Name: Dhanlaxmi Steel Distributors.
Address: 38-a, Krishna Baugh Bldg, 2nd Parsiwada., Girgaon, Mumbai, 400004, India

Our Products

Flanges

Our product range contains a wide range of Blind Flanges, Pipe End Caps and Hydraulic Flange

Size 1/8" NB TO 48"NB.
Standards ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6, 10, 16, 25, 40 Etc.
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Dimensional Tolerances Of Blind Flanges ASME B16.5

Outside Diameter ≤ 24 = 1.6 mm \| > 24 = ± 3.2 mm	Inside Diameter not applicable
Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm 6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm	Outside Diameter of Hub ≤ 12 = + 2.4 mm / - 1.6 mm \| ≥ 14 = ± 3.2 mm
Diameter of Counterbore not applicable	Drilling Bolt Circle = 1.6 mm \| Bolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle with Respect to Facing ≤ 2½ = 0.8 mm max. \| ≥ 3 = 1.6 mm max.
Thickness ≤ 18 = + 3.2 mm / - 0 \| ≥ 20 = + 4.8 mm / - 0	Length thru Hub ≤ 18 = + 3.2 mm / - 0.8 mm \| ≥ 20 = + 4.8 mm / - 1.6 mm

Size 1 / 2" (15 NB) to 48" (1200NB)
Number Of Flower Seamless / ERW / Welded / Fabricated
Standards ASME / ANSI - B 16.9, ASTM A403 - ASME SA403, ASME B16.9, ASME B16.25, ASME B16.28, MSS SP-43.
Wall Thickness 2-40 mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160.
Form Pipe Caps, End Caps, Pipe End Caps

Tell Us What are you looking for? Will call you back

Jeetu B Shah (Dhanlaxmi Steel Distributors.)
38-a, Krishna Baugh Bldg, 2nd Parsiwada., Girgaon, Mumbai, Maharashtra - 400004, India
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.

Outside Diameter ≤ 24 = 1.6 mm \| > 24 = ± 3.2 mm	Inside Diameter not applicable
Diameter of Contact Face 1.6 mm Raised Face = ± 0.8 mm 6.35 mm Raised Face, Tongue & Groove / Male-Female = ± 0.4 mm	Outside Diameter of Hub ≤ 12 = + 2.4 mm / - 1.6 mm \| ≥ 14 = ± 3.2 mm
Diameter of Counterbore not applicable	Drilling Bolt Circle = 1.6 mm \| Bolt Hole Spacing = ± 0.8 mm Eccentricity of Bolt Circle with Respect to Facing ≤ 2½ = 0.8 mm max. \| ≥ 3 = 1.6 mm max.
Thickness ≤ 18 = + 3.2 mm / - 0 \| ≥ 20 = + 4.8 mm / - 0	Length thru Hub ≤ 18 = + 3.2 mm / - 0.8 mm \| ≥ 20 = + 4.8 mm / - 1.6 mm

Dhanlaxmi Steel Distributors. Girgaon, Mumbai, Maharashtra