Thane, Maharashtra, India
Verified
Add Review
Our Products
Fiber Laser Cutting Machine with Exchangable Pallet
Widely applied to metal- sheet Processing, stainless steel decorative engineering, advertising trademark and advertising character, high/low voltage electrical cabinet, kitchenware, metal craftwork, Autoparts, farm machinery, medical instrument, sports equipment, environmental protection equipments, central air conditioning, hardware, tool and gauge etc.
| Model | SP2-315T | SP2-400T | SP2-500T | SP2-630T | ||
| Nominal Force | kN | 3150 | 4000 | 5000 | 6300 | |
| Nominal Stroke | mm | 8 | 10 | 10 | 10 | |
| Slide Stroke | mm | 280 | 280 | 280 | 280 | |
| SPM | Fixed | min-1 | 25 | 20 | 18 | 18 |
| Varoanle (Optional) | 20-30 | 18-25 | 15-20 | / | ||
| Max Die Height | mm | 600 | 650 | 700 | 800 | |
| Die Height Adjustment | mm | 120 | 120 | 120 | 120 | |
| Bolster Area (FB×LR) | mm | 1000×2400 | 1100×2500 | 1200×2900 | 1300×3000 | |
| Bolster Thickness | mm | 190 | 200 | 210 | 220 | |
| Slide Area (F·B×L·R) | mm | 900×2100 | 1000×2200 | 1100×2600 | 1200×2800 | |
| Shank Hole (Dia.×Depth) | mm | 3-φ70×95 | 3-φ70×95 | 3-φ80×100 | 3-φ80×100 | |
| Side Opening (F·B×H) | mm | 900×500 | 1020×550 | 1040×600 | 1200×700 | |
| Between Columns | mm | 2600 | 2700 | 3100 | 3300 | |
| Distance Between Bolster Surface & Floor | mm | 1120 | 1120 | 1150 | 1160 | |
| Main Motor Power | KW | 37 | 45 | 55 | 90 | |
| Outline Dimension (F·B×L·R×H) | mm | 3420×3500×4665 | 3620×3620×4650 | 4100×4060×4900 | 4100×4250×5800 | |
| (Above Ground) | ||||||
| Net Weight | Kg | 47000 | 51000 | 67500 | 95000 | |
A cylinder can be rolled, including the pre-bending of both ends, feeding the plate forward through the rolls, one time only. The operator should find only one position for each side roll, to get the part finished which is supported by permanent lubrication technology (bearing life period without refueling).
The 4 roller bending machine is widely used in petroleum, chemical industry, cement, boiler, shipbuilding, aviation, water conservancy, power transmission towers, etc. Its working principle is rotating bending deformation. Safety devices are in compliance with European regulations. CE mark.
The cutting beam of hydraulic guillotine shear has been designed in inner-inclined structure with adjustable cutting angle and blade gap. The upper beam is able to move on the linear guide under the push of cylinder, to realize the shearing action.
DISHAA manufactures a hydraulic swing beam shear for cutting of sheet metal with thicknesses between 4mm and 6000mm.
This universal drilling machine is a square column type drilling machine. It is mainly used for counter-sinking, spot-facing, drilling, tapping, boring, reaming etc.
Horizontal Milling Machines have a spindle or cutters mounted on a horizontal arbor above an X-Y table. Horizontal mills are optimal for machining heavier pieces because the cutters have support from the arbor, as well as a bigger cross-section area than a vertical mill. The design of the horizontal milling machine allows for the rapid removal of material off of the piece one is machining. These types of milling machines can range in size from something small enough to fit on a tabletop to room-sized machines
Vertical Milling Machines have a spindle that moves in a vertical orientation over the table, working on the top and bottom sides of the object being machined. Vertical milling machines lend themselves to standing machinists and detailed work. These machines tend to be taller than they are wide since their operation is vertical, which works well when dealing with die sinking. Die sinking is when a cavity of a particular size and shape is machined into a steel block. The opening can then be used for molding plastic or for forging, coining, or die-casting.
| Model | OCP-25T | OCP-45T | OCP-63T | OCP-80T | OCP-110T | OCP-125T | ||
| Nominal Force | kN | 250 | 450 | 630 | 800 | 1100 | 1250 | |
| Nominal Stroke | mm | 3 | 4 | 4 | 5 | 6 | 6 | |
| Slide Stroke | mm | 80 | 100 | 120 | 140 | 160 | 160 | |
| SPM | Fixed (Optional) | min-1 | 100 | 80 | 70 | 60 | 50 | 50 |
| Variable | 80-120 | 70-90 | 60-80 | 50-70 | 40-60 | 40-60 | ||
| Max Die Height | mm | 250 | 270 | 300 | 320 | 350 | 350 | |
| Die Height Adjustment | mm | 50 | 60 | 80 | 80 | 80 | 80 | |
| Between Slide Center & Frame | mm | 210 | 230 | 300 | 300 | 350 | 350 | |
| Bolster Area (FB×LR) | mm | 400×700 | 440×810 | 580×900 | 590×1000 | 680×1150 | 680×1150 | |
| Bolster Thickness | mm | 80 | 110 | 110 | 120 | 140 | 140 | |
| Bed Opening (Dia./F·B×L·R) | mm | 260×250 | 300×300 | 390×460 | 390×520 | 420×540 | 420×540 | |
| Slide Area (FB×LR) | mm | 300×260 | 340×410 | 400×480 | 420×560 | 500×650 | 540×680 | |
| Shank Hole (Dia×Depth) | mm | φ40×60 | φ40×60 | φ50×80 | φ50×80 | φ60×80 | φ60×80 | |
| Between Columns | mm | 450 | 550 | 560 | 640 | 760 | 760 | |
| Main Motor Power | KW | 4 | 5.5 | 7.5 | 7.5 | 11 | 11 | |
| Outline Dimension (F·B×L·R×H) | mm | 1600×1125 | 1780×1225 | 2000×1305 | 2050×1390 | 2030×1620 | 2030×1660 | |
| ×2200 | ×2400 | ×2600 | ×2900 | ×3060 | ×3060 | |||
| Net Weight | Kg | 2600 | 3450 | 5400 | 7000 | 9840 | 10400 | |
The radial drilling machine is considered the most versatile type of drill press.The drill head of the radial drilling machine can be moved, adjusted in height, and rotated. Aside from its compact design, the radial drill press is capable of positioning its drill head to the work piece through this radial arm mechanism.The tasks that a radial drilling machine can do include boring holes, countersinking, and grinding off small particles in masonry works.
