Diatax Corpn.

Shalimar Bagh, delhi

Oil seals are rotary shaft seals that close a gap between stationary and moving components and prevent lubricant to escape and thus stop contamination through the clearance. There are different types of oil seals that fit a different application and surroundings and are made out of different materials. The right material and type of oil seal is determined by the application and the medium that will be used with the oil seal.

Brand: Diatax

Applications : Automotive, Hydraulic, Pneumatic and many others.

Size Range - 5mm To 700mm

We manufacture Various Types of Oil seals - TC, SC, TB, SB.

Availability:

Nitrile

EPDM

Neoprene

Viton

Urethane

Natural Rubber

Aflas

Fluoroelastomer (FKM)

Butyl

Styrene Butadiene (SBR)

Silicone Hydrogenated Nitrile (HNBR)

diatax is manufacturing more than for 1, 00, 000 different types and sizes of rubber orings and seals with more than 2500 molds in store

diatax - orings

an o-rings is a torus shaped seal placed between two parts to prevent the passing of fluids and gasses. it is an efficient sealing element for both static and dynamic applications. in industries from aerosol to aerospace, o-rings are the most commonly used seals in the world. why? because they are effective, economical, and easy to use.

although the o-ring is a simple sealing concept, there are many factors to take into account when selecting the right o-ring for a specific application. our o-ring technical handbook explains the factors involved when selecting the right o-ring.

diatax manufactures o-rings according to or any custom size/tolerance required. o-rings are also available in accordance with different standards(as 568a, din 3701, bs 1806/ bs 4518, jis b2401, jis nft47-501, sms 1568 and iso 3601) and with various approvals.

expertise - manufacturing and materials

with the right selection of material an o-ring can be used in a varied media such as: gas, fuel, chemical, water, lubricants etc.

other than the standard sizes, isg is able to offer o-rings in non-standard sizes as per the customer requirement & application.

diatax can offer o-rings various polymers some of which are below

nitrile (nbr)

fkm (viton)

silicone (vmq)

neoprene (cr)

epdm

hnbr

fluorosilicone (fvmq)

perfluoroelastomer (ffkm)

aflas (tfe/p)

o-rings in all above material can be produced in regular hardness ( 70 / 75 / 90 ) shore a and customised hardness as well.

with a very sound compounding knowledge we can produce orings in various other hardness as per customer & application requirements.