Manufacturer / Exporter / Supplier / Retailer Of Cable Glands, RAPUSH BUTTON STATION, RACEWAY DUCTS, Junction Box, Copper Tube Fitting, CABLE TERMINAL AND LUGS, Cable Tray System, Gi Perforated Cable Tray, support systems, Earthing Material, Copper Tube Fitting, copper tube, condensing pot, Cable T... Read More
ELCON TUBE FITTINGS come to you completely assembled, finger-tight. They are ready for immediate use. Dis-assembly before use can result in dirt or foreign material getting into the fitting and causing leaks ELCON TUBE FITTING are installed in three easy steps. Insert the tubing into the ELCON TUBE FITTING. Make sure that the tubing rests firmly on the shoulders ofthe fitting and that the nut is snug tight, in this position the tube does not rotate by hand. Before tightening the ELCON nut, scribe the nut atthe 6.00 o'clock position. Now while holding the fitting body steady with a backup wrench, tighten the nut one-and-one quarter turns* Watch the scribe mark, make one complete revolution and continue to the 9.00 o'clock position. *For 1/8", 3/16", 3 & 4 mm size tube fittings, only % turns from finger-tight is necessary the joint is now complete. HIGH PRESSURE APPLICATIONS, HIGH SAFETY FACTOR SYSTEMSDue to the variation of tubing diameters, a common starting point is desirable. Therefore, use a wrench to snug up the nut until the tubing will not turn (by hand) in the fitting. Now tighten the nut one-and-onequarter turns and the fitting is ready to hold pressure well above the working pressure of the tubing. RE-TIGHTENING INSTRUCTIONSDue to the variation of tubing diameters, a common starting point is desirable. Therefore, use a wrench to snug up the nut until the tubing will not turn (by hand) in the fitting. Now tighten the nut one-and-onequarter turns and the fitting is ready to hold pressure well above the working pressure of the tubing. THREAD SPECIFICATIONSELCON connectors have one or more tubing end connections and the others with male or female pipe threads there are a variety of pipe threads for which ELCON Double Ferrule Fittings are available. The most popular thread connections are the American National Pipe thread (NPT) British standard pipe threads (BSP) and metric threads. These threads belong to standards of individual countries as well as iso where they have been codified All ELCON Fittings with pipe threads or stud end threads conforming to the specifications as detailed bellow American National Pipe Thread (NPT) : reference specification ASA B2. 1: 1960ISO parallel pipe threao ( British standard pipe thread ) :Reference specifications BS 2779. ISO 228/1 DIN 259.JISB 0202.IS 2643 ISO taper pipe thread (British standard pipe taper thread ) Unified National pipe threads: Reference specifications ASA B1 1: 1964
Entire ranges of copper tubular terminals are made from ETP grade & EC grade aluminum tubes. Terminals are exclusively designed for study performance even on adverse conditions. Unique type test are conducted as per IS: 8909 & IS: 8337. The range of the terminals & connectors starts from 0.5mm 2 to 1000mm 2 with many variations suiting to many industries. HAZARDOUS AREA GLANDSQuality is extremely important in an electrical system. It is maintained by undertaking stage wise inspection, which is always mandatory. Full fledge in house lab. Inspects raw material & out going finished products as per defined rejection / acceptance methods. Relevant Indian & International standards are maintained by concurrent inspections & close monitoring of quality standards. This will enable the customers to select the terminals as per the specification required.
Share your thoughts with other customers for Elcon Cable Trays
Add Review
