By this machine intimate & homogenous mixing of products is employed by planetary motion of beaters and centrally located homogeniser.

Equipment ideally suitable for thorough mixing of ointments, creams, lotions, toothpastes, pharmaceutical creams, cosmetic creams, ceramics, colour pigments, ink pastes, compounds, adhesives etc. in sterile and non-sterile conditions.

Product Container is provided with jacket to heat and cool for circulation of steam / cold water. Mixer is also designed to operate under vacuum to to remove air entrapment in the product during mixing.

Also the High speed disperser suitable for homogenizing the product with independent drive at the centre of the top dish

• Suitable to different capacities I.P.C.s


• cGMP construction.


• Designed for continuous operation at safe working load.


• Projection of lifting arm shall be as per client's requirement.


• Available in mobile as well as Fixed positioned unit to suit the site condition.


• Hydraulically powered lifting / lowering movement.


• 270 Deg. Swivel arc with position lock on the base.


• Hose burst check valve will not allow the lifted load to come down, in case of hose pipe leakage or failure.


• Safety limit switches for maximum up & down movement control.


• Controlled travel speed avoids vibrations and increases operator safety.

• Suitable to different capacities of FBD Bowl.


• cGMP construction.


• Designed for continuous operation at safe working load.


• Projection of lifting arm shall be as per clients requirement.


• Available in mobile as well as Fixed positioned unit to suit the site condition.


• Hydraulically powered lifting / lowering movement.


• Hose burst check valve will not allow the lifted load to come down, in case of hose pipe leakage or failure.


• Safety limit switches for maximum up & down movement control.


• Controlled travel speed avoids vibrations and increases operator safety.


• Limit switches for up & down movement.


• Limit switches for stopping the cone in 0 degree & 180 degree.


• Dust free operation.

Contra Rotary Mixer is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity.

Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections

Triglyceride emulsifiers need to be heated up for the reaction. This can be done in different heat exchanger types.

The most efficient way is to use multi tube heat exchangers with static mixing elements inside the pipes. In comparison to empty tube heat exchangers, the operating time between services when using static mixing elements could be considerably extended.

Due to the continuous mixing during the heating stage the reaction could also be improved and the processing time reduced

Distillation columns are one of the most commonly used thermal separation units and have been used for many centuries.

Their operation is based on the difference in boiling temperatures of the liquid mixture components, and on recycling counter-current gas-liquid flow.

The properly organized temperature distribution up the column results in different mixture compositions at different heights.

While multi-component is a common phenomenon for all column types, the flow regimes are very different depending on the internal elements used.

The two main types are a tray column and a packed column, the latter equipped with either random or structured packing.

Different types of distillation columns are used for different processes, depending on the desired liquid holdup, capacity (flow rates), pressure drop etc, but each column is a complex unit, combining many structural elements.