Write a Review
Our Products
We offer the best product range of 4 Digit Timer and Digital Synchronized Clock.
ZEUS presents PTR_0X , a very stable, reliable and optically isolated Timer which has 4 digit Timer which is fully programmable. This can accept different type of inputs like NPN-proximity switch, PNP-proximity switch, infrared sensors, magnetic sensors or contact closers. The different ranges can be programmed with OFF delay/ON delay and this can be used as a cyclic timer (equal time / unequal time).
This timer can be used in different modes like power ON start, start with external trigger, keep start till external trigger is available & it goes off when trigger is removed, Timer stops and it restarts when trigger (input) is available again.
Feature
Application
| SR. | Programmable Timers | Model No. |
|---|---|---|
| 01. | 4 Digit Programmable Single Timer with Universal Input and 1 Relay Output | PTR_01 |
| 02. | 4 Digit Programmable Cyclic Timer with Universal Input and 2 Relay Output | PTR_02 |
| 03. | 4 Digit Programmable Triple Timer with Universal Input and 3 Relay Output | PTR_03 |
Specification
| Product | Timer |
|---|---|
| Model No. | PTR_01/PTR_03 |
| Range | 9.999 sec, 99.99 sec, 9999 sec, 9.999 min, 99.99 min, 999.9 min, 9999 min, 9.999 hr, 99.99 hr |
| Sensor | Potential free contacts NPN or PNP Proximity, Infra Red Sensor, Contact Closers |
| Display | 7 Segment |
| Memory | Non-volatile Memory |
| Setting | Keyboard |
| Input | Start, Stop, Reset |
| Control Output | 1 Relay 6A, 1 C/O |
| Function | On Delay / Off Delay / Cyclic |
| Set Point | 1 |
| Display Selection | Running Time/Set Point |
| Special Features | Cyclic Timer with no. of counts |
| Multiplier | NA |
| Divider | NA |
| Optically Isolated Inputs | Yes |
| Reset | Auto/Maunal |
| Programmable Decimal Point | Yes |
| Power Down Mode Selectable | Yes (On Range Select) |
| Supply | Universal 90V to 260V AC |
| Humidity | 0 to 55 ° C |
| Working Temperature | 0-90%RH(<40 °C) - Non Condensive |
| Dimension | 72x72x120, 48x 96x120,48x48 mm |
| Cutout | 68x68, 44x92, 42x42 mm |
| Optional | - |
ZEUS presents DSC-0X a very stable reliable synchronize clock with status indicator for Pharmaceutical Industries, Hospitals and warehouses. This is required in FDA approval under 21CFR part- 11 rule. This is an intrinsically safe housing in SS304 enclosure which can be concealed in the wall.
Available in three different models.
Feature
Applications
Overview Synchronize clock is enclosed in SS. enclosure with weather proof enclosure which can be concealed. These clocks can only be programmed through password because law required it should be temper proof.
Zeus Controls Pvt. Ltd. (Zeus Controls Pvt. Ltd.)
276, Maruti Mansion, 2nd Floor,
Konapanna Agrahara, Hosur Road,
Bangalore - 560100, Karnataka, India
Share us via
