Our Products
Additional features for Premium models
Reciprocating type Air cooled compressors
Power (HP) | 3 | 5 | 7.5 | 10 | 15 | 15 |
Compressor (RPM) | 975 | 710 | 975 | 710 | 943 | 943 |
Tank capacity (ltrs.) | 160 & 250 | 250 | 250 | 420 | 500 | 500 |
Working pressure (kg/cm2) | 12 | 12 | 12 | 12 | 12 | 19 |
Free Air delivery (LPM) | 263 | 390 | 536 | 781 | 1036 | 1008 |
No. of cylinders | 2 | 2 | 2 | 3 | 3 | 3 |
Power supply | 415V AC, 3 Phase, 50Hz |
Measurement parameters | Range | Resolution |
---|---|---|
Opasity | 0 – 99.9% | 0.10% |
K-value | 0 – 9.99m1 | 0.01m1 |
Linearity | ± 0.1m1 | |
Repeatability | ± 0.1m1 | |
Zero & Pan drift | ± 0.1m1 | |
Response time – physical | < 0.4 Seconds | |
Response time – Electrical | < 1 Millisecond | |
Warm-up time @25°C & above | < 7 Minutes | |
Engine RPM (Battery based) | 400 – 9990 RPM | 10 RPM |
Oil Temperature | 0 – 150°C | 1°C |
Operating temperature | +5°C to +50°C | |
Smoke Measuring cell length | 215mm (430 mm folded length) | |
Power Supply | 12V DC ±2V battery 100-265V AC, Single phase, 50-60Hz | |
Power | 300W AC / 100W DC (Without heater) |
Measurement parameters | Range | Resolution |
---|---|---|
CO (Carban Monoxide) | 0 – 15% | 0.01% |
CO2 (Carbon Dioxide) | 0 – 19.9% | 0.01% |
HC(Hydro Carbon) | 0 – 20000 PPM | 1 PPM |
O2 (Oxygen) | 0 – 25% | 0.01% |
NOx (Oxides of Nitrogen) | 0 – 5000 PPM | 1 PPM |
AFR | 0 – 30% | 0.01% |
Lambda | 0.20 to 2.00 | 0.001 |
Engine RPM (Battery based) | 400 to 9990 RPM | 10 RPM |
Engine Oil temperature | 0 – 150°C | 1°C |
Operating temperature | +5°C to +45°C | |
Measuring gas intake | 3 Litres/minute | |
Leak test | Electronic | |
Condensate discharge | Automatic | |
Response | < 15 Sec.(for Sample probe length of 3m) | |
Warm-up time @25°C & above | < 3 minute | |
Zero calibration | Automatic | |
Span calibration | Digital | |
Power Supply | 12V DC ±2V battery 100-265V AC, Single phase, 50-60Hz | |
Power | 25W |
Everything has a beginning and that is why with the new MSTART we have decided to go back to first principles: simple design, ease of assembly and a sober image but with the appeal, durability and technological features expected of a 21st century wash machine.
MSTART is a rollover designed for wash facilities with a capacity of 400 to 1200 vehicles a month and is the perfect machine for those wishing to start off in the vehicle wash business in the most profitable way.
Wet & Dry Vacuum Cleaner with a single stage motor reaches upto 1400w of maximum power.
STEAMJET is the product of 10 years of R&D designed for premium and distinctive steam car wash. Its the only machine in the world with patent technology that can spray steam and wax simultaneously. Its capable of generating high- pressure steam above 8 bar or pressure within I minute. The Wash & Wax as a single potent action forces out tiniest dust and sand particles off the car with high-pressure steam. The moisture element flows down to pick up the residues off the surface. The wax mixing device sprays warm wax to car surface leaving coating was as wipe off moisture. STEAMJET Wax lasts up to 8 times longer than conventional car wash.