Dot Technologies

Rajajinagar, Bangalore, Karnataka

Features :

• Large LCD, High contrast, wide visual angle LCD display, white backlight;
• Dual-display: Main display 80000, Vice-display 80000, Analog bar 23 segments, unit, and function, symbol complete
• 50 kinds of measuring function, With basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, TEMP, diode and Continuity measuring function etc;
• Frequency measuring can reach 80MHz;
• Standard function generator:18 kinds of frequency, 1%99% Duty cycle, 1800 pcs wave output;
• Single analyzed:(AC+DC) measuring synchronous, (AC+ Hz) measuring synchronous, (DC+ dBm) measuring synchronous, (dBm + Hz) measuring synchronous, (Hz + Duty) measuring
• synchronous, (°C + °F)displaying synchronous;
• Resistance measuring: 0.01Ω-80MΩ;
• Capacitance measuring: 10nF-100μF;
• Temperature measuring: -50°C -1372°C / 58°F -2502°F
• dBm measuring: 20pcs load Resistance choice;
• Auto data refurbish hold;
• Positive, negative peak data auto hold;
• 36 hours dynamic record: MAX, MIN, AVG, MAX-MIN;
• Relative measuring: REL Δ, Relative percent: REL%;
• 0.1%-99.9% pulse duty cycle measuring;
• Set upper limit, lower limit area measuring;
• Photo-electricity insulation RS-232 computer interface;
• Timing measuring function;
• AC measuring adopt High accuracy RMS, With measuring range and AC+DC function, can measuring the accuracy virtual value of AC by any wave.

• Auto power off
• 4 ½ Digit LCD
• Max display 19999 counts
• Large LCD display
• 1000 VDC, 750 VAC
• 20 A AC/DC, 200 MΩ,
• 20 μF, 20 K Hz
• Diode, continuity, transistor check
• Data hold
• Over Load protection
• Over Load Indication
• Polarity Indication

• Auto Range
• 3 ¾ Digit LCD
• Max display 3999 counts
• Large LCD display
• 1000 VDC, 750 VAC
• 10 A AC/DC, 40 MΩ,
• 100 μF, 400°C, 752°F
• Diode, continuity, transistor check
• Sleep mode, data hold
• Low Battery Indication

Features :

• 4 ½ digit large LCD, display with Backlight
• With the DCV, ACV, DCA, ACA, Ω, CAP, Hz, hFB, diode, & continuity test function
• Max. Voltage measuring DC 1000V or AC Value, Resolution 10μV,
• Max. Current measuring 20A, polarity automatic switch, data hold, back light
• AC measuring adopts high accuracy TRMS, with bandwidth and AC+DC measuring

• Max 6000 Counts
• True RMS ACV and ACA for accurate measurements on nonlinear signals & Over range display
• Accurate measurement of voltage and frequency on motor drive, CAT-- II 1000V / IEC 1010 Safety Standard
• 12 kinds of measuring function, with VSD, diode, hFE, duty cycle, resistance, continuity etc., Analog display, manual or auto range
• Large LCD display, white backlight, unit symbol display, very easy to read
• Relative value, max/Min value measuring, data hold
• Over load Protection Max 1000V DC / 750V AC,
• Strong antimagnetic and anti-jamming voltage performance, full function protection with anti high circuit design,