DOMAIN AUTO LINES

Mogappair, Chennai, Tamil Nadu

• Longer platform to perform Push Pull Runout.
• Double-level platform scissor lift.
• Sliding blocks adopt oil free super-wearable material.
• Double safety device : Hydraulic lock & Mechanical dual-gear safety-claw lock.
• Adopt combined anti-abrasive material roll cage.
• Adjustable second-lifting platform length.
• Pneumatic double-teeth self-locking system & the anti-explosive pipe.
• Imported hydraulic, pneumatic and electric components.
• Equipped with leveling sensor for synchronized movement of platform.

• Driven by hydraulic cylinder in stable lifting & lowering.
• Device performs stable and reliable work with anti-breaking rope safety insurance.
• Connected by using steel cables, forced synchronized movement of the lift in order to effectively prevent the sloping of the vehicle.
• Level can be well adjusted to meet the need for wheel alignment.
• Wheel free jack 2 Ton capacity.

• Flush-Mount Scissors lift, no more worries about lowered vehicles or expensive spoilers.
• Occupies smaller area.
• Electro, Hydraulic & Pneumatic systems.
• Pneumatic safeguarded.
• Lifting power is higher due to double cylinder structure.
• Easy for tyre of mount and dismount and chassis maintenance.
• This installation is very tidy and ideal for Hi-Tech workshops.

• Conforms to IS : 4553 derived from ISO 6 4 : 999.
• Measures smoke opacity of diesel vehicles in % opacity and K value.
• Measurement principle : Partial flow, optics based on folded geometry.
• Suitable for free acceleration test.
• Engine RPM measurement vibration sensor based and Battery based.
• Engine oil temperature measurement.
• Operates on 230V AC (or) 2V DC power supply.
• Portable, Compact & light weight design, suitable for Road tests using vehicle battery.
• Low & High voltage indication for battery operation.
• Automatic Zero and Span calibration.
• Automatic Pressure regulation and moisture separation.
• Handheld, Menu driven LCD remote control unit.
• Pass / Fail indication and emission limit in printout.
• Vehicle no., vehicle specification, operator name and test data in printout.
• RS232C serial port for PC interface.

• Lifting of Cars, MUVs & SUVs by Electro-Hydraulic power.
• Suitable for Lifting / Lowering of Vehicles upto 4 ton weight.
• Dual Hydraulic cylinder to ensure steady Lifting & Lowering.
• Symmetric Vertical posts for wider opening of Vehicle door.
• Universal Telescopic Asymmetric Lifting arms with 2 deck to accommodate different kinds of vehicles.
• Limit switch for automatic stopping at extreme upper positions (for Clear floor model).
• Safety mechanism using Steel rope to provide synchronous movement of both lifting arms.

• Conforms to ISO 3930.
• NDIR technology.
• Engine RPM measurement facility.
• 7 Segment LED display.
• Automatic condensate discharge.
• Automatic zero calibration.
• Digital span calibration.
• RS232C serial port for PC interface.
• NOx measurement.
• Engine oil temperature measurement.
• Portable light weight design.
• DC operation suitable for Road tests using vehicle battery.
• Display of Lambda / AFR / PEF.
• Petrol / CNG / LPG selection.
• Indication for Low / High flow.
• Indication for battery Low / High voltage.
• Electronic leak check facility.
• Gas scrubber for cleaning of impure particles.
• HC residue test.

• EPS (Expanded Polystyrene) sandwich panels, no thermo transfers between inside and outside of the booth.
• 4 ceiling light boxes (each with 336 Watts).
• Pre-filter class EU3 in Thermic group.
• Fine filter in ceiling class EU5.
• Thermic unit with double intake centrifugal fan (24 kw motor).
• Riello G10 Diesel oil burner.

• Reciprocating 3 plunger type.
• Induction motor (class of insulation B).
• Crank case lubrication splash
• V belt drive.
• Adjustment spray and Jet.
• 6 mtrs Water Hose with Gun.

Reciprocating type Air cooled compressors

• Easy to Install
• Low Noise
• Cost efficient
• Buit-in pressure switch & DOL starter
• Belt guard for safety
• Pressure release safety valves at different stages
• Two stage compression for better efficiency

• Suitable for high tensile steel & hard steel.
• This system controls the current level automatically which is not influenced by any external forces.
• The electro pneumatic regulator will control the air pressure automatically.
• A light on the machine will flash to warm of poor welding.

• Suitable for Car and LCV tyres
• Pneumatically operated tilting type vertical column
• Pneumatically operated twin cylinders for firm clamping
• Four Jaw self centering chuck
• Alloy wheel plastic protector for jaws
• Capable of handling stiff, wide and low-profile tyre
• Right help arm

• Fully Automatic machine (Recovery, Recycling, Vacuum & Recharging)
• Automatic leak test
• Ergonomically designed Chassis Easy to service
• 360 status indicator
• Robust sensor protection-Shock mounted Bigger wheels -Better maneuverability
• Foldable HMI Option for user database SW update through USB

• Suitable for Car and LCV tyres
• Wheel Rim size 10 21
• Pneumatically operated twincylinders for firm clamping
• Four Jaw self centering chuck
• Alloy wheel plastic protector

• Suitable for Cars & LCVs
• Automatic Nitrogen generator shut-off after nitrogen generation
• Two sets of large capacity CMS filter
• Two stage pre-filters for water/oil separator
• Automatic vacuum generator to extract air out from the tyre
• Automatic tyre inflation under set-up pressure
• Automatic alarm for any error and work finish
• Record last time setting data
• Audible and visual of end of nitrogen generation and inflation
• Accumulated working time for monitoring filter replacement
• N₂ purity display
• Large backlight LED for indicating pressure, time & nitrogen purity
• Equipped with independent backup system for computer
• 130 liters external N₂ tank (Optional)

• Operates by compressed air as power source (air pressure is adjustable).
• Used for riveting and punching rivets of all kinds of brake shoes brake disc brake drum brake lining brake pad.

STEAMJET is the product of 10 years of R&D designed for premium and distinctive steam car wash. Its the only machine in the world with patent technology that can spray steam and wax simultaneously. Its capable of generating high- pressure steam above 8 bar or pressure within I minute. The Wash & Wax as a single potent action forces out tiniest dust and sand particles off the car with high-pressure steam. The moisture element flows down to pick up the residues off the surface. The wax mixing device sprays warm wax to car surface leaving coating was as wipe off moisture. STEAMJET Wax lasts up to 8 times longer than conventional car wash.

Wet & Dry Vacuum Cleaner with a single stage motor reaches upto 1400w of maximum power.