• MOQ 50 kg.
• Country of OriginIndia

• MOQ 20 Kg
• Material304, 304L
• ShapeRound
• Country of OriginIndia
• Size3MM To 800

low carbon stainless steel grades are structurally weak alloys. such alloys are vulnerable to decay faster at elevated temperatures. moreover, because of the change in their chemistry,   stainless steel 304l round bars  they have lower corrosion resistance properties as well. however, the advantage of using these components is that they offer excellent weldability. the lowered content of carbon in  304l stainless steel rod  discourages sensitization of grain boundary precipitates. thus permitting the worker to get optimum results while welding components like  aisi 304l threaded bar . while the low carbon content ensures a maximized weldability prospectus because the alloy is not structurally sound, its use is limited. therefore manufacturers were able to rectify the problem by the addition of nitrogen in the alloy of  304l steel cold finished bars . nitrogen, when added to any austenitic stainless steel grade, is known to increase the stability of these alloys. the alloy also sees a notable improvement in the other characteristics. for instance, the yield strength of  astm a479 uns s30403 hex bar  has a significant improvement, so much so that it almost matches grade 304. in terms of corrosion, the alloy has improved resistance to pitting as well. similar to stainless steel 304, the  304l stainless steel welding rod  is also an economical alloy making it useful to several applications. yet, both the mechanical as well as corrosion resistance properties are of the  ss 304l bright bar  are substantially lower in comparison to either grade 316 or 316l. the preference for an  astm a276 type 304l flat bar  is in environments which are corrosive enough that they could cause intergranular corrosion of welds, especially in the haz or heat-affected zones. though the resistance to corrosion by oxidation of the  wnr 1.4306 square bar  is at a temperature of 1690°f, for both intermittent and continuous application is good, it is not recommended to use them beyond this point. this point is highly stressed upon by manufacturers of the  jis sus 304l black bar  if the said application requires resistance to corrosion in an aqueous medium.

• MOQ 50 kg
• MaterialSteel
• FinishingPolished
• ShapeRound

Low carbon stainless steel grades are structurally weak alloys. Such alloys are vulnerable to decay faster at elevated temperatures. Moreover, because of the change in their chemistry, stainless steel 304l round bars they have lower corrosion resistance properties as well. However, the advantage of using these components is that they offer excellent weld ability. The lowered content of carbon in 304l stainless steel rod discourages sensitization of grain boundary precipitates. Thus permitting the worker to get optimum results while welding components like AISI 304l threaded bar.

• MOQ 10 Kilogram
• Country of OriginIndia
• TypeRound
• MaterialDuplex Round
• Size3MM To 180 MM

Divya Steels is a leading Duplex Round Bar manufacturer and supplier. The duplex round bars are made up of a material known for the ferritic and austenitic stainless steel qualities. The  Duplex 2205 Round Bar  is the most used of duplex steel categories. There are standard duplex, super duplex and lean duplex categories in the  Duplex Stainless Steel Round Bar  grades. The 2205 is a standard duplex steel and it is used for its corrosion resistance, strength and cost effectiveness. The specifications are ASTM A276 and ASTM 479.  There are different dimensions to the  ASTM A479 Duplex Rod  based on different dimensions. The size ranges from 6mm to 120mm. The diameter ranges from 6mm to 350mm. The length of the  ASTM A276 Type 2205 Duplex Rod  ranges from 100mm to 6000mm. The finishes can range from black, bright, rough turned and matt finish. The material is made up of carbon, phosphorus, manganese, nitrogen, sulfur, silicon and 22% chromium, 4.5% nickel and 3% molybdenum in the composition. There are different forms such as the  Duplex 2205 Hex Bar , round bar, flat bar and square bars. The different shapes help serve in different application types. The square bar is used for strength and in structural applications. The  Duplex Flat Bar  is used for its low weight and it is useful for structural lattices. The corrosion resistance of the material with strength makes the bars to be used in petroleum, petrochemical, marine, power generation and in many other applications. Please contact us to get more information on the  Duplex Square Bar , other types and the prices.  

• MOQ 50 kg.
• Country of OriginIndia

• MOQ 20 Kg
• Material304, 304L
• ShapeRound
• Country of OriginIndia
• Size3MM To 800

low carbon stainless steel grades are structurally weak alloys. such alloys are vulnerable to decay faster at elevated temperatures. moreover, because of the change in their chemistry,   stainless steel 304l round bars  they have lower corrosion resistance properties as well. however, the advantage of using these components is that they offer excellent weldability. the lowered content of carbon in  304l stainless steel rod  discourages sensitization of grain boundary precipitates. thus permitting the worker to get optimum results while welding components like  aisi 304l threaded bar . while the low carbon content ensures a maximized weldability prospectus because the alloy is not structurally sound, its use is limited. therefore manufacturers were able to rectify the problem by the addition of nitrogen in the alloy of  304l steel cold finished bars . nitrogen, when added to any austenitic stainless steel grade, is known to increase the stability of these alloys. the alloy also sees a notable improvement in the other characteristics. for instance, the yield strength of  astm a479 uns s30403 hex bar  has a significant improvement, so much so that it almost matches grade 304. in terms of corrosion, the alloy has improved resistance to pitting as well. similar to stainless steel 304, the  304l stainless steel welding rod  is also an economical alloy making it useful to several applications. yet, both the mechanical as well as corrosion resistance properties are of the  ss 304l bright bar  are substantially lower in comparison to either grade 316 or 316l. the preference for an  astm a276 type 304l flat bar  is in environments which are corrosive enough that they could cause intergranular corrosion of welds, especially in the haz or heat-affected zones. though the resistance to corrosion by oxidation of the  wnr 1.4306 square bar  is at a temperature of 1690°f, for both intermittent and continuous application is good, it is not recommended to use them beyond this point. this point is highly stressed upon by manufacturers of the  jis sus 304l black bar  if the said application requires resistance to corrosion in an aqueous medium.

• MOQ 50 kg
• MaterialSteel
• FinishingPolished
• ShapeRound

Low carbon stainless steel grades are structurally weak alloys. Such alloys are vulnerable to decay faster at elevated temperatures. Moreover, because of the change in their chemistry, stainless steel 304l round bars they have lower corrosion resistance properties as well. However, the advantage of using these components is that they offer excellent weld ability. The lowered content of carbon in 304l stainless steel rod discourages sensitization of grain boundary precipitates. Thus permitting the worker to get optimum results while welding components like AISI 304l threaded bar.

• MOQ 10 Kilogram
• Country of OriginIndia
• TypeRound
• MaterialDuplex Round
• Size3MM To 180 MM

Divya Steels is a leading Duplex Round Bar manufacturer and supplier. The duplex round bars are made up of a material known for the ferritic and austenitic stainless steel qualities. The  Duplex 2205 Round Bar  is the most used of duplex steel categories. There are standard duplex, super duplex and lean duplex categories in the  Duplex Stainless Steel Round Bar  grades. The 2205 is a standard duplex steel and it is used for its corrosion resistance, strength and cost effectiveness. The specifications are ASTM A276 and ASTM 479.  There are different dimensions to the  ASTM A479 Duplex Rod  based on different dimensions. The size ranges from 6mm to 120mm. The diameter ranges from 6mm to 350mm. The length of the  ASTM A276 Type 2205 Duplex Rod  ranges from 100mm to 6000mm. The finishes can range from black, bright, rough turned and matt finish. The material is made up of carbon, phosphorus, manganese, nitrogen, sulfur, silicon and 22% chromium, 4.5% nickel and 3% molybdenum in the composition. There are different forms such as the  Duplex 2205 Hex Bar , round bar, flat bar and square bars. The different shapes help serve in different application types. The square bar is used for strength and in structural applications. The  Duplex Flat Bar  is used for its low weight and it is useful for structural lattices. The corrosion resistance of the material with strength makes the bars to be used in petroleum, petrochemical, marine, power generation and in many other applications. Please contact us to get more information on the  Duplex Square Bar , other types and the prices.