Environmental conditions
Temperature: 15 - 30 C (59 - 86F)
Humidity: 15 - 75% RH
Rate of change of temperature: 0.5C/minute (0.9F

Regulatory
510K K051494 FDA Approval
CE
Device Directive 93/42 EC for class 1 Device

Floor to Wall column with a counterbalanced travel of the X-Ray Tube head arm .
Suitable for X-Ray Rooms having less space, low height .
Can be configured to have an output of: 100 kVp, 60 mA and 100kVp, 100mA.

GENERATOR SPECIFICATIONS

TheEco-Diagnoste-100is aFULLWAVE RECTIFIEDsystem & delivers an excellent radiographic output of:

100 mA from 40 to 80 KV for 0.4 secs. ( 40 mAs )
80 mA from 40 to 90 KV for 0.8 secs. ( 64 mAs )
60 mA from 40 to 100 KV for 2.0 secs. (120 mAs)
40 mA from 40 to 100 KV for 5.0 secs. (200 mAs)

Input :230 VAC, 15 Amp., 50Hz.
Timer :0.04 to 5.0 secs. 23 steps.

Floor to Ceiling column with a counterbalanced travel of the X-Ray Tube head arm .
TheBasic Diagnostic Systemcan be configured with an output of 100kVp, 100mA i.e.Basic-Diagnoste-100 & Basic- Diagnoste-300 ( 125kVp, 300mA).

GENERATOR SPECIFICATIONS

100 mA from 40 to 80 KV for 0.4 secs. ( 40 mAs )
80 mA from 40 to 90 KV for 0.8 secs. ( 64 mAs )
60 mA from 40 to 100 KV for 2.0 secs. (120 mAs)
40 mA from 40 to 100 KV for 5.0 secs. (200 mAs)

Input :230 Volts, 15 Amp.
Timer :0.04 to 5.0 secs. 23 steps.

GENERATOR SPECIFICATIONS : Basic-Diagnoste-300
GeneratorDiagnoste- 300delivers the excellent radiographic output as given below :

RADIOGRAPHY LARGE FOCUS :
300 mA from 40 to 90 kV from 0.02 to 0.4 secs. ( 120 mAs )
200 mA from 40 to 100 kV from 0.02 to 1.3 secs. ( 260 mAs )
100 mA from 40 to 125 kV from 0.02 to 3.0 secs ( 300 mAs )

RADIOGRAPHY SMALL FOCUS :
150 mA from 40 to 90 kV from 0.02 to 2.0 secs. ( 300mAs )
100 mA from 40 to 100 kV from 0.02 to 5.0 secs. ( 500 mAs )
50 mA from 40 to 125 kV from 0.02 to 5.0 secs .( 250 mAs )

Input voltage: 440VAC, 3 phase, 30KVA
Timer : 0.02 to 5.0 Secs. 23 Steps.

Product description
We provide various high power generator models ranging from 16kW to 80kW for both radiographic and fluoroscopic systems. Superior power conversion efficiency and newly designed high-tension transformer accomplish stable output of x-rays with minimal ripples, lower patient radiation dose and more vivid and accurate radiographic images compared with traditional single-phase full wave type generators. Its excellent output efficiency and compact sized designs enhance economic use of space and cost saving. It is equipped with user-friendly operation panels and system software operating on anatomical programmer configurations. Customized powers and functions that meet your requirements will be offered .

Product specification/models
Standard Features
High power, high frequency generator adopting phase-shift pulse width modulation
Precise mA and kVp feedback control
High-speed rotor control with rapid response
Programmed calibration satisfying specification of various X-ray tubes and cable length
System check program with error code display improving fast fault detection
One-year warranty service
Convenient interface module helps easy configuration of X-ray system

Operation Panel
APR settings over 500 views
Automatic settings of optimal technical conditions for the best images
Select on state of art anatomical graphics with touch screen (Network version)
Manual storage of APR and system data by operator
User-friendly operation console and data display

Other Functions
Input Power
AC 200V/ 220V/ 240V-SINGLE PHASE
AC380V/400V/440V/480V- THREE PHASE

AEC Selection (Option)
High precision of "exposure time mode selection" and "mAs mode selection".
Use three-field iron chamber or photo detector
Film/screen speed combination selection

ABC Selection (Option)
In Fluoroscopy mode, Fluoro Pulse rate selection function.

Abc Selection (Option)
Computer based operation panel enables easy selection and operation of various APR data as well as the search and storing the best conditions for exposures.

1. 1/4 CMOS 2, 000, 000pixels (2MPixels)
2. High resolution, High sensitivity, High performance
3. DSP 10bits
4. Compact Size, Easy to use and focus
5. Reliable light source with 6 pieces of white light LED
6. Display amazing clear images in two different viewing modes: Live and Freeze
7. Power Supply: None needed, powered through USB cable
8. Effective Pixels ( H x V ): 1200*1600

Accessory:(Intra oral cameras cable*1, sheaths*50, CF disk *1)

Available in two types:( 1) Using CFL Lamp (2) Using LEDs.

Model Exslim(using CFL Lamp)
Extra slim casing, attractive design with uniform illumination.
Very Light weight body made of Acrylic therefore safe for the doctors as it is electrically Non Conductive.
Long Life, reliable.

LED X-Ray Viewers: ModelExslim-L
Very Slim casing
Better illumination (more uniform) than CFL Lamps or any other Lamp.
Very long Life and more reliable than Lamps.

Low electricity consumption & Eco friendly.

This is our most popular mobile protective barrier. Powder coated steel frames for years of trouble free service completely enclosing the leaded glass panel for increased durability and safety. 2.00mm lead equivalent optically clear lead glass to prevent shattering. 1.5mm lead equivalent opaque base covered in for easy cleaning and durability. Exclusive 1.5mm lead equivalent floor drape, the only barrier made with complete head to toe protection. 4 hospital grade casters, two with locks for ease of movement and positive positioning.

0.5mm lead equivalent protection.
Hook n Loop Closure.
Will fit up to a 20" neck size.
Available loose or tethered to apron.

Direct Halogen Spot Light

Very attractive state of the art examination light with optimal halogen illumination 12v 50w suitable for operations in offices of Gynecologists and dentists and for diagnosis in other medical fields. The focusing lens at the instruments head allows adjusting the size of the Illuminated examination field. The light intensity can be adjusted by means of the rheostat.
The highly flexible special arm can be moved in all directions and remains in the requested Position. The examination light is available as desk model, wall model or floor model with mobile steel stand (Iron cast base), black powder coated. The practical universal clamp Allows attaching the desk model also to beds or rails in hospitals.

Halogen Spot Light with Floor Stand
Halogen Spot Light with Table Stand
Halogen Spot Light with Wall Mount

Mini Examination Light

Very attractive state of the art examination light with optimal Halogen illumination 6v 20w suitable for operations in offices of gynecologists and dentists and for diagnosis in othermedical fields. The light intensity can be adjusted by means of the rheostat.

Specification
Halogen Exam Light with 6v 20w Lamp
Compact and very Light weight Hand Held Exam Light.
Variable light intensity.

Binocular Loupe

Binocular Loupe integral with precision Optics with exceptionally lightweight
They are perfect for many applications. General Medicine, Dermatology, General-, Plastic
and Neurosurgery, ENT, Ophthalmology, Veterinary and Dental Medicineetc

Binocular Loupe 3.5x with Small Frame

Binocular Loupe 3.5x with Large Frame

Binocular Loupe 4.5x with Small Frame

Binocular Loupe 4.5x with Large Frame

Features

Pocket Doppler
With LCD Display
With Built in speaker
Blue Backlight
Two FHR Modes: Real Time and Average
Audio output can be connected to Recorder
Automatic Switch OFF Function
Battery Energy Level Indication

Main Unit with 2.5/2.0 MHz Probe
Rechargeable Batteries (1.2V X 3)
Charger
Service Manual

Fiber Optic Light Cable

Advanced proprietary optical fibers for maximum illumination. Stainless steel end fittings available to fit all competitive manufacturers light sources, such as Acmi, Wolf, Karl Storz, Pentax and Olympus. Durable silicone sheathing insures maximum flexibility while reducing the weight completely Autoclaved.

Features

Strain relieved by Kevler and protected by silicone hose. Steam Autoclavable with warranty.
Light source end temperature resistant up to 300 Deg.
Stainless Steel adopter enables our cables to be used with other manufactures light source.

Cable 3.5mm and 180cm Length

Cable 3.5mm and 225cm Length

Cable 4.5mm and 180cm Length

Cable 4.5mm and 225cm Length

Fiber Optic General Headlight

Focusing Model: Large Spot Light and further fine focusing sleeve, useful for bigger surgical area like plastic surgery, orthopedic surgery, cardiac surgery etc.

Features

Soft, flexible headband with a ratchet on the top and back for superior comfort and customized fit.

Fiber optic bundle is encased in three layers of protective materials to prevent fiber breakage and reduce costs

Fiber Optic Light Source Halogen

Compact, Lightweight, powerful light source for Medical use. The light is equipped with a 250w halogen bulb. A low noise fan positioned right side of the halogen bulb provides the necessary cooling inside the metallic structure of the light source.

Specification
Available with single/double outlet, Cable adapter is suitable for KARL-STORZ Cable fitting.
For other makes adapter is available separately.
Brilliant Halogen illumination 24V-250W.
In-built heat filter with extra white light

Light Source One Bulb 15v 150w
Light Source Twin Bulb 15v 150w
Light Source One Bulb 24v 250w
Light Source Twin Bulb 24v 250w

Fiber Optic ENT Headlight

State of the art Single optical systems concentrate and focuses the brightest white light available virtually shadow free. Fiber optic Headlight is available with a variable 5-80mm light spot or with a fixed 80mm light spot at a 16 distance. At 19.5 the spot size is 100 mm for fixed or variable type headlight.

Features

Soft, flexible headband with a ratchet on the top and back for superior comfort and customized fit.

Fiber optic bundle is encased in three layers of protective materials to prevent fiber breakage and reduce costs.

Laryngoscope Fiber Optic LED

Complete lineup of Mac, Miller and Pediatric oxygen blades, Much faster, precise and easy to replace Fiber optic light carrier, Superior design product of in-house research and development, Stainless Steel parts. Incomparable Cold, Bright White, Xenon Bulb Handle. Blades and Handles According to ISO and ASTM Fiber Optic Standards.

Set complete with 4 Blades and One Handle in Plastic Presentation Case.

Specifications

Full Stainless Steel Blade and Handle. Extra Quartz Glass Fibers for Maximum Light.

Incomparable Cold, Bright White LED Light Handle. Stainless Steel Autoclavable Fiber Optic Blades and Light Guides. All Blades are CE marked and Fit onto others compatible Handles.

Operating Microscopes for EYE, ENT, Neurosurgery, Gynecology, Plastic Surgery

AB Series of Operating Microscopes of quality reliable product that will give you good MAGNIFICATIONS, ILLUMINATION and DEPTH. The Microscope provides sharp image resolution with high intensity coaxial illumination for a wide range of surgical procedures including EYE, ENT, Neurosurgery, Gynecology, Plastic Surgery as well as Extra Capsular Cataract Extraction and Lens implantation besides advanced diagnostic applications.

1. Digital One Channel ECG Machine

2. Simultaneous 12 leads acquisition

3. Multiple operation mode (Manual /Auto/Ref. lead)

4. LCD to display operation status and wave-form

5. The wave-form is displaying synchronously on the LCD with 195 X65 dots

6. AC/DC power, Built in rechargeable Ni-MH battery

7. High resolution thermal printing array system

8. High frequency response reach to 150Hz

9. Capable of printing continuous one channel trace and annotations including lead mark and such
parameters as sensitivity, paper speed, and filter operation status

10. High resolution digital inhibits baseline

11. One-touch operation able to enhance efficiency and relieve operation strain.

12. Concept of floating input circuit meets IEC safety standard.

13. Visual status due to light indicated touch-keys.

14. Rechargeable battery supporting more than 50 patient examinations.

15. Under the automatic mode, pressing key MODE continuously can keep recording when abnormal lead is found.

16. Safety level corresponds to Class I, Type CF.

The DMS-800 provides a comprehensive set of essential vital signs, including SpO2, Pulse Rate, EKG, NIBP, EtCO2, Respiration, temperature & invasive Blood pressure and is able to customize customers need upon request.

The device displays the waveforms as well as store data in horizon trends that can identify the changes in patients physiological condition. Its replaceable and rechargeable battery life is continuously at least 3-4 hrs. no need to worry about power supplying during outdoor monitoring or emergency transportation.

Its lightweight design , intuitive menu and easy operation provide a user friendly interface and ideally apply for Hospitals, clinics, Ambulance, First Aid Support and Military System.

DMS-660P is a portable multifunctional Capnography monitor providing SpO2, Pulse, EtCO2, Respiration with accuracy and reliable performance.
Light Weight and Compact Design
Backlit large LCD display with efficient power consumption
SpO2 Waveform Display
72 hours memory with Trend function
Real time display the physiological values
AC/DC selectable
Built-in charger
Connect to PC via USB interface
Compatible with Smart Link Software for patients data analysis and management on PC

OPTIONAL SOFTWARE
1. Diagnosis of Sleep Apnea and Disorders
2. Analysis and management of patient data
3. Statistics of the SpO2 / Pulse distribution
4. Analysis of the physiological curves
5. Connect to PC by USB

DMS-660P is a portable multifunctional Capnography monitor providing SpO2, Pulse, EtCO2, Respiration with accuracy and reliable performance.
Light Weight and Compact Design
Backlit large LCD display with efficient power consumption
SpO2 Waveform Display
72 hours memory with Trend function
Real time display the physiological values
AC/DC selectable
Built-in charger
Connect to PC via USB interface
Compatible with Smart Link Software for patients data analysis and management on PC

OPTIONAL SOFTWARE
1. Diagnosis of Sleep Apnea and Disorders
2. Analysis and management of patient data
3. Statistics of the SpO2 / Pulse distribution
4. Analysis of the physiological curves
5. Connect to PC by USB

Specifications
Parameters
5-part differentiation, 25 parameters
WBC, Neu#, Lym#, Mon#, Eos#, Bas#, Neu%, Lym%, Mon%, Eos%,
Bas%, RBC, HGB, HCT, MCV, MCH, MCHC, RDW, PLT, MPV, PCT,
PDW, RETLC#, RETLC%, IRF

Principle
WBC Analysis: Optical and Impedance measurements
RBC/PLT Analysis: Impedance method
HGB test: Cyanide-free reagent colormetry

Throughput: Up to 80 samples per hour

Large storage: More than 100, 000 samples

Sampling modes: Open mode, Sample loader mode

Power requirement: 100240VAC, 50/60HZ

Sampling modes:Pre-diluted 40L
Manual mode(Open sampling) 200 L
Auto loader 240 LL

Features
Laser light multi-dimensional cell classification
Double mode for WBC counting (Impedance Count and Optical Count)
Resistant RBC mode
Powerful data management
Auto-calibration procedure
Walk-away automation, high efficiency and accuracy

Technical Data
Parameters: pH, Nitrite, Specific Gravity, Ascorbic Acid, Blood, Glucose, Bilirubin, Urobilinogen,
Ketone, Leucocytes, Protein, Calcinm, Creatinine, Microalbumin
Principle: dual-wavelength reflectance photometry
Two test modes: Normal mode, 60 samples/hour , Continuous mode, 120 samples/hour
Memory capacity:1000 results
Strip: Uritest 10A/11A urine reagent strips
Dimension: 290mm x 200mm x 100mm

Features & Functions
Cold light source facility with long life and high stability
12V DC power supply by the adapter
Built-in thermal printer & port for an external printer
Two test modes and speeds for selection
Data transfer capability via RS232 port
Barcode reader optional

Microalbumin
Forecast the diabetic nephropathy and early detection
Reach the sensitivity of 50mg/L with the 85% accuracy
The best supplement for the test of protein

sample: 10l whole blood, 20l pre-diluent reagent: 0.4ml lytic reagent, 40ml diluent and 18ml detergent per test throughput: up to 30 samples per hour data storage: 2000 sample results with histograms display: 5.5 inches lcd, resolution 320x240 dimension: 430mmx260mmx420mm n.w.: 14.5kgs power requirement: ac 100v --- 240v, 5060hz inputoutput: system keyboard, thermal recorder, external printer lq850 or similar model (optional), rs232 to computer

We are the main supplier of this product.

Environmental conditions
Temperature: 15 - 30 C (59 - 86F)
Humidity: 15 - 75% RH
Rate of change of temperature: 0.5C/minute (0.9F

Regulatory
510K K051494 FDA Approval
CE
Device Directive 93/42 EC for class 1 Device

Floor to Wall column with a counterbalanced travel of the X-Ray Tube head arm .
Suitable for X-Ray Rooms having less space, low height .
Can be configured to have an output of: 100 kVp, 60 mA and 100kVp, 100mA.

GENERATOR SPECIFICATIONS

TheEco-Diagnoste-100is aFULLWAVE RECTIFIEDsystem & delivers an excellent radiographic output of:

100 mA from 40 to 80 KV for 0.4 secs. ( 40 mAs )
80 mA from 40 to 90 KV for 0.8 secs. ( 64 mAs )
60 mA from 40 to 100 KV for 2.0 secs. (120 mAs)
40 mA from 40 to 100 KV for 5.0 secs. (200 mAs)

Input :230 VAC, 15 Amp., 50Hz.
Timer :0.04 to 5.0 secs. 23 steps.

Floor to Ceiling column with a counterbalanced travel of the X-Ray Tube head arm .
TheBasic Diagnostic Systemcan be configured with an output of 100kVp, 100mA i.e.Basic-Diagnoste-100 & Basic- Diagnoste-300 ( 125kVp, 300mA).

GENERATOR SPECIFICATIONS

100 mA from 40 to 80 KV for 0.4 secs. ( 40 mAs )
80 mA from 40 to 90 KV for 0.8 secs. ( 64 mAs )
60 mA from 40 to 100 KV for 2.0 secs. (120 mAs)
40 mA from 40 to 100 KV for 5.0 secs. (200 mAs)

Input :230 Volts, 15 Amp.
Timer :0.04 to 5.0 secs. 23 steps.

GENERATOR SPECIFICATIONS : Basic-Diagnoste-300
GeneratorDiagnoste- 300delivers the excellent radiographic output as given below :

RADIOGRAPHY LARGE FOCUS :
300 mA from 40 to 90 kV from 0.02 to 0.4 secs. ( 120 mAs )
200 mA from 40 to 100 kV from 0.02 to 1.3 secs. ( 260 mAs )
100 mA from 40 to 125 kV from 0.02 to 3.0 secs ( 300 mAs )

RADIOGRAPHY SMALL FOCUS :
150 mA from 40 to 90 kV from 0.02 to 2.0 secs. ( 300mAs )
100 mA from 40 to 100 kV from 0.02 to 5.0 secs. ( 500 mAs )
50 mA from 40 to 125 kV from 0.02 to 5.0 secs .( 250 mAs )

Input voltage: 440VAC, 3 phase, 30KVA
Timer : 0.02 to 5.0 Secs. 23 Steps.

Product description
We provide various high power generator models ranging from 16kW to 80kW for both radiographic and fluoroscopic systems. Superior power conversion efficiency and newly designed high-tension transformer accomplish stable output of x-rays with minimal ripples, lower patient radiation dose and more vivid and accurate radiographic images compared with traditional single-phase full wave type generators. Its excellent output efficiency and compact sized designs enhance economic use of space and cost saving. It is equipped with user-friendly operation panels and system software operating on anatomical programmer configurations. Customized powers and functions that meet your requirements will be offered .

Product specification/models
Standard Features
High power, high frequency generator adopting phase-shift pulse width modulation
Precise mA and kVp feedback control
High-speed rotor control with rapid response
Programmed calibration satisfying specification of various X-ray tubes and cable length
System check program with error code display improving fast fault detection
One-year warranty service
Convenient interface module helps easy configuration of X-ray system

Operation Panel
APR settings over 500 views
Automatic settings of optimal technical conditions for the best images
Select on state of art anatomical graphics with touch screen (Network version)
Manual storage of APR and system data by operator
User-friendly operation console and data display

Other Functions
Input Power
AC 200V/ 220V/ 240V-SINGLE PHASE
AC380V/400V/440V/480V- THREE PHASE

AEC Selection (Option)
High precision of "exposure time mode selection" and "mAs mode selection".
Use three-field iron chamber or photo detector
Film/screen speed combination selection

ABC Selection (Option)
In Fluoroscopy mode, Fluoro Pulse rate selection function.

Abc Selection (Option)
Computer based operation panel enables easy selection and operation of various APR data as well as the search and storing the best conditions for exposures.

1. 1/4 CMOS 2, 000, 000pixels (2MPixels)
2. High resolution, High sensitivity, High performance
3. DSP 10bits
4. Compact Size, Easy to use and focus
5. Reliable light source with 6 pieces of white light LED
6. Display amazing clear images in two different viewing modes: Live and Freeze
7. Power Supply: None needed, powered through USB cable
8. Effective Pixels ( H x V ): 1200*1600

Accessory:(Intra oral cameras cable*1, sheaths*50, CF disk *1)

Available in two types:( 1) Using CFL Lamp (2) Using LEDs.

Model Exslim(using CFL Lamp)
Extra slim casing, attractive design with uniform illumination.
Very Light weight body made of Acrylic therefore safe for the doctors as it is electrically Non Conductive.
Long Life, reliable.

LED X-Ray Viewers: ModelExslim-L
Very Slim casing
Better illumination (more uniform) than CFL Lamps or any other Lamp.
Very long Life and more reliable than Lamps.

Low electricity consumption & Eco friendly.

This is our most popular mobile protective barrier. Powder coated steel frames for years of trouble free service completely enclosing the leaded glass panel for increased durability and safety. 2.00mm lead equivalent optically clear lead glass to prevent shattering. 1.5mm lead equivalent opaque base covered in for easy cleaning and durability. Exclusive 1.5mm lead equivalent floor drape, the only barrier made with complete head to toe protection. 4 hospital grade casters, two with locks for ease of movement and positive positioning.

0.5mm lead equivalent protection.
Hook n Loop Closure.
Will fit up to a 20" neck size.
Available loose or tethered to apron.

Direct Halogen Spot Light

Very attractive state of the art examination light with optimal halogen illumination 12v 50w suitable for operations in offices of Gynecologists and dentists and for diagnosis in other medical fields. The focusing lens at the instruments head allows adjusting the size of the Illuminated examination field. The light intensity can be adjusted by means of the rheostat.
The highly flexible special arm can be moved in all directions and remains in the requested Position. The examination light is available as desk model, wall model or floor model with mobile steel stand (Iron cast base), black powder coated. The practical universal clamp Allows attaching the desk model also to beds or rails in hospitals.

Halogen Spot Light with Floor Stand
Halogen Spot Light with Table Stand
Halogen Spot Light with Wall Mount

Mini Examination Light

Very attractive state of the art examination light with optimal Halogen illumination 6v 20w suitable for operations in offices of gynecologists and dentists and for diagnosis in othermedical fields. The light intensity can be adjusted by means of the rheostat.

Specification
Halogen Exam Light with 6v 20w Lamp
Compact and very Light weight Hand Held Exam Light.
Variable light intensity.

Binocular Loupe

Binocular Loupe integral with precision Optics with exceptionally lightweight
They are perfect for many applications. General Medicine, Dermatology, General-, Plastic
and Neurosurgery, ENT, Ophthalmology, Veterinary and Dental Medicineetc

Binocular Loupe 3.5x with Small Frame

Binocular Loupe 3.5x with Large Frame

Binocular Loupe 4.5x with Small Frame

Binocular Loupe 4.5x with Large Frame

Features

Pocket Doppler
With LCD Display
With Built in speaker
Blue Backlight
Two FHR Modes: Real Time and Average
Audio output can be connected to Recorder
Automatic Switch OFF Function
Battery Energy Level Indication

Main Unit with 2.5/2.0 MHz Probe
Rechargeable Batteries (1.2V X 3)
Charger
Service Manual

Fiber Optic Light Cable

Advanced proprietary optical fibers for maximum illumination. Stainless steel end fittings available to fit all competitive manufacturers light sources, such as Acmi, Wolf, Karl Storz, Pentax and Olympus. Durable silicone sheathing insures maximum flexibility while reducing the weight completely Autoclaved.

Features

Strain relieved by Kevler and protected by silicone hose. Steam Autoclavable with warranty.
Light source end temperature resistant up to 300 Deg.
Stainless Steel adopter enables our cables to be used with other manufactures light source.

Cable 3.5mm and 180cm Length

Cable 3.5mm and 225cm Length

Cable 4.5mm and 180cm Length

Cable 4.5mm and 225cm Length

Fiber Optic General Headlight

Focusing Model: Large Spot Light and further fine focusing sleeve, useful for bigger surgical area like plastic surgery, orthopedic surgery, cardiac surgery etc.

Features

Soft, flexible headband with a ratchet on the top and back for superior comfort and customized fit.

Fiber optic bundle is encased in three layers of protective materials to prevent fiber breakage and reduce costs

Fiber Optic Light Source Halogen

Compact, Lightweight, powerful light source for Medical use. The light is equipped with a 250w halogen bulb. A low noise fan positioned right side of the halogen bulb provides the necessary cooling inside the metallic structure of the light source.

Specification
Available with single/double outlet, Cable adapter is suitable for KARL-STORZ Cable fitting.
For other makes adapter is available separately.
Brilliant Halogen illumination 24V-250W.
In-built heat filter with extra white light

Light Source One Bulb 15v 150w
Light Source Twin Bulb 15v 150w
Light Source One Bulb 24v 250w
Light Source Twin Bulb 24v 250w

Fiber Optic ENT Headlight

State of the art Single optical systems concentrate and focuses the brightest white light available virtually shadow free. Fiber optic Headlight is available with a variable 5-80mm light spot or with a fixed 80mm light spot at a 16 distance. At 19.5 the spot size is 100 mm for fixed or variable type headlight.

Features

Soft, flexible headband with a ratchet on the top and back for superior comfort and customized fit.

Fiber optic bundle is encased in three layers of protective materials to prevent fiber breakage and reduce costs.

Laryngoscope Fiber Optic LED

Complete lineup of Mac, Miller and Pediatric oxygen blades, Much faster, precise and easy to replace Fiber optic light carrier, Superior design product of in-house research and development, Stainless Steel parts. Incomparable Cold, Bright White, Xenon Bulb Handle. Blades and Handles According to ISO and ASTM Fiber Optic Standards.

Set complete with 4 Blades and One Handle in Plastic Presentation Case.

Specifications

Full Stainless Steel Blade and Handle. Extra Quartz Glass Fibers for Maximum Light.

Incomparable Cold, Bright White LED Light Handle. Stainless Steel Autoclavable Fiber Optic Blades and Light Guides. All Blades are CE marked and Fit onto others compatible Handles.

Operating Microscopes for EYE, ENT, Neurosurgery, Gynecology, Plastic Surgery

AB Series of Operating Microscopes of quality reliable product that will give you good MAGNIFICATIONS, ILLUMINATION and DEPTH. The Microscope provides sharp image resolution with high intensity coaxial illumination for a wide range of surgical procedures including EYE, ENT, Neurosurgery, Gynecology, Plastic Surgery as well as Extra Capsular Cataract Extraction and Lens implantation besides advanced diagnostic applications.

1. Digital One Channel ECG Machine

2. Simultaneous 12 leads acquisition

3. Multiple operation mode (Manual /Auto/Ref. lead)

4. LCD to display operation status and wave-form

5. The wave-form is displaying synchronously on the LCD with 195 X65 dots

6. AC/DC power, Built in rechargeable Ni-MH battery

7. High resolution thermal printing array system

8. High frequency response reach to 150Hz

9. Capable of printing continuous one channel trace and annotations including lead mark and such
parameters as sensitivity, paper speed, and filter operation status

10. High resolution digital inhibits baseline

11. One-touch operation able to enhance efficiency and relieve operation strain.

12. Concept of floating input circuit meets IEC safety standard.

13. Visual status due to light indicated touch-keys.

14. Rechargeable battery supporting more than 50 patient examinations.

15. Under the automatic mode, pressing key MODE continuously can keep recording when abnormal lead is found.

16. Safety level corresponds to Class I, Type CF.

The DMS-800 provides a comprehensive set of essential vital signs, including SpO2, Pulse Rate, EKG, NIBP, EtCO2, Respiration, temperature & invasive Blood pressure and is able to customize customers need upon request.

The device displays the waveforms as well as store data in horizon trends that can identify the changes in patients physiological condition. Its replaceable and rechargeable battery life is continuously at least 3-4 hrs. no need to worry about power supplying during outdoor monitoring or emergency transportation.

Its lightweight design , intuitive menu and easy operation provide a user friendly interface and ideally apply for Hospitals, clinics, Ambulance, First Aid Support and Military System.

DMS-660P is a portable multifunctional Capnography monitor providing SpO2, Pulse, EtCO2, Respiration with accuracy and reliable performance.
Light Weight and Compact Design
Backlit large LCD display with efficient power consumption
SpO2 Waveform Display
72 hours memory with Trend function
Real time display the physiological values
AC/DC selectable
Built-in charger
Connect to PC via USB interface
Compatible with Smart Link Software for patients data analysis and management on PC

OPTIONAL SOFTWARE
1. Diagnosis of Sleep Apnea and Disorders
2. Analysis and management of patient data
3. Statistics of the SpO2 / Pulse distribution
4. Analysis of the physiological curves
5. Connect to PC by USB

DMS-660P is a portable multifunctional Capnography monitor providing SpO2, Pulse, EtCO2, Respiration with accuracy and reliable performance.
Light Weight and Compact Design
Backlit large LCD display with efficient power consumption
SpO2 Waveform Display
72 hours memory with Trend function
Real time display the physiological values
AC/DC selectable
Built-in charger
Connect to PC via USB interface
Compatible with Smart Link Software for patients data analysis and management on PC

OPTIONAL SOFTWARE
1. Diagnosis of Sleep Apnea and Disorders
2. Analysis and management of patient data
3. Statistics of the SpO2 / Pulse distribution
4. Analysis of the physiological curves
5. Connect to PC by USB

Specifications
Parameters
5-part differentiation, 25 parameters
WBC, Neu#, Lym#, Mon#, Eos#, Bas#, Neu%, Lym%, Mon%, Eos%,
Bas%, RBC, HGB, HCT, MCV, MCH, MCHC, RDW, PLT, MPV, PCT,
PDW, RETLC#, RETLC%, IRF

Principle
WBC Analysis: Optical and Impedance measurements
RBC/PLT Analysis: Impedance method
HGB test: Cyanide-free reagent colormetry

Throughput: Up to 80 samples per hour

Large storage: More than 100, 000 samples

Sampling modes: Open mode, Sample loader mode

Power requirement: 100240VAC, 50/60HZ

Sampling modes:Pre-diluted 40L
Manual mode(Open sampling) 200 L
Auto loader 240 LL

Features
Laser light multi-dimensional cell classification
Double mode for WBC counting (Impedance Count and Optical Count)
Resistant RBC mode
Powerful data management
Auto-calibration procedure
Walk-away automation, high efficiency and accuracy

Technical Data
Parameters: pH, Nitrite, Specific Gravity, Ascorbic Acid, Blood, Glucose, Bilirubin, Urobilinogen,
Ketone, Leucocytes, Protein, Calcinm, Creatinine, Microalbumin
Principle: dual-wavelength reflectance photometry
Two test modes: Normal mode, 60 samples/hour , Continuous mode, 120 samples/hour
Memory capacity:1000 results
Strip: Uritest 10A/11A urine reagent strips
Dimension: 290mm x 200mm x 100mm

Features & Functions
Cold light source facility with long life and high stability
12V DC power supply by the adapter
Built-in thermal printer & port for an external printer
Two test modes and speeds for selection
Data transfer capability via RS232 port
Barcode reader optional

Microalbumin
Forecast the diabetic nephropathy and early detection
Reach the sensitivity of 50mg/L with the 85% accuracy
The best supplement for the test of protein

sample: 10l whole blood, 20l pre-diluent reagent: 0.4ml lytic reagent, 40ml diluent and 18ml detergent per test throughput: up to 30 samples per hour data storage: 2000 sample results with histograms display: 5.5 inches lcd, resolution 320x240 dimension: 430mmx260mmx420mm n.w.: 14.5kgs power requirement: ac 100v --- 240v, 5060hz inputoutput: system keyboard, thermal recorder, external printer lq850 or similar model (optional), rs232 to computer

We are the main supplier of this product.