Write a Review
Our Products
We offer a complete product range of Taper Bush Weld on Hub and Taper Bush Bolt on Hub
DERK Taper Bush Weld Hub made of steel material to weld with rotating elements like Impellers, Sprockets, Steel Pulley, Rotors, Agitators and many other device for secure mounting assembly.
DERK weld hub are design for use with the universally accepted taper bush made by standard manufacturer.
It is recommended to weld on larger hub diameter D1 and 45 degree continuous weld be used. Do not use excess weld for avoid distortion.
| Product Code | BUSH USE | D1 | D2* | D3 | L1 | L2 | L3 |
|---|---|---|---|---|---|---|---|
| WH 1210 | 1210 | 70 | 65 | 64.5 | 25 | 9 | 10 |
| WH 1610 | 1610 | 80 | 75 | 74.5 | 25 | 9 | 10 |
| WH 2012 | 2012 | 95 | 90 | 89.5 | 32 | 12 | 12 |
| WH 2517 | 2517 | 115 | 110 | 109.5 | 44 | 19 | 15 |
| WH 3020 | 3020 | 145 | 140 | 139.5 | 50 | 20 | 15 |
| WH 3525 | 3525 | 190 | 180 | 179.5 | 65 | 25 | 25 |
| WH 4030 | 4030 | 200 | 190 | 189.5 | 76 | 32 | 30 |
| WH 4535 | 4535 | 210 | 200 | 199.5 | 89 | 40 | 30 |
| WH5040 | 5040 | 230 | 220 | 219.5 | 102 | 40 | 35 |
DERK Taper Bush Bolt Hub are convenient to mount rotors, Impellers, Agitators and other rotating device with the use of bolts for secure shaft mounting assembly.
DERK Bolt On Hub assembly are design for use with the universally accepted taper bush.
| Product Code |
BUSH USE |
D1 | D2 | D3* | D4 | D5 | L1 | L2 | L3 | L4 | BOLT USE |
|---|---|---|---|---|---|---|---|---|---|---|---|
| BH1210 | 1210 | 120 | 100 | 80 | 74 | 80 | 25 | 10 | 6.5 | 2.5 | M6 |
| BH1610 | 1610 | 130 | 110 | 90 | 84 | 90 | 25 | 10 | 6.5 | 2.5 | M6 |
| BH2012 | 2012 | 145 | 125 | 100 | 99 | 100 | 32 | 13 | 8.5 | 2.5 | M8 |
| BH2517 | 2517 | 185 | 155 | 130 | 120 | 119 | 44 | 20 | 11.5 | 2.5 | M10 |
| BH3020 | 3020 | 230 | 190 | 165 | 146 | 147 | 50 | 20 | 11.5 | 2.5 | M16 |
Vijay Patel/kailash (Derk Industries)
Shree Hari Industrial Zone-2
Street No. 11
Aji Ring Road
B/h. Akash Hotel
Rajkot- 360002
Gujarat - India
Share us via
