Pumps, Pumping Machines & Parts #5514480

ZM type motor-driven multiple line grease pump is designed for city bus, trucks and trailers, concrete mixers, garbage collecting trucks. There are 12V and 24V for option, It is suitable 000# grease up to 2# grease.

GM type motor-driven grease pumps are designed and manufactured to meet the needs of the market and customers for various kinds of medium and small machineries. GM motor-driven grease pump's rated output pressure is 35kgf/cm. is from grease lubrication system together with 35-type pressure volume type distributor, progressive distributor or different kinds of resist-type distributors. The system is of moderate pressure, capable of increase the pressure of grease to 35kgf/cm2 and feed lubrication points of grease in precise dose or in proportion. GM series motor-driven grease pumps are suitable for plastic machinery, engineering machinery, and machinery for textile, printing, woodworking , chemical, food, and so on, ensuring lubrication performance of various kinds of machinery products, for longer service life and accuracy. Features:1.Utilizes three-phase 380V motor for powerful operation, easy installation and wiring.2. Adopting special alloy steel gear pump for stable output pressure, low noise and long service life.3. With grease level sensor for self detecting inadequate grease and alarm.4. Point action switch for any-minute machine lubrication.5. If the pump is equipped with pressure switch it will provide pressure signal and realize automatic control by connecting with main unit.6. If the pump is equipped with automatic pressure take-off device, and used with our company's 3-type extra pressure volume type distributor to form a grease lubrication system with moderate pressure, it can achieve full performance of lubrication.

TW type motor-driven lubrication pump

TW type motor-driven lubrication pump is composed of motor and gear pump mainly, its rational construction, economic usefulness, widely scope of application can used in centralized lubrication system of all kinds of mechanical equipment such as machine tool, plastic injection, casting machine, spinning machineries, print machineries, escalator and conveyer machineries.

Appearance and Installation Dimension

OB type oil mist lubrication pump is driven by compressed air, sprays oil fog particles in the size between 0.5 and 15 0.5-15m. It is application for lubrication and cooling of lubrication points. It is equipped with electromagnetic valve. When connected with main unit electric control, it can realize control of lubrication time. Besides oil mist lubrication, it also provides three manual oil outlets, widely used in equipment in machinery industry.

QD series pneumatic lubrication pumps are divided into QDL oil Series and QDG grease Series. This series is specially designed and manufactured to meet the market demand for high, middle and low pressure centralized lubrication systems. It is designed with compressed gas as drive source, to ensure lubrication performance of various kinds of mechanical products, to extend service life and improve precision of machinery. This pump unit is extensively used in construction machines, automotive chassis, rubber machines, forging machines and machine tools, etc. Features1. This pneumatic lubrication pump uses automatic to and fro cylinder drive, realizing automatic reversing, and it is not necessary to connect reversal valve and program controller, etc.2. This pump has high output pressure that can be controlled by adjusting air source pressure. The boost ratio is as high as 1:40.3. This pump can match with float switch or proximity switch to realize low-level alarm.4. Flexible installation modes.5. Based on different configurations, it can be used in oil lubrication system and grease lubrication system. 1. Working principleCompression spring (1) pushes the piston (2) to the left end of the cylinder. The pull rod (3) is connected to the middle of the piston, and the pull rod causes movement of the valve core (4) to open the air inlet (5) and close the exhaust port (6). After the air inlet is opened, outside air source enters the cylinder via the air inlet for air pressure increase. The piston moves to the right and drive the pull rod to move, the air inlet closes and the exhaust port opens, and the compressed air inside the cylinder goes out from the exhaust port, and the pressure inside the cylinder drops, and the compression spring restores the piston to the left end under spring force. The to and fro motion of the piston drives the piston (7) for suction and delivery of grease. The check valve (8) in the front of the piston closes during suction and opens during grease delivery. It features simple structure and steady operation.

DC type electromagnetic lubrication pump is a small discharged oil pump, specially designed and manufactured to meet the customer's requirement for various kinds of medium and small size machinery. It pump is a piston pump that is driven to make the spring work back and forth by electromagnetic force. The pump is compact, and easy maintenance. To equipped with PLC of the machines can be adjusted to achieve the oil delivery to each lube point in cycle. DC type electromagnetic lubrication pump is supplied in AC 220V version and AC110V version. It is option for different applicationsor different machines of users. DC type DC type electromagnetic lubrication pump can be formed with resist type distributor to combine resist type lubrication system. It is via resist type distributor to delivery the oil in proportion to each lube points. It can achieve particularly good lubrication performance if matching with resist-type distributor made by our company. The pump is widely used in machine tools, textiles, plastics, packaging, printing and forging machines and other small machines. Features:A. Ease of installation and simple wiring.B. High-precision parts for accurate and stable discharge.C. Plastic oil reservoir, metal oil reservoiris available for users to choose for different application environments at reasonable prices.

GH type grease lubrication pump is an innovative product, which changes thetraditional oil suction way into self-pressure oil suction way , and uses special disc-type motor whose oil suction efficiency is greatly increased. It features compact structure , elegant design, balanced operation, as well as over-load and over-pressure protection function, automatic pressure taken-off device and valve for ease of removal of cavity in oil during adjustment.Equipped with relevant electrical control system, it can achieve automatic or intermittent constant delivery to lubrication points, very simple and easy to use. Also it can be equipped with low oil level auto alarm system to realize auto alarm function, which further adds to system safety and reliability. If needed, this series can also match with two types of timing system , dial-time microcomputer time controller ( time range: 2-256 minutes of intermittent time/2-256 seconds of running time) and digital display microcomputer time controller ( time range: 1-999 minutes of intermittent time.1-999 seconds of running time ) respectively with which theintermittent time and running time can be directly and conveniently, safely and reliably according to actual requirements.

TM-type automatic intermittent lubrication pump is comprised of a micro-control unit and a worm-gear reduction mechanism. When power supply is connected , this lubrication system will realize automatic intermittent lubricant replenishment. According to different ranges of discharge volume , the products are divided into two adjustable specifications , one is from 1-3ml/cy, the other is 3-6ml/cy. TMS is designed and developed based on TM pump, for match with various kinds of medium and small sized machinery. It features more delicate size , with discharge adjustment of only 1-3ml/cy .Intermittent period is specified as 2.4, 6, 10, 15, 30, 60, or 120 minutes. TM type automatic intermittent lubrication pump can form the resist type lubrication system with resist-type distributors together, discharged the oil in proportion to each lube point of the lubrication system.

TZ type motor-driven lubrication pump is a gear pump with special alloy steel gear pump, with easy installation and wiring, good self-absorbing performance and high volumetric flow rate.TZ-Type series motor-driven lubrication pump comes in two versions with two reservoir sizes (2L and 4L) high-strength plastic reservoir and it is also available for various sizes of reservoirs. The pump is available without dual-timer module, with dual-timer module, and with NK-3 dual timer with digital display and press buttons as options. It can be made the pump whether with the pressure taken-off mechanism according to the customer's requirement. The pump s equipped with level switch. According to the different applications, it can be equipped with the pressure switch. Selecting a lubrication pump with level switch and pressure switch is capable of detecting the pressure and oil level of the system, and implement the automatic integration of intermittence, operation and alarm functions. The pump with pressure taken-off mechanism, it can be with the positive displacement volume type distributor to combine with positive displacement volumetric lubrication system, via volumetric distributor to delivery dosing oil to each lube point. The pump without pressure taken-off mechanism can be with resist type distributor to combine resist type lubrication system, discharged the oil in proportion to each lube point. TZ type motor-driven lubrication pump is widely used in machine tools, plastic machines, spinning and weaving machines, light industry, printing machines, escalator , conveyer and so on.

HL type motor-driven lubrication pump is a gear pump with special alloy steel gear pump, with easy installation and wiring, good self-absorbing performance and high volumetric flow rate. The pump is equipped with level switch. According to the different applications, it can be equipped with the pressure switch. Selecting a lubrication pump with level switch and pressure switch is capable of detecting the pressure and oil level of the system, and implement the automatic integration of intermittence, operation and alarm functions. The pump with pressure taken-off mechanism, it can be with the positive displacement inspecting type distributor to combine with positive displacement inspecting volumetric lubrication system, via volumetric distributor to delivery dosing oil to each lube point. The pump without pressure taken-off mechanism can be with resist type distributor to combine resist type lubrication system, discharged the oil in proportion to each lube point. HL type motor-driven lubrication pump is widely used in machine tools, plastic machines, spinning and weaving machines, light industry, printing machines, escalator , conveyer and so on.

Compatible with ejector systems and the vacuum pump systemsDigital pressure switch for vacuum with energy saving function cutssupply air when the pressure reached the desired vacuum.Air consumption: 90% reducedMore efficient ejectorSuction flow: 50% increasedAir consumption: 30% reduced(Compared to other SMC single stage ejectors)Compact/LightweightVolume 88 cm3 28% reducedWeight 81 g 59% reduced