Noida, Uttar Pradesh, India
GST : 09AABCD6383R1ZV
Add Review
Our Products
The Air-cooled Scroll Chillers are highly energy efficient and are perfectly designed to work within extreme tropical weather conditions. Supported with European origin compressors, these chillers are designed, manufactured and tested in conformation with international industrial standards. The chillers are operation friendly, easy to install and backed by competent engineering team to realize the advantage while being in operation.
Within a multiple compressor configuration, each compressor is supported by an individual and separate refrigeration circuit. The separate refrigeration circuit makes the servicing of under-maintenance modules easy, simultaneous to working module being on duty. The equipment is compact and contains fluid pump as well as storage tank on skid.
Additional Information:
Payment Terms : L/C
Specificarions
| MODEL | CAPACITY | COMPRESSORS | FLOW RATE |
|---|---|---|---|
| DCM AST | TR | - | CMH |
| DCM-A-10 | 10 TR | 2 | 6 |
| DCM-A-12 | 12 TR | 2 | 7.2 |
| DCM-A-15 | 15 TR | 2 | 9 |
| DCM-A-20 | 20 TR | 2 | 12 |
| DCM-A-25 | 25 TR | 2 | 15 |
| DCM-A-30 | 30 TR | 2 | 18 |
| DCM-A-40 | 40 TR | 2 | 24 |
Our precision range of Water Cooled Screw Chiller - Multiple Compressors is of world class quality and is fabricated in our state-of-the-art manufacturing unit having an option of using CFC free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank. These chillers are rated for an ambient of up to (+) 50°c and cooling tower water temperature up to (+) 37°c at the inlet of the condenser. Our range is manufactured using reputed screw compressors from bitzer (Germany) and frascold (Italy). Fully microprocessor based, these chillers are suitable for process cooling applications from (+) 20°c upto (-) 40°c. We offer these multiple screw compressors in one machine but having separate and individual refrigeration circuits.
Features:
The various operating voltages of these chillers are:
Specifications
| Model | Capacity (TR) | QTY. | Flow Rate (CMH) |
|---|---|---|---|
| DCM-W-60 | 60 TR | 2 | 36 |
| DCM-W-80 | 80 TR | 2 | 48 |
| DCM-W-100 | 100 TR | 2 | 60 |
| DCM-W-115 | 115 TR | 2 | 69 |
| DCM-W-150 | 150 TR | 2 | 90 |
| DCM-W-175 | 175 TR | 2 | 105 |
| DCM-W-250 | 250 TR | 2 | 150 |
| DCM-W-300 | 300 TR | 2 | 180 |
| DCM-W-350 | 350 TR | 2 | 210 |
Our company offers Air Cooled Screw Chiller - Multiple Compressors, which is fabricated in our ISO 9001:2008 certified manufacturing unit factory with an option of using cfc free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank. Utilizing highly reputed screw compressors from bitzer (Germany) and frascold (Italy), these air cooled screw chillers are fully microprocessor based suitable for process cooling applications from (+) 20°c up to (-) 40°c and for lower temperatures of up to (-) 50°c.
The various operating voltages of these chillers are:
Specifcations
| Model | Capacity (TR) | QTY. | Flow Rate (CMH) |
|---|---|---|---|
| DCM-A-120 | 120 TR | 2 | 72 |
| DCM-A-145 | 145 TR | 2 | 87 |
| DCM-A-175 | 175 TR | 2 | 105 |
| DCM-A-240 | 240 TR | 2 | 144 |
| DCM-A-290 | 290 TR | 2 | 174 |
| DCM-A-350 | 350 TR | 2 | 210 |
We are reckoned among the well known Manufacturers, Suppliers and Exporters of Multiple Compressor Water Cooled Scroll Chillers. The Scroll Chillers offered by us are manufactured in compliance with set industrial norms. Our experts carry out various quality-tests based on different parameters on the Chillers before the final dispatch. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of the Chillers within the allocated time.
Specificarions
| MODEL | CAPACITY | COMPRESSORS | FLOW RATE |
|---|---|---|---|
| DCM WST | TR | CMH | |
| DCM-W-6 | 6 TR | 2 | 3.6 |
| DCM-W-12 | 12 TR | 2 | 7.2 |
| DCM-W-16 | 16 TR | 2 | 9.6 |
| DCM-W-22 | 22 TR | 2 | 13.2 |
| DCM-W-24 | 24 TR | 2 | 14.4 |
| DCM-W-30 | 30 TR | 2 | 18 |
| DCM-W-40 | 40 TR | 2 | 24 |
Our company offers Air Cooled Screw Chiller Multiple Compressors, which is fabricated in our ISO 9001:2008 certified manufacturing unit factory with an option of using cfc free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank. Utilizing highly reputed screw compressors from bitzer (Germany) and frascold (Italy), these air cooled screw chillers are fully microprocessor based suitable for process cooling applications from (+) 20c up to (-) 40c and for lower temperatures of up to (-) 50c.
We are engaged in manufacturing Air Cooled Screw Chiller Single Compressor, which is fully microprocessor based suitable for process cooling applications from (+) 20c up to 40c and for low lower temperatures of up to (-) 50c please refer brine chillers. These are fabricated in with an option of using cfc free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank and are also rated for an ambient of up to (+) 50c. The air cooled screw chillers are manufactured with highly reputed screw compressors from bitzer (Germany) and frascold (Italy).
We are engaged in offering a wide range of Water Cooled Screw Chiller Single Compressor, which is manufactured using quality screw compressors from bitzer (Germany) and frascold (Italy). These are offered with multiple screw compressors in one machine but have separate and individual refrigeration circuits. Fabricated in ISO certified manufacturing unit with an option of using CFC free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank. Our range of water cooled screw chiller is also rated for an ambient of up to (+) 50c and cooling tower water temperature up to (+) 37c at the inlet of the condenser. The chillers are fully microprocessor based and are suitable for process cooling applications from (+) 20c up to (-) 40c.
The DRYCOOL series have been realized to offer to the users all the advantages of a long lasting investment as well as the use of an environmental friendly fluid. The use of ammonia, will maximize the performance of the machines with an overall benefit on the running costs the users have to bear. Ammonia represents one of the possible ways to reduce the environmental impact of the cooling sector (GWP = 0 and ODP = 0).
The engineering of the DRYCOOL ammonia chillers has been particularly detailed, to offer to the customers the widest possibility of choice. All the range is available in several set-up according to the single specifications of the project or customers needs.
The DRYCOOL Chillers can be designed for both the cooling of the water as such, or the cooling at negative temperatures of brine solutions, whether they are based on glycols or salt solutions.
The units are made by a self supporting painted steel frame welded with pressbent metal sheet profiles. All the components of the steel frame are epoxy powder coated.
Our organization is manufacturing Oil Chillers, which is offered in various capacities such as from 6, 000 K.Cal/hr. up to 60, 000 K.Cal/hr. Our range can be used to cool the oil directly using refrigerant, up to a oil temperature of (+) 45C without over heating the compressor. Specially designed with intrinsic with imported refrigerant to oil exchanger with sealed and scroll compressors depending on the size of the equipment, these are catering to the requirements of the industrial units, pharma and chemicals and pipe industry.
We are offering Industrial Scroll Chiller which is manufactured with world class scroll compressors from danfoss-maneurop and copeland only. These are offered with multiple scroll compressors in one machine but having separate and individual refrigeration circuits and are fully microprocessor based suitable for process cooling applications from (+) 20c up to (-) 5c and for lower temperatures of up to (-) 50c. We offer our range with an option of using CFC free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank. These chillers are also rated for an ambient of up to (+) 50c.
CHOICE OF SCREW COMPRESSOR of Hanbell (Taiwan), Bitzer (Germany) & J&E Hall (UK). All options are semi-hermetic in construction, thereby making it maintenance friendly. The screw compressor range offered is specifically developed for low temperature chillers applications and is offered along with adjustable volume ratio. Besides internally built oil separation system, check valves at suction and discharge port are provided as standard part of the OEM equipment. The screw compressor range offered is specifically designed by the respective OEMs for low temperature applications.
High cop/eer as an issue proficient gathering of the refrigerant. These water cooled chiller units are intended to meet the relevant necessities of ASHRAE/ANSI 15 Safety Code. Since the condensers are liberally oversized, productive gathering of the refrigerant prompts lower IKW contrasted and other accessible brands.
Shell & tube evaporator is constructed with copper containers of 19 SWG that empowers them to withstand hard water with PH more noteworthy than 8. The copper tubes contain Flamingo licensed star turbulator embeds that give turbulence to the refrigerant coursing through the copper tubes. As an issue of this turbulence these Shell & Tube evaporators have amazingly effective hotness exchange rate. The shell is produced from high-review steel. The evaporator is planned according to ASME Section VIII Div.1.
Available in a choice of refrigerants R-22 (Freon), R-407c and R-134a. Both R-407c and R-134a are environment neighborly and non-ozone draining refrigerants.
Ultra efficient condensing using outer finned copper tubes for increasing heat transfer surface results in higher efficiencyin comparison to copper tubes without finning. The copper tubes are of 16 SWG and are finned on the outer surface to accommodate up to 26 fins per inch. The copper tubes are mechanically expanded through a torque controlled machine on the tube sheets that are manufactured on imported VMC machine.
Economizer for higher efficiency is provided as per refrigerant used and depending upon the liquid temperature range desired. Economiser is provided as standard part of supply in process chillers opted for evaporating temperature of 0 deg. C or lower. The economizer/sub-cooler enhances the overall capacity of the chiller by 10%, and reduces the power consumption, thereby increasing the overall Coefficient of Performance (COP).
Available in a choice of refrigerants R-22 (Freon), R-407C and R-134a. Both R-407C and R-134A are environment friendly and non-ozone depleting refrigerants.
Additonal air cooled type oil cooler is added depending upon the refrigerant used and the chilled water/brine temperature desired. The oil cooler helps maintain the oil temperatures flowing through the compressor within safe limits. The oil cooler fan is automatically controlled depending upon the oil temperature. This feature enhances the screw compressor life.
Liquid injection is a standard gimmick and is utilized to cool the compressor engine slowing down. When the release temperature surpasses the ordinary range, an electric solenoid curl infuses fluid refrigerant to keep the slowing down inside protected breaking points. This peculiarity upgrades the life of the screw compressor.
Thermostatic expansion valve is given as an issue some piece of the water cooled screw chiller gear. Electronic extension valve can likewise be alternatively given.
Control panel with IP-65 assurance is given as standard piece of the water cooled supplies.
Microprocessor based controller is a standard piece of the water cooled screw chiller supplies. The controller permits various set focuses that can be arranged to specific set of values that may be considered inside the safe working extent. If there should be an occurrence of any rupture in any of the set point esteem the controller will excursion the chiller after the fed wellbeing postponement period has passed and show it on the LCD show. Additionally, the controller naturally conforms the limit in a stepped configuration making them perfect for variable burden applications.
We are engaged in manufacturing Air Cooled Screw Chiller - Single Compressor, which is fully microprocessor based suitable for process cooling applications from (+) 20°c up to 40°c and for low lower temperatures of up to (-) 50°c please refer brine chillers. These are fabricated in with an option of using cfc free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank and are also rated for an ambient of up to (+) 50°c. The air cooled screw chillers are manufactured with highly reputed screw compressors from bitzer (Germany) and frascold (Italy).
The various operating voltages of these chillers are:
Specifcations
| Model | Capacity (TR) | QTY. | Flow Rate (CMH) |
|---|---|---|---|
| DCS-A-25 | 25 TR | 1 | 15 |
| DCS-A-35 | 35 TR | 1 | 21 |
| DCS-A-45 | 45 TR | 1 | 27 |
| DCS-A-50 | 50 TR | 1 | 30 |
| DCS-A-70 | 70 TR | 1 | 42 |
| DCS-A-80 | 80 TR | 1 | 48 |
| DCS-A-110 | 110 TR | 1 | 66 |
Specifications
The Air Cooled Chillers are suitable for working in extreme tropical weather conditions with maintaining energy and operational efficiency. The equipment is designed and manufactured in compliance with superior designing and manufacturing standards. The environmental friendly chillers are easy to install and are tested on all the required international parameters to be at par with the best.
Specifications
| MODEL | CAPACITY | COMPRESSORS | FLOW RATE |
|---|---|---|---|
| DCS AST | TR | - | CMH |
| DCS-A-3 | 3 TR | 1 | 1.8 |
| DCS-A-5 | 5 TR | 1 | 3 |
| DCS-A-6 | 6 TR | 1 | 3.6 |
| DCS-A-8 | 8 TR | 1 | 4.8 |
| DCS-A-10 | 10 TR | 1 | 6 |
| DCS-A-12 | 12 TR | 1 | 7.2 |
| DCS-A-15 | 15 TR | 1 | 9 |
| DCS-A-20 | 20 TR | 1 | 12 |
| DCS-A-25 | 25 TR | 1 | 15 |
| DCS-A-30 | 30 TR | 1 | 18 |
We are engaged in offering a wide range of Water Cooled Screw Chiller - Single Compressor, which is manufactured using quality screw compressors from bitzer (Germany) and frascold (Italy). These are offered with multiple screw compressors in one machine but have separate and individual refrigeration circuits. Fabricated in ISO certified manufacturing unit with an option of using CFC free refrigerants r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank. Our range of water cooled screw chiller is also rated for an ambient of up to (+) 50°c and cooling tower water temperature up to (+) 37°c at the inlet of the condenser. The chillers are fully microprocessor based and are suitable for process cooling applications from (+) 20°c up to (-) 40°c.
Features:
The various operating voltages of these chillers are:
Specifications
| Model | Capacity (TR) | QTY. | Flow Rate (CMH) |
|---|---|---|---|
| DCS-W-30 | 30 TR | 1 | 18 |
| DCS-W-40 | 40 TR | 1 | 24 |
| DCS-W-50 | 50 TR | 1 | 30 |
| DCS-W-57 | 57 TR | 1 | 34.2 |
| DCS-W-75 | 75 TR | 1 | 45 |
| DCS-W-90 | 90 TR | 1 | 54 |
| DCS-W-100 | 100 TR | 1 | 60 |
| DCS-W-120 | 120 TR | 1 | 72 |
| DCS-W-145 | 145 TR | 1 | 87 |
| DCS-W-166 | 166 TR | 1 | 99.6 |
| DCS-W-185 | 185 TR | 1 | 111 |
| DCS-W-245 | 245 TR | 1 | 147 |
Our organization is manufacturing Oil Chillers, which is offered in various capacities such as from 6, 000 K.Cal/hr. up to 60, 000 K.Cal/hr. Our range can be used to cool the oil directly using refrigerant, up to a oil temperature of (+) 45°C without over heating the compressor. Specially designed with intrinsic with imported refrigerant to oil exchanger with sealed and scroll compressors depending on the size of the equipment, these are catering to the requirements of the industrial units, pharma and chemicals and pipe industry.
These chillers are rated for an ambient of (+) 50°C and various operating voltages which are:
We are offering Water Cooled Scroll Chiller which are fabricated with globally renowned scroll compressors from danfoss-maneurop and Copeland. Our range of chillers is fully microprocessor based and suitable for process cooling applications from (+) 20°c up to (-) 15°c and for lower temperatures of up to (-) 50°c please refer brine chillers. Offered with multiple scroll compressors in one machine but having separate and individual refrigeration circuits, these chillers are also rated for an ambient of up to (+) 480c and cooling tower water temperature up to (+) 37°c at the inlet of the condenser. We manufacture our range in an ISO 9001 certified unit, with an option of using CFC free refrigerant r-407c & r-134a complete with in-built process pump and stainless steel chilled water expansion tank.
The various operating voltages of these chillers are:
Design data:
Features:
Specificarions
| MODEL | CAPACITY | COMPRESSORS | FLOW RATE |
|---|---|---|---|
| DCS WST | TR | CMH | |
| DCS-W-3 | 3 TR | 1 | 1.8 |
| DCS-W-6 | 6 TR | 1 | 3.6 |
| DCS-W-8 | 8 TR | 1 | 4.8 |
| DCS-W-11 | 11 TR | 1 | 6.6 |
| DCS-W-12 | 12 TR | 1 | 7.2 |
| DCS-W-15 | 15 TR | 1 | 9 |
| DCS-W-20 | 20 TR | 1 | 12 |
| DCS-W-25 | 25 TR | 1 | 15 |
| DCS-W-30 | 30 TR | 1 | 18 |
The DRYCOOL series have been realized to offer to the users all the advantages of a long lasting investment as well as the use of an environmental friendly fluid. The use of ammonia, will maximize the performance of the machines with an overall benefit on the running costs the users have to bear. Ammonia represents one of the possible ways to reduce the environmental impact of the cooling sector (GWP = 0 and ODP = 0).
The engineering of the DRYCOOL ammonia chillers has been particularly detailed, to offer to the customers the widest possibility of choice. All the range is available in several set-up according to the single specifications of the project or customers’ needs.
The DRYCOOL Chillers can be designed for both the cooling of the water as such, or the cooling - at negative temperatures - of brine solutions, whether they are based on glycols or salt solutions.
The units are made by a self supporting painted steel frame welded with pressbent metal sheet profiles. All the components of the steel frame are epoxy powder coated
Features:
