.0 | 180 | 106 | 100 | 28 | 28.5 | 110.00 |
TL 180 M2 | 20.0 | 110.0 | 25.0 | 64 | 10.0 | 180 | 106 | 100 | 28 | 28.5 | 110.00 |
TL 225 M1 | 22.0 | 140.0 | 30.0 | 92 | 20.0 | 230 | 120 | 140 | 33 | 28.5 | 152.00 |
TL 225 M2 | 40.0 | 175.0 | 30.0 | 92 | 20.0 | 230 | 120 | 140 | 33 | 28.5 | 152.00 |
These areself tapping threaded insertswhich do not require any taps at all .these are threaded from both inside and out side.These threaded inserts can beused in soft materialslikewoods , plastics, rubbers, mild steel, alluminium, brass, zinc or any soft material.
The mainadvantagesof these threaded inserts are that they aresolid insertswhich arecase hardenedto withstandvery high loadsand when used in light alloysa high degree of pull out strengthis achieved which far exceeds the yield strength of mating screw
AVAILABLE IN MANYMATERIAL TO SUIT YOUR REQUIREMENT LIKE
WE OFFERHARDENED AND GROUND SHAFTSFORTRAVERSE UNITSAND LINEAR BEARING APPLICATION. THESE SHAFTS ARE MADE FROM HIGH QUALITY MATERIAL FOR HIGH LIFE
WE ARE SPECIALIZES INTEFLON MOULDED COMPONENTSIN NORMAL TO FILLED TEFLON LIKEBRONZE FILLED TEFLON, GLASS FILLED TEFLONAND SPECIALHI GRADE TEFLONFOR CRITICAL APPLICATIONS