Easy Solar Solutions Pvt. Ltd

Laxmi Nagar, Delhi

Solar road studs are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centerlines. Embedded in the road surface, they are an electronic improvement on the traditional cat's eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the LEDs makes them easily visible at distances of about 900 m under favorable conditions. Averaging about 100 mm square or 100 mm diameter and about 40 mm thick, units are extremely robust to avoid damage by passing vehicles, and are normally constructed of engineering plastics and polycarbonates. Use of solar road studs reduces the necessity of headlight main beams and the accompanying hazard of dazzling oncoming drivers. They are also more visible in rain and fog conditions where the old type retro reflectors and road markings are problematic. The solar cells charge batteries or capacitors during sunlit hours, over which period the flashing LEDs are turned off by a photo switch.

Solar Street lighting system is an ideal lighting system for the illuminations of streets, squares & cross roads located in areas that are not connected to the power grid. This fully integrated system combines the latest 7 most innovative technologies available providing years of convenient & trouble free lighting fully assembled factory tested kits are available with or without mounting poles.

The standalone Solar Photovoltaic street lighting system comprises of a compact fluorescent lamp (CFL) as light source, re-chargeable lead acid battery for storage, PV modules for charging the battery, suitable electronics for the operation of the lamp & safe charging & discharging the battery & mechanical hardware for fixing these sub systems.Path Shine is available either with automatic dusk to dawn operation or with a Pre-set timer also. Path Shine is available in CFL in three models depending on the wattage of the SPV modules, type & size of the battery & mode of operation.

Features

• Automatic Dusk to Dawn operation (DTDC) / Timer Operation.
• No strains & pain of manual operations.
• M.N.R.E. approved model.
• On DGS&D rate contract.
• Reliable mosfet based electronics.
• PWM charging algorithm.
• Temperature compensated set points.
• Long life CFL lamp with 8000 burning hours.
• Longer life MS mechanical structure & battery box.
• Selective height of the pole as per customer's requirement upto 15feet.

The Solar Charge Controller, which protects battery from overcharging or excessive discharge are the essential component of Solar PV systems. Easy Solar introduces professional Solar Charge Controllers using the most innovative & state of the art technology.

The Solar Charge Controller uses P.W.M charging technology, So that as the battery reaches full charge, the PWM pulses Slower, gradually tapering OFF the Charge.Pulsing is good for the batteries since it gently mixes the electrolyte, preventing, stratification & sulphation low voltage disconnect protects the batteries from severe discharge by shutting OFF loads before the battery voltage drops to damaging levels.Temperature Compensation adjusts the set point voltages according to the ambient temperature.

Features of PV Modules

• Energy efficient controllers for Rural/Urban solar charging system.
• Low power load controller & PWM solar charger in single unit.
• Multi layer timing for overload protection.
• Temperature compensation for better battery charging on various climate & terrain.
• Built with perfect blend of state of art of electronics & micro computing.
• Electronic blocking to save precious energy saved in battery.
• Compact in size & easy to install.

The Solar Home Lighting System offered by Easy Solar is of high performance, complete & easy to install. Incorporating years of experience & the latest solar technology, easy harness the power of the Sun to provide reliable & cost effective electricity. These systems supply electricity for lighting, entertainment & information to homes that are not connected to grids or where it is quite erratic. The solar home system is an excellent solution for household electrification in rural areas.

A typical standalone Solar photovoltaic home system comprises PV modules for charging the battery, Solar deep cycle battery for storage, a charge controller for the safe charging & discharging of the battery, lighting luminary & provision for connecting other loads (Radio, Tape recorders, Portable TV etc.) as well as a complete set of installation hardware.

The battery & SPV module rating are selectable as per the requirement. We provide as easy-to-use illustrated use's manual for easy installation & trouble free usage.

Mono / Multicrystalline

Easy Solar Modules use crystalline solar cells. The solar cells are individually characterized and electronically matched prior to their interconnection. Encapsulation beneath imported high transmission tempered glass is a accomplished using an advanced, UV resistant thermosetting plastic. the encapsulant, ethylene vinyl acetate, cushions. The solar cells within the laminate and Protects the cells from etching due to harsh weather conditions. The high strength polymer sheet protects the rear surface from ingrees of moisture and mechanical damage. Easy Solar Modules are a versatile solution for stand alone power system, home light systems, solar displays, telecommunication and water pumps, due to higher system voltage Easy Solar modules are excellently suited for grid connected solar photovoltaic implementation.

Features

• Safe & Easy to install.
• Free from noise, smoke & pollution.
• Requires very little attention.
• Possible to expand the system in future.
• Available in different configurations.
• Elegant & efficient light units.
• Provisions for operating extra loads.
• Highly advanced charge controllers.
• Longer battery life ensured.
• As per M.N.R.E. specifications.
• Adequate protections & indications.
• AC / Hybrid Invertor System.
• Nabard Banking tie ups for Subsidy.

In the era of urbanization use of sign-boards is increasing every day. The commercial tariff of electricity for lighting sign-boards is significantly high. Solar Sign-Board System is a cost-effective option for user to achieve significant savings in their power bills.Features:Convert existing EB connection to Solar System through battery storageLED typeBacklit

We offer our clients with solar blinkers that are the LED based Solar Blinker Unit. They have blinking cycle of Blinking mode 1 sec & Off mode for 1 sec. They are generally used as a symbol of some warning. This blinkers are available in Amber, Red color. Green Blinking signal is rarely used. This Solar Road Safety Warning Blinker uses solar energy to operate the signal. So there is no need of Electricity supply. The whole assembly includes Solar Panel, Frame for Solar Panel, Traffic Signal Blinker, Wire Harness, Charge Controller, Battery, Battery Box, Signal Pole etc. Once you have establish Solar Traffic warning Blinker it lasts for many year.

Features:

• Polycarbonate Die molded Body conforming to international standard
• Size : 300mm DIA Signal Aspect ,
• 200mm DIA Signal Aspect
• 20 to 90 flashes per minutes as desired
• Sealed Maintenance Free Battery
• Inbuilt Control Card & solid state Blinker
• Solar Charge Regulator @ 90% charge efficiency
• 12 or 24 hours Operation
• Automatic On/Off Dusk to Dawn Operation
• 2 to 4 days System Autonomy
• Working Voltage: 12, 24 Volts D.C
• 200mm / 300 mm Round Light Source
• Cluster of High Intensity Ultra Bright LEDs
• Red, Green, Amber LED Colors
• Visibility 500 meters, Good even during Hazy Weather
• Single / Double / Triple Aspect Model.
• Fine control over operation of system, panel, blinking, battery etc.

Solar LED home lighting systems are ideal sources for providing indoor illumination in remote areas and un-electrified villages. The Solar LED home lighting system essentially consists of the Solar module, suitable module mounting structure, battery, battery box, charge-controller, luminaries, inter-connecting cables and switches etc. All light assemblies have built-in high efficiency and high frequency DC to AC inverter circuits for suitable to run CFL lamps. The Indoor lighting systems would also come with a provision to Mobile Charger. The lighting system is designed to operate 3 to 4 hours a day. Home light is a DC operated wall mountable indoor lighting LED luminary. It consists of a Power LED and a high frequency inverter. High frequency inverter offers high efficiency, more light output and long service life to the LED luminaries. The Indoor lighting luminaries are available in different wattages and models. All adequate protections are provided in the luminary for safety, reliability and long life. These lights are ideally suited for lighting applications powered from renewable energy sources like solar, wind etc. These are widely used in Solar Home systems. All five models of solar home lighting systems are tested and approved by MNRE/SEC Govt. of India.

Feature

• Safe, efficient and reliable
• Affordable
• Easy to install
• Wall mountable type
• Maintenance Free
• High efficiency electronics
• Aesthetically designed portable light
• Available in different Models

Street lighting in most of the towns and cities in India are poor maintained and energy inefficient. There is tremendous potential for the improvement in maintenance practices and for the energy conservation with improved O & M practices and with energy efficient retrofits. Easy Solar Solutions Pvt. Ltd.Bright Up LED Lighting gives you a well designed street lighting or public lighting or outdoor lighting should permit users of road at night to move about with the greatest possible safety and comfort so that the traffic capacity of the road at night is as much equal as possible that planned for the daytime. Efficiently designed street lighting enables the driver to see distinctly and drive safely to reach the destination. Generally used HPSV Light will have lighting distribution over-lights the area directly beneath the luminary creating hot spots in order to maintain minimum levels further away. LED luminary maintains minimum light levels across all spacing while significantly increasing overall uniformity.

eatures:

• High efficient LEDs are used with >100lum/Watt.
• Long life >50, 000hrs.
• Casing has IP5.
• Over voltage & over current protection
• 6 Degree Protection.
• Environmental friendly with no carbon compounds
• decomposition in Light output

We are offering solar led lantern.Easy solar led lanterns use sunlight to power high intensity led's that provide light for up to 12 hours on a fully charged batter.

Deals in solar charge controller, which protects battery from overcharging or excessive discharge are the essential component of solar pv systems. It is has power load controller & pwm solar charger in single unit.

We are deals in solar digital inverter, which is run all expensive appliances like t.v., refrigerators, washing machine, water pumps, microwave ovens, mobile charger etc.

We are offering home lighting system.The solar home lighting system offered by easy solar is of high performance, complete & easy to install. Incorporating years of experience & the latest solar technology, easy harness the power of the sun to provide reliable & cost effective electricity.

We are offering Solar Street lighting system, is an ideal lighting system for the illuminations of streets, squares & cross roads located in areas that are not connected to the power grid.

The application options of our innovative photovoltaic modules are unlimited and hence the R&D that goes into making these units is also unmatched. We offer a great variety of solutions for this sector, so no matter how large or small the scale of your project is, we have the right solution for it. Our collaboration with the best international names in the sector has made our photovoltaic modules superior in all respects. At present our product range includes over 20 types of SPV modules and we are evolving faster to provide you with even more advanced modules in the days to come.

Mono / Multicrystalline

Easy Solar Modules use crystalline solar cells. The solar cells are individually characterized and electronically matched prior to their interconnection. Encapsulation beneath imported high transmission tempered glass is a accomplished using an advanced, UV resistant thermosetting plastic. the encapsulant, ethylene vinyl acetate, cushions. The solar cells within the laminate and Protects the cells from etching due to harsh weather conditions. The high strength polymer sheet protects the rear surface from ingrees of moisture and mechanical damage. Easy Solar Modules are a versatile solution for stand alone power system, home light systems, solar displays, telecommunication and water pumps, due to higher system voltage Easy Solar modules are excellently suited for grid connected solar photovoltaic implementation.

 

Features of PV Modules

• Wide Range of modules from 3.0 wp to 250 wp.
• Designed to meet IEC, MNRE, UV, RDSO standards
• Assembled with high efficiency crystalline silicon cells, laminated between glass and improved power tolerance.
• All solar cells are redundantly interconnected in series to increase integrity.
• High efficiency crystalline cells.
• Sealed weather proof junction box with bypass diodes to minimize power loss
• Can be designed and produced for customized applications.
• Low Iron inner textured toughened Glass for high transmittance, better output and safety.
• Designed with proven materials for reliable and stable operation in outdoor applications.

We are offering solar lantern is a portable light source like a traditional lantern which gives omni directional pure white light. It is known for omni directional pure white light.