Write a Review
Our Products
We offer the best product range of Rod to Tape Clamp, Rod to Cable Clamp, Square Tape Clamp, Oblong Clamp and Plate Type Test Clamp.
Rod to Tape Clampare made from high copper content alloy for the connection of the earthing conductor to earth rod. Corrosion resistance, conductivity and mechanical strength in clamp design is used to ensure the earthing system remains operative for many years.
| Code | Product Name | Trade Size | Conductor Size | Rod Diameter |
| 601225 | Rod To Tape Clamp | 12.7 mm | 26 X 12 mm | 1/2 " |
| 601625 | Rod To Tape Clamp | 16 mm | 26 X 12 mm | 5/8 " |
| 601631 | Rod To Tape Clamp | 16 mm | 31 X 2 mm | 5/8 " |
| 601650 | Rod To Tape Clamp | 16 mm | 51 X 8 mm | 5/8 " |
| 600020 | Rod To Tape Clamp | 20 mm | 26 X 10 mm | 3/4 " |
| 600025 | Rod To Tape Clamp | 25 mm | 26 X 12 mm | 1 " |
Rod to Cable Clampare made from high copper content alloy for the connection of the earthing conductor to earth rod. Corrosion resistance, conductivity and mechanical strength in clamp design are used to ensure the earthing system remains operative for many years.
| Code | Product Name | Thread Size | Conductor Size | Rod Diameter |
| 501635 | Rod To Cable Clamp | 9.5 mm | 6 - 35 mm² | 3/8 " |
| 501650 | Rod To Cable Clamp | 12.5 mm | 16 - 50 mm² | 1/2 " |
| 501670 | Rod To Cable Clamp | 16 mm | 16 - 70 mm² | 5/8" |
| 502095 | Rod To Cable Clamp | 20 mm | 35 -95 mm² | 3/4 " |
| 502570 | Rod To Cable Clamp | 25 mm | 70 - 120 mm² | 1 " |
| Square Tape Clampis used for the inter connection of multiple conductors or for changes of direction which insure a low resistance, corrosion resistant connection. Square Tape Clamps are used for forming straight through, cross or tee joints in tape. | ||
| Fix Using Counter Sunk Wood Screw 1.5" X No. 10. |
| Code | Product Name | Conductor Size | ||
| 300253 | Square Tape Clamp | 25 X 3 mm | ||
| 300256 | Square Tape Clamp | 25 X 6 mm | ||
| 300313 | Square Tape Clamp | 31 X 3 mm | ||
| 300316 | Square Tape Clamp | 31 X 6 mm | ||
| 300386 | Square Tape Clamp | 38 X 6 mm |
|
|
| 300503 | Square Tape Clamp | 50 X 3 mm | ||
| 300506 | Square Tape Clamp | 50 X 6 mm |
Oblong Clampis used in order to allow periodic disconnection and testing of the earth termination network, select a test clamp to be places within the run of each down conductor.
| Code | Product Name | Trade Size | Conductor Size | |
| 1600258 | Oblong Clamp | 26 X 8 mm max | 26 X 8 mm |
| Plate Type Test Clamp is used to form a disconnecting joint between the down conductor and earthing system. | ||
| There are two wall fixing holes on the bottom plate. Fix using countersunk woodscrews 1 1/2" x No. 10 and No. 10 wall plugs. | ||
| Code | Product Name | Material | Conductor Size | Rod Diameter |
| 2502615 | Plate Type Test Clamp | Copper | 26 X 15 mm |
| Square Conductor Clamp are used as four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor. |
| Code | Product Name | Trade Size | Conductor Size | Rod Diameter |
| 1300050 | Square Conductor Clamp | 50 mm² | 50 mm | |
| 1300070 | Square Conductor Clamp | 70 mm² | 70 mm | |
| 1300095 | Square Conductor Clamp | 95 mm² | 95 mm |
Square Rod Clamp are used as four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor.
| Code | Product Name | Trade Size | Conductor Size | Rod Diameter |
| 3700050 | Square Rod Clamp | 50 mm² | 50 mm | |
| 3700070 | Square Rod Clamp | 70 mm² | 70 mm | |
| 3700095 | Square Rod Clamp | 95 mm² | 95 mm |
| Tower Earth Clamp Single Plate are used for bonding copper and aluminum conductors onto steel surfaces. The clamp is fixed by drilling a hole in the steelwork and securing with the set screw provided. | ||
| Tower Earth Clamp Double Plate are used for bonding stranded copper conductors onto steel surfaces. The clamp is fixed by drilling a hole in the steelwork and securing with the set screw provided. |
| Code | Product Name | Material | Conductor Size | Rod Diameter |
| 3601670 | Tower Earth Clamp Single Plate | Copper | 16 - 70 mm² | |
| 3670120 | Tower Earth Clamp Single Plate | Aluminum | 70 - 120 mm² | |
| 3701670 | Tower Earth Clamp Double Plate | Copper | 16 - 70 mm | |
| 3770120 | Tower Earth Clamp Double Plate | Copper | 70 - 120 mm |
| Test Clamp is used for connecting flat tape to solid circular conductor, for example where the lightning protection system has been designed in 8mm copper conductor but the connection to the earth rod is made using 25 x 3mm copper tape.It will also serve for making through joints and tee connections in 8mm solid circular conductor. | ||
| Flat Test Clamp is used to connect 8 mm diameter conductor to 25x3 mm conductor. | ||
| Square Test Clamp is used for forming end to end joints. |
| Code | Product Name | Material | Conductor Size | Rod Diameter |
| 3500008 | Flat Test Clamp | Copper | 25 x 3 mm | 8 mm |
| 3500018 | Flat Test Clamp | Aluminum | 25 x 3 mm | 8 mm |
| 3500050 | Square Test Clamp | Copper | 50 mm² | |
| 3500070 | Square Test Clamp | Copper | 70 mm² | |
| 3500095 | Square Test Clamp | Copper | 95 mm² | |
Square Conductor Clamp are used as four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor.
| Code | Product Name | Trade Size | Conductor Size | Rod Diameter |
| 3201253 | Tape to Rod Square Clamp | 25 x 3 mm | 8 mm | |
| 3202253 | Tape to Rod Square Clamp | 25 x 3 mm | 8 mm | |
Divine Impex (Divine Impex)
Plot No. 4, G.I.D.C. Phase II, Dared, Jamnagar, Gujarat - 361004, India
Share us via
