Eagle Engineering Industries

Flow control unit it is been manufactured as per system requirement of Dry Fog Dust Suppression. It is used to Start / Stop flow of water and air for Dry Fog Dust Suppression. It consists of Solenoid Valve, Pressure Regulator Valve, Pressure Regulator, Air Filter, Pressure Switch, Stainless Steel Pipes and Pipe Fittings.

Dust suppression system air entraining liquid droplets, goes trough a field of sound waves which produce a further break up and a lower droplet dimension.

Flow nozzle is realized through an impact between the two phase flow and a resonator located in front of the nozzle orifice.

Driven with excellence, we are affianced in the area of offering an exceptional assortment of Atomizing Nozzles Top notch grade array of inputs is used in the development of our offered range of burners. Appreciated for their fine finish, low maintenance, light weight and stain proof nature, these offered products are commonly seen in industries.

In the second step the two phase flow, air entraining liquid droplets, goes trough a field of sound waves which produce a further break up and a lower droplet dimension.Dry For Nozzles can only be manufactured with high precision machining operations but offer the following remarkable advantages.

The spray housing with its filter assembly, has been develope to protect the spary lets against flying rocks and other external sources of damage. An extra large filter used having an approx 10 times laeger than normally required for sprays to increase the operating time between cleaning. Housing: Die Cast Aluminium Alloy. Plug: Connector, Nut, Tipholder, Etc : S.S. 316 Filter: Brass Discharge Rate: Nozzles Are Avaiable Having Discharge : 1 To 8 L.P.M. At 2.5 To At 5 Kg/Cm2 Pressure As Per Requirement.

• INCLINAION:40
• DISCHARGE:6-22.2 M3/HR
• PRESSURE:3-6 KG CM2
• MODEL:ES - 40 PC
• CONNECTION:11/2" BSP MALE
• COVRING DIA:42 - 66 M.

The Sprinkler Sprinkling From one Nozzle in one Direction is smooth & Reaching Far, Water Drops Are Less Influenced By Wind. The Most Suitable for Spraying in a Large Area for Dust Suppression System. The Sprinkler is Suitable for Dust suppression System for stock pile Area & Having Trajectory Angle of 40 Deg. Which Covers Full Height of Stockpile. The Sprinkler Rotates Smoothly step by step like the arm of clock. The material of all components of The sprinklers are Corrosion & Pressure Resistant.

• COVRING DIA:56 - 86 M.
• INCLINAION:400
• DISCHARGE:12.3-37.2 M3 / HR
• MODEL:ES - 65 PC
• CONNECTION:21/2" BSP FEMALE
• PRESSURE:3-5 KG CM2

The Sprinkling From one Nozzle in one Direction is smooth & Reaching Far, Water Drops Are Less influenced By Wind. The Most Suitable for spraying in a Large Area For Dust Suppression System. The Sprinkler is suitable for Dust Suppression System stockpile Area & Having Trajectory Angle of 4. Deg. Which Covers full Height of stockpile. The Sprinkler Rotates Smoothly step by step like the arm of a clock. The material of all components of The sprinklers are Corrosion & Pressure Resistant.

The solenoid box controls the flow of solution/water to the spray each unit is supplied with a inlet filter, solenoid valve unions are so that the filter and solenoid valve assembly can be removed easily for maintenance. A solenoid box is provided with a hinged door for maintenance. Solenoid box cabinet is fabricated from 2mm m.s. plate with 2 coat of paint, box is complete with mounting lugs, so that it can be bolted to a wall or structure adjacent to the spry. Solenoid valve: Servo operated, normally closed, energised to open. Suitable to work on 100v/220v, 50c/s, a.c. supply or 24 v dc or as per system requirement. Filter: The 50 mesh insert can be removed for cleaning or replacement. Pipes & fittings: As per is 1239 – I – II Solenoid box are available for 25, 32, 40, 50, & 65 mm nominal bore pipe size.

With the inclusion of advanced technology and innovative machines, we are engaged in offering a comprehensive range of Metallic Nozzle Holder.

Leveraging on our vast manufacturing facilities, we provide our clients a quality range of Air Atomizing Nozzles. In order to provide atomized spray, these nozzles make use of collision of liquid and sir. Available in various designs, these nozzles are manufactured using sophisticated technology to assure dimensional preciseness and durability.

With the aim of attaining pinnacle success in the market, we are engaged in developing high quality Sprinkler Nozzle. Our offered nozzles are sturdy and long lasting and wining strong trust of our discerning clientele from the agricultural sector. Ideal to be used for both low and high pressure water pumps the offered nozzles can be ordered from us with assurance of market leading price.

Spray header for plain water D.S. system are manufactured as per requirement from ERW Pipe & Tested for hydraulic pressure for functional requirements Spray header for Dry Fog D.S. system are manufactured as per requirement from SS-304 Pipe & Tested for & Pneumatic hydraulic pressure for functional requirements