Post Your Requirement Menu

Welcome User

Our Products

  1. Sliding Door Hardware 1 Products / Services available
  2. Glass Doors 1 Products / Services available
  3. Building Hardware 1 Products / Services available
  4. Storage Drums, Tanks & Containers 3 Products / Services available
  5. Cabinet Handles 1 Products / Services available
  6. Screws 2 Products / Services available
  7. Locks and Safes 8 Products / Services available
  8. Mechanical Lock 1 Products / Services available
  9. Door Locks 3 Products / Services available
  10. Mirrors, Glassware & Glass Artware 1 Products / Services available
  11. Door, Window Frames 1 Products / Services available
  12. Drawer Hardware 4 Products / Services available
  13. Tables 2 Products / Services available
  14. Kitchen Cabinet 1 Products / Services available
  15. Pipe Tees 4 Products / Services available
  16. Cabinets & Enclosures 1 Products / Services available
  17. Floor Mats 1 Products / Services available
  18. Bicycles, Bicycles Parts and Accessories 1 Products / Services available
  19. Hardware Fittings and Accessories 1 Products / Services available
  20. LED Lamps 1 Products / Services available
  21. Clamps 4 Products / Services available
  22. Woodworking Tools and Machines 1 Products / Services available
  23. Hangers 4 Products / Services available
  24. Furniture Legs 1 Products / Services available
  25. Gifts, Handicrafts & Artifacts 5 Products / Services available
  26. Cupboard 1 Products / Services available
  27. Kitchenware and Cookware 1 Products / Services available
  28. Cabinet Fittings 1 Products / Services available
  29. Cabinet Drawer Lock 1 Products / Services available
  30. Machines and Equipments 1 Products / Services available
  31. Jigs 1 Products / Services available
  32. Electrical Components 1 Products / Services available
  33. Brackets 4 Products / Services available
  34. Ladies Leggings 2 Products / Services available
  35. Rack 2 Products / Services available
  36. Modular Office Workstation 1 Products / Services available
  37. Furniture Hardware & Fittings 7 Products / Services available
  38. Computer Stationery Products 9 Products / Services available
  39. Door Hinges 1 Products / Services available
  40. Plastic Component 1 Products / Services available
  41. Door Hardware 4 Products / Services available
  42. Wall Mounts 1 Products / Services available
  43. Beds 1 Products / Services available
  44. Automotive Body Coach Building 2 Products / Services available
  45. Nuts Bolts and Fasteners 2 Products / Services available
  46. Computer Hardware & Peripherals 2 Products / Services available
  47. Trolleys 4 Products / Services available
  48. Cables and Wire Accessories 1 Products / Services available
  49. Dinnerware, Tableware and Serving Utensils 1 Products / Services available
  50. Door Mats & Bath Mats 1 Products / Services available
  51. Telecommunication Equipment & System 1 Products / Services available
  52. Door & Window Fittings 5 Products / Services available
  53. Metal Furniture Suppliers 1 Products / Services available
  54. Passenger Lift 2 Products / Services available
  55. Buckets, Mugs & Storage Bins 1 Products / Services available
  56. Door Handles 4 Products / Services available
  57. Other Products 26 Products available

Other Products / Services

We are leaders in the market for providing best range of Display Shelf, barrel nut, cable organizer, STEEL CABINET LOCK and STEEL FIX HOUSING

Display Shelf

Elegantly designed to suit different needs. Available in a variety of models and sizes. It is ideal if you have different items to display from time to time. Specially designed to impart maximum strength and to eliminate play. A unique stabilizer screw and nut holds the shelf in place. Available with an elegant Aluminium Track for light loads and a Steel Track for high loads. The tracks which support the shelves are screwed on to the wall, so that they blend well with the decor. Available for glass, wood shelves and hanger systems

View Complete Details

barrel nut

  • Size in (mm) M6 X 50mm

Used to join furniture like chairs, tables, cupboards with screws. The furniture can be knocked down and reassembled in no time Size in (mm) : M6 X 50mm, M6 X 70mm

View Complete Details

cable organizer

  • Drilling Dia. 'A'mm 60
  • Finish Black, Ivory & Grey

Manufactured out of plastic. This unique design has 3 port selection to suit different number of cables.   Manufactured out of plastic. This unique design has 3 port selection to suit different number of cables.

  • SPECIFICATIONS
    Model Code Drilling Dia. 'A'mm Finish
    Cable Organizer Ø60 CO 60 Ø60 Black / White / Grey
           
  • PACKING CHART
    Item Item Code Size Inner Packing (Kgs.) Outer Packing(Kgs.)
    Qty Weight  Qty Weight 
    Cable Organizer Ø 60mm CO60 Ø 60 mm - - 200 4.9
View Complete Details

STEEL CABINET LOCK

Ideal for steel cabinets. With built-in handle and matching handle for the second shutter. No screwing required, click on the cavity in shutter. Item : Steel cabinet Lock cum Handle (without handle set)

View Complete Details

STEEL FIX HOUSING

First minifix housing made out of MS. This is very strong and usable with existing ebco minifix screws and very economical.

  • SPECIFICATIONS
                     Model       Code                Size in mm   Finish
           Steel Fix Housing     SF16 ZW       Ø 15mm, Ht 11.5 mm     Zinc Plated White
       SF16 NP       Ø 15mm, Ht 11.5 mm     Nickel Plated 
View Complete Details

VERTICAL GOLA PROFILE

Ideal for handle-less furniture especially vertical, tall units like larder pull-out in kitchen, wardrobe shutters, etc. Available in L and C models for single or double door application.

  • SPECIFICATIONS
                            Model         Code        Finish
               Vertical Gola Profile C      VG1C-AS           AS
         VG1C-WM          WM
               Vertical Gola profile L      VG1L-AS           AS
         VG1L-WM          WM
     

View Complete Details

CABLE ORGANISER

Broader cable organiser with hinged cover cap. Enables multiple socket usage at the same time. Ideal for both 24mm and 29mm board thickness to clip on. 

  •         SPECIFICATIONS
    Model Code Size Finish
    Cable Organizer - 172 - 65 CO172-65 172 x 65 x 32mm White
View Complete Details

PRO-MOTION DRAWER SYSTEM

Length : 450, 500 & 550mm. The drawer side-board is 88mm high. Drawer width can be designed freely with automatic error adjustment. Hidden full pullout silencing sliding skid can bear 30kgs. and enjoys excellent stability and quite and smooth sliding performance. Quick installation and dismantle. Newly-designed built-in damper is free from reinstallation and ensures soft and smooth drawer movements.

  • SPECIFICATIONS

    Model Code Basic length Internally usable drawer depth Minimum installation depth of drawer Minimum installation height Finish
    Pro-motion Drawer System 90 - Slim 2 PMDS1 45 (S2) 450mm 424mm 450mm 110mm White / Anthracite
    PMDS1 50 (S2) 500mm 474mm 500mm 110mm White / Anthracite
    PMDS1 55 (S2) 550mm 524mm 550mm 110mm White / Anthracite
    Fascia Connector for PMDS1 'S2' Series PMDS1S2-FC - - - - White / Anthracite
    Fascia Connector for PMDS3 'S2' Series for Glass / Aluminium Panel PMDS3S2-FC GP - - - - White / Anthracite
    Fascia Connector for PMDS3 'S2' Series for Rail PMDS3S2-FC R - - - - White / Anthracite
    Aluminium Fascia Panel for PMDS3 'S' Series PMDS3S-FP 2000mm - - - White / Anthracite
    Glass Fascia Panel for PMDS3 'S' Series - 45 PMDS3 S FG 45 for 450mm cabinet - - - -
    Glass Fascia Panel for PMDS3 'S' Series PMDS3 S FG 60 for 600mm cabinet - - - -
    Glass Fascia Panel for PMDS3 'S' Series - 90 PMDS3 S FG 90 for 900mm cabinet - - - -
    Aluminium Fascia Rail for PMDS3 'S' Series PMDS3 FR 2000 mm - - - White / Anthracite
View Complete Details

COMPUTER KEYBOARD PLATFORM SOFT PAD

COMPUTER KEYBOARD PLATFORM SOFT PAD     Platform made out of high quality foil pressed on pre-laminated MDF. Left or right side swivel mouse pad tray. Height  adjustment on mounting brackets. Smooth quiet movement with keyboard slides. Also available unique soft pad hand rest to prevent fatigue while working. Removable drawer with latches. Special pressure lock at extended position. Max. Load: 12 kgs. FITTING INSTRUCTIONS Assemble Height adjustment brackets onto slides using M4 screw provided as in Fig.1 Drill as per drilling diagram Fig.2 Height adjustment bracket should be adjusted for desired height. Screw the key board slide onto the table. Table should have minimum horizontal gap of 550mm. Slide the Keyboard Platform out till it automatically latches. To remove Tray lift latches provided on each sides and pull as per Fig.3 Mouse tray shall be fitted on left or right side for which mounting holes are predrilled.

  • SPECIFICATIONS
    Model Type Code Length (mm) Extension (mm) Finish
    Computer Keyboard Platform with soft pad With Mouse Tray KPSM 35 350 200 Black
    Without Mouse Tray KPS 35
    With Mouse Tray KPSM 45 450 250
    Without Mouse Tray KPS 45
  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Computer Keyboard Platform (w/o Mouse Tray with Soft Pad) KPS 35 1 No. 2.7 5 Nos. 15
    KPS 45 1 No. 3.15 5 Nos. 17.3
    Computer Keyboard Platform (with Mouse Tray with Soft Pad) KPSM 35 1 No. 2.95 5 Nos. 16.3
    KPSM 45 1 No. 3.4 5 Nos. 18.5
View Complete Details

FLAT SCREEN HOLDER - WALL MOUNT

FLAT SCREEN HOLDER - WALL MOUNT     Ideal for wall or partition mounting. Compatible for VESA 75mm & VESA 100mm with an extra plate. Direct mounting with system 32 holes. Can be rotated towards left & right and as well as tilted up & down. Single knob for locking all adjustments. Die cast for good aesthetics.   FITTING INSTRUCTIONS Screw the Mounting Bracket to the wall or partition with screws. (Ref. Fig. 1) Assemble other parts as shown in diagram. (Ref. Fig. 2) Screw the flat screen to the hanging bracket with M4 screws provided. (Ref Fig. 3) For VESA 100mm model screw the 100 mm plate to hanging bracket with M4 screws. (Ref Fig. 4) Rotation is possible left & right as well as up & down directions. (Ref. Fig. 5)

  • SPECIFICATIONS
    Model Code TV to Wall Distance Finish
    Flat Screen Holder - Wall Mount FSHW-1 90mm Black / Silver / White Matt / Anthracite
  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Flat Screen Holder - Wall Mount FSHW-1 1 No. 0.6 32 Nos. 20.4
View Complete Details

FLAT SCREEN HOLDER EXTENDED ARM - WALL MOUNT

FLAT SCREEN HOLDER EXTENDED ARM - WALL MOUNT     Ideal for wall or partition mounting. Compatible for Vesa 75mm & Vesa 100mm with an extra plate. Direct mounting with system 32 holes. Can be rotated towards left & right and as well as tilted up & down. Double locking knobs gives ample adjustment. Extended arm keeps the screen away from wall, thus gives ample place for rotation. Die cast for good aesthetics. FITTING INSTRUCTIONS Screw the mounting bracket to the wall or partition with screws. (Ref. Fig. 1) Assembly drawing (Ref. Fig.2) Screw the flat screen to the hanging bracket with M4 screws provided.(Ref. Fig. 3) For Vesa 100mm model screw the 100mm plate to hanging bracket with M4 screws. Rotation is possible left & right as well as up & down directions. (Ref. Fig. 4)

  • SPECIFICATIONS
    Model Code TV to Wall Distance Finish
    Flat Screen holder - Wall Mount FSHWE-2 74-190mm Black / Silver / White Matt / Anthracite
     

  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Flat Screen Holder - Wall Mount - Extended Arm FSHWE-2 1 No. 0.7 12 Nos. 9.1
View Complete Details

FLAT SCREEN HOLDER - SINGLE ARM

FLAT SCREEN HOLDER - SINGLE ARM     Table top grommet mounting with single arm. Easy to fit. Height adjustment of 100mm. Compatible for VESA 75 x 75 & VESA 100 x 100 with an extra plate. Die cast for good aesthetics. Can be rotated towards left & right as well as tilted up & down with a single knob. FITTING INSTRUCTIONS Drill Ø 12.5mm hole through out on table top on the desired position. Fix the vertical pole as shown in fig. 1. Clip the height adjustment clip on to the one of the holes on the vertical pole and slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip as shown in Fig. 2. Assemble the other parts as shown in Fig. 3. For VESA 100mm model, screw the 100mm plate to the hanging bracket with M4 screws as shown in Fig. 4. Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig. 5. Insert the monitor cables in to the arm clip and wire holder, then clip them to the diagonal arm and vertical pole respectively, as shown in Fig. 6.

  • SPECIFICATIONS
              Model              Code                                                       Finish
    Flat Screen Holder Single Arm             FSHSA                             Black / Silver / White Matt / Anthracite
  • PACKING CHART
    Item Item Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Flat Screen Holder Single Arm FSHSA 1 No. 1.25 8 Nos. 11.2
View Complete Details

FLAT SCREEN HOLDER SINGLE ARM - EDGE MOUNT

FLAT SCREEN HOLDER SINGLE ARM - EDGE MOUNT      Table Top Edge Mounting with Single Arm. Easy to Fit. No drilling of holes required. Height Adjustment of 100mm. Compatible for VESA 75 x 75 & VESA 100 x 100 with an extra plate.  Diecast for good Aesthetics. Can be rotated towards left & right as well as tilted up & down with a single knob. FITTING INSTRUCTIONS Clamp the Vertical Pole onto the edge of the table as shown in Fig.1. Clip the Height Adjustment Clip onto pne of the holes on the Vertical pole, & slide the Diagonal arm on to the pole from top till the bottom face of the arm rests on the Height adjustment Clip, as shown in Fig.2. Assemble the other parts as shown in Fig.3. For VESA 100mm model screw the 100mm plate to hanging bracket with M4 screws as shown in Fig.4. Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig.5. Insert  the Monitor cables into the Arm Clip & Wire Holder, then clip them to the Diagonal Arm & Vertical Pole respectively as shown in Fig.6.

  • SPECIFICATIONS
    Model Code Finish
    Flat Screen Holder Single Arm - Edge Mount FSHSA - EM Black / Silver / White Matt / Anthracite
  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Flat Screen Holder Single Arm - Edge Mount FSHSA-EM 1 No. 1.5 6 Nos. 10.2
View Complete Details

FLAT SCREEN HOLDER - SINGLE ARM TWIN

FLAT SCREEN HOLDER - SINGLE ARM TWIN     Table top grommet mounting for two flat screens on a single pole. Easy to fit. Height adjustment of 100mm. Compatible for VESA 75 x 75 & 100 x 100 with an extra plate. Die cast for good Aesthetics. Can be Rotated towards left & right as well as tilted up & down with a single knob. FITTING INSTRUCTIONS Drill Ø 12.5mm hole through out on table top on the desired position. Fix the vertical pole as shown in fig. 1. Clip the height adjustment clip on to the one of the holes on the vertical pole and slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip as shown in Fig. 2. Repeat for the second diagonal arm. Assemble the other parts as shown in Fig. 3. For VESA 100mm model, screw the 100mm plate to the hanging bracket with M4 screws as shown in Fig. 4. Screw the flat screens to the hanging bracket with M4 screws provided as shown in Fig. 5. Insert the monitor cables into the arm clip and wire holder, then clip them to the diagonal arm and vertical pole respectively, as shown in Fig. 6.

  • SPECIFICATIONS
    Model Code  Finish
    Flat Screen Holder Single Arm - Twin FSHSAT Black / Silver / White Matt / Anthracite
     

  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Flat Screen Holder Single Arm - Twin FSHSAT 1 No. 2.2 3 Nos 7.6
View Complete Details

FLAT SCREEN HOLDER - DOUBLE ARM

FLAT SCREEN HOLDER - DOUBLE ARM     Table top grommet mounting with double arm. Easy to Fit. Height adjustment of 100mm. Compatible for VESA 75 x 75 & 100 x 100 with an extra plate. Die cast for good aesthetics. Can be rotated towards left & right as well as tilted up & down with a single knob FITTING INSTRUCTIONS Drill Ø 12.5mm hole through out on Table Top on the desired position. Fix the vertical pole as shown in fig. 1. Clip the height adjustment clip on to the one of the holes on the vertical pole and slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip as shown in Fig. 2. Assemble the other parts as shown in Fig. 3. For VESA 100mm model, screw the 100mm plate to the hanging bracket with M4 screws as shown in Fig. 4. Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig. 5. Insert the monitor cables into the arm clip and wire holder, then clip them to the diagonal arm and vertical pole respectively, as shown in Fig. 6.

  • SPECIFICATIONS
    Model Code Finish
    Flat Screen Holder Double Arm FSHDA Black / Silver / White Matt / Anthracite
     

  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Flat Screen Holder Double Arm FSHDA 1 No. 2.23 6 Nos. 14.6
View Complete Details

FLAT SCREEN HOLDER - QUADRUPLE ARM

FLAT SCREEN HOLDER - QUADRUPLE ARM     Table Top Grommet Mounting for four flat screen monitors on two poles. Easy to Fit. Height Adjustment of 100mm. Compatible for VESA 75 x 75 & 100 x 100 with an extra plate. Die cast for good Aesthetics. Can be Rotated towards left & right as well as tilted up & down with a single knob. FITTING INSTRUCTIONS Drill Ø 12.5mm hole through out on Table Top on the desired position. Fix the vertical pole as shown in fig. 1. Clip the height adjustment clip on to the one of the holes on the vertical pole and slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip as shown in Fig. 2. Repeat this until all four arms are fitted. Assemble the other parts as shown in Fig. 3. For VESA 100mm model, screw the 100mm plate to the hanging bracket with M4 screws as shown in Fig. 4. Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig. 5. Insert the monitor cables into the arm clip and wire holder, then clip them to the diagonal arms and vertical poles respectively, as shown in Fig. 6.

  • SPECIFICATIONS
    Model Code Finish
    Flat Screen Holder Double Arm - Quad  FSHDAQ Black / Silver / White Matt / Anthracite

     

  • PACKING CHART
    Model Code

    Inner Packing (Kgs.)

    Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Flat Screen Holder Double Arm - Quad FSHDAQ 1 No. 4.2 3 Nos. 13.6
View Complete Details

CMA - LAPTOP BASE

CMA - LAPTOP BASE     Unique design with laptop plate setup for integrating your laptop as a secondary display. This combined setup is ideal for mobile workers, business travellers, user, etc. who are constantly on the go. Concealed Cable Management System for clutter free work desk. Designed to use with ‘ebco’ Computer Monitor Arms.    FITTING INSTRUCTIONS Screw the Laptop Base onto the computer monitor arm with screws & nuts provided as shown in Fig. 1.  

  • SPECIFICATIONS
                     Model          Code                  Finish
         CMA - Laptop Plate        CMA-LB        White Matt / Athracite
  • PACKING CHART
                 Model     Code    Inner Packing (Kgs)    Outer Packing (Kgs)
         Qty     Weight        Qty   Weight
       CMA - Laptop Plate  CMA - LB     1 No.      0.96     8 Nos.      7.7 

     

View Complete Details

cpu stand

Computer C.P.U. Stand for storage of C.P.U. unit  conveniently  under the table. This save valuable desk top space. Soft vibration pads provided. Width adjustment of 95mm (3 3/4”) provided.   FITTING INSTRUCTIONS Join the base plate and side brackets with screws, nuts and washers provided. (Ref. Fig. 1 & 1A) Width adjustment available is 115mm min. and 210mm max.

  • SPECIFICATIONS
    Model Code Mounting Wheel Dia
    (mm)
    Load
    (kgs)
    Set Ht.
    (mm)
    Material Finish
    CPU Stand with Twin Wheel Castor CPUS 1 Twin Wheel Castor 40 25 68 Steel with Nylon Castors Black / Anthracite / White Matt



  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    CPU Stand with Twin Wheel Castor CPUS 1 - - 10 Nos. 16.75
View Complete Details

CPU STAND - ECO

CPU STAND - ECO     Computer C.P.U. Stand for storage of C.P.U. Unit conveniently under the table. This saves valuable desk top space. Soft vibration pads provided. Width adjustment of 95mm (3 3/4”) provided. FITTING INSTRUCTIONS Join the base plate and side brackets with screws, and washers provided. (Ref. Fig. 1) Width adjustment available is 115 mm Min. and 210 mm Max.

  • SPECIFICATIONS
    Model Code Mounting Wheel Dia.
    (mm)
    Load
    (kgs.)
    Set Ht.
    (mm)
    Material Finish
    CPU Stand - ECO CPUS E1 Twin Wheel
    Castor
    30 12 43 Steel with
    Nylon Castors
    Black / Anthracite / White Matt





View Complete Details

Telescopic CPU Stand

TELESCOPIC CPU STAND     Stores C.P.U. under the table. Saves valuable working space. Soft anti-vibration pads provided. Width adjustment from 145 mm to 225 mm. Height adjustment from 310 mm to 530 mm. No tools needed for adjusting height and width range. Safe load - 20kgs. Material - steel. Finish - powder coated black.

  • SPECIFICATIONS
    Model Code Finish
    Telescopic CPU Stand CPUS (T)1 Black / Anthracite / White
  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Telescopic CPU Stand CPUS(T)1 - - 4 Nos. 9.3
View Complete Details

TELESCOPIC CPU STAND - SWIVEL

TELESCOPIC CPU STAND - SWIVEL & PULLOUT     Stores C.P.U. under the table. Saves valuable working space. 360°  Swiveling  and Pullout for easy access to the rear of the CPU. Direct mounting no assembly. Soft anti-vibration pads provided. Width adjustment from 145mm to 225mm. Height adjustment from 310mm to 530mm. No tools needed for adjusting height and width range. Extension available is 310 mm Safe load - 20kgs. Material - Steel. Min instalation depth: 540mm Finish - Black Powder Coated.

  • SPECIFICATIONS
    Model Code Finish
    Telescopic CPU Swivel & Pullout CPUS (T)2 Black / Anthracite / White
  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Telescopic CPU Swivel & Pullout CPUS (T)2 - - 2 Nos. 7.8
View Complete Details

TELESCOPIC CPU STAND - SLIM

TELESCOPIC CPU STAND - SLIM     Stores C.P.U. Under the table. Saves valuable working space. Soft anti-vibration pads provided. Width adjustment from 45mm to 100mm. Height adjustment from 310mm to 530mm. No tools needed for adjusting height and width range. Safe load – 20 kgs Material – Steel.

  • SPECIFICATIONS
    Model Code Finish
    Telescopic CPU Stand - Slim CPUS-TS Black / Anthracite / White
  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Telescopic CPU Stand Slim CPUS-TS - - 6 Nos. 11.4
View Complete Details

WORK STATION TRAY

This tray fits perfectly on the top edge of a drawer in a work station. Aesthetically designed with both, utility and end use of mind. This tray augments the looks and feel of any work station. Manufactured out of A.B.S. for strength and long life. Smaller tray economy model available. 

  • SPECIFICATIONS
    Model Code Size in mm Finish
    Work Station Tray WST 14-6 355 x 151 Black
    WST 16-6 405 x 151

     

  • PACKING CHART
    Model Code    Inner Packing (Kgs.) Outer Packing(Kgs.)
    Qty Weight  Qty Weight 
    Work Station Tray  WST 14-6 1 No  0.212 60 Nos. 14.066
    WST 16-6 1 No  0.24 50 Nos. 13.352
View Complete Details

WORK STATION TRAY - ROUND

This tray can be fitted below any table. Since this tray is directly mounted underneath the table, no drawers are required. System 32 Compatible. 360° rotation for easy accessibility. Aesthetically designed with both, utility and end user in mind. This tray augments the looks and feel of any work station. Manufactured out of Durable Plastics for strength and long life.   FITTING INSTRUCTIONS Engage the mounting bush to the tray as shown in Fig. 1. Align the tray to the front most edge of the table & fix it with the screws provided on to the tables 

  • SPECIFICATIONS
    Model Code Size in mm Finish
    Work Station Tray (Round) WSTR-9 Ø220 Black/Ivory
  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing(Kgs.)
    Qty Weight  Qty Weight 
    Work Station Tray(Round) WSTR-9 1 No. 0.236 20 Nos. 5.712
    New Arrivals
    • Combination Lock - Wood (Vertical) Four Digit Combination Lock for Keyless 
View Complete Details

VERTEBRAE (OVAL)

Ideal for concealing electrical and data cables separately at a work station in an organized way. Enhances the look of furniture. Manufactured out of plastic and is flexible.

  • SPECIFICATIONS
    Model Code Finish
    Vertebrae (Oval) VO2 White / Grey / Black
     

  • PACKING CHART
    Model Code Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight Qty Weight
    Vertebrae Oval VO2 - - 20 Nos. 12.6

     

View Complete Details

Cable Manager

Simple and elegant in appearance. Ideal for managing cables underneath the table.                                     Protects users from coming direct contact with cables.                                     Available in two sizes: Ø20 & Ø40 in length of 500mm.                                     Easy Stick-on installation and screw mounting provision.

  • SPECIFICATIONS
    Model Code Size Finish
    Cable Manager - Dia 40 CM 4050 500mm x Ø 40 White
    Cable Manager - Dia 20 CM 2050 500mm x Ø 20 White
  • PACKING CHART
    Item Item Code Size Inner Packing (Kgs.) Outer Packing (Kgs.)
    Qty Weight  Qty Weight 
    Cable Manager - Dia 40 CM 4050 500mm Ø40 1 0.07 - -
    Cable Manager - Dia 20 CM 2050  500mm Ø20 1 0.03 - -
View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Rajesh Nair / Hemant
  • 402-3, Saki Vihar Road, Andheri East, Saki Naka, Mumbai, Maharashtra - 400072, India