- Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments
- highly needed contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three
- different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides
- protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These
- cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / shottaff, samples and the
- environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.
Types:
There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types:
- Type A2: recirculate approximately 70% air and 30% exhaust
- Type B1: recirculate approximately 30% air and 70% exhaust
- Type B2: Does not recirculate but exhaust 100% air
- Complete Stainless Steel 304 / 316
- Inner Stainless Steel, Outer Mild Steel
- Stainless Steel bench, rest mild Steel
Features
- Main body MS powder coated & Working top and working zone made of stainless steel (304 grade)- Heavy 20gauge
- Two parts in Working top: a) Front perforated portion 5” in SIZE, b) Nonperforated working zone
- Work Area will be approximately 3 X 2 X 2 Feet with a shutter opening of 489 mm
Specification
- HEPA Filters: MINIPLATE with 99.99% efficiency for 0.3 microns with integral metal guards & Filter frame gaskets and
- manufactured in class 100 super clean air-conditioned environment for longer life.
- Air pressurization system: Statically and dynamically balanced, fitted with the special vibration-reducing system to suit low
- noise and vibrations.
- UV lamp: In the working zone (40 microwatts/ square cm at 254 mm or better) and placed so that the operator cannot see
- directly i.e. eyes will be always protected.
- Rehabeatable pre-filters should have an efficiency of more than 80%.
- Switches & Electrical sockets outlets for 15/5 amp.
- Should have Pressure Monitors digital
- Exhaust blower will be capable of 100% exhaust interconnected with supply air blower; the system will only start when the
- negative pressure is developed.
- Back holes will be there on vertical walls to provide more work area on the table.
- Provided with Switches & Electrical sockets outlets for 16 Amp.
- Suitable power supply 230 Volt AC
GST : 24AAGCD6504R1ZB
4.0/5
Dr. Prakash Mansara (DualLife Science Pvt Ltd)
212-Platinum Plaza, Nr. VT Circle, Sarthana Jakat Naka, Surat, Gujarat - 395006
Share us via
