Diamond Building Care Ltd

Andheri East, Mumbai, Maharashtra

Terroza Putty is water resistant white cement based putty for cement, plaster walls & ceilings. Terroza Putty can be applied even on moist surfaces (Internal / External).

It has more adhesive strength, durability & increases the life of paints. Terroza Putty though white cement based, does not require water curing. It renders a smooth & durable surface suitable for all kinds of paints.

Application Procedure

Surface preparationRemove all the loose adhering material from the wall surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quality of clean water.

Mixing of Terroza PuttyMix Terroza Putty with 35-40% clean water slowly to make a paste. Continue the mixing of material for 10-15 minutes till a uniform paste is formed. It is readymade wall putty for which no primer is required.

Application on surfaceApply first coat of Terroza Putty uniformly on already moistened surface with the help of putty blade or trowel. Allow the surface to dry for at least three hours and then apply a second coat of putty. Leave the surface to dry completely. Always prepare the required quantity of Terroza Putty and use it within three hours of mixing with water. The total thickness of both the coats should be limited to a maximum of 1.5 mm. After complete drying of the surface, if needed, the surface should be rubbed with fine waterproof emery paper. The surface is now ready for painting.

Precautions while usingThough it contains only non toxic materials still care should be taken to avoid dust inhalation while mixing and handling. in case of contact with eyes or mouth, wash with plenty of water.

Keep it in dry place and out of reach of children.

StorageTerroza Putty should be stored in a dry place.

PackingTerroza Putty is available in 20 Kg & 40 Kg. Packs.

Note:The information given in this Leaflet is for general guidance only. Specific instructions for various site conditions can be provided on demand. However the company will not be responsible for any wrong application of the product