Our Products

Material Handling Machines & Systems 6 Products available
Gearboxes 12 Products available
Coupling 4 Products available
Storage Drums, Tanks & Containers 6 Products available
Conveyors 3 Products available
Others 23 Products available

Storage Drums, Tanks & Containers #4559113

BRIQUETTING GEAR BOX

Elecon has already manufactured a smaller in the series, SCF 355520 for Ms Sponge Iron, Hyderabad and the bigger in the series viz SDN 6701000 for Ms Essar Hazira. These are three stage gear boxes having single input and 2 output, driving the briquetting press rolls. Internals of this box is our of 17CrNiMo6 duly case carburized, hardened and precisely ground enhoused on antifriction bearings mounted in fabricated casing.

This gear box is also supplied alongwith a special pair of gear coupling, one of which having facility for adjusting the angular location of the briquetting roll shaft for aligning the cast cavities of the roll liners. The gear box is lubricated by Forced lubrication

View Complete Details

Ask Latest Price & Details

Reel Gear Box

ELECON has successfully designed, manufactured and supplied gearboxes for Coiler Recoiler Drive for Steel Industries. This gear box will be exported to China through Magadh, Indore. This gearboxes are foot mounted, single stage, parallel shaft, helical gear reducer with solid input and special output shaft (in client scope of supply). This gear box has extra heavy duty Spherical Roller Bearings on output shaft to take care of the dead weight of Coil of 25 Tone as well as Coil Tension.

The gear box housing is made up from extra heavy (Sturdy) Mild Steel Fabricated Material of Fe410 WA as per IS 2062 to take care of the shock load due to coil winding and rewinding.

The internals are case carburised, hardened and ground and specially profile and longitudinal corrected to achieve higher rating and low noise level. The gears are made from high tensile carburising alloy steel of 17CrNiMo6 as per DIN-17210 and case hardened to 60 +- 2 HRC, precisely ground to accuracy class 6. The toothings and bearings are Forced Oil Lubricated.

View Complete Details

Ask Latest Price & Details

GEAR BOX WITH PINION STAND

Gear boxes with Pinion Stand for Wire Rod Mill Drives
The recent trend for such mill stands is to go alternatively for one horizontal and one vertical set which avoids 90 stock rotation at the end of each reduction and accordingly the gear boxes have the drive arrangement and the shaft disposition. ELECON made a mark by developing such type of special gear boxes first time in the country as import substitution and supplied to MS Mukund Ltd and saved sizable amount of foreign exchange.

The set of these gear boxes consist of total 14 No, 7 horizontal and 7 vertical, having higher ratio in the beginning and tapering into lower ratio at the tail end. The size varies from SCF 710 480 at the bigger end to KAF 315 285 at the small end. All the gear internals are out of case carburising steel duly carburised and hardened and precisely ground with profile corrections on all pinions and longitudinal corrections depending on the load, so as to keep the noise level as low as upto 80 db. Forging ratios for the gear internals are specially monitored as well special care is taken in the sealing arrangement. All the bearings as well almost all gear meshing are spray lubricated which are getting adequate supply of lubricating oil from common force lubrication system

View Complete Details

Ask Latest Price & Details

HOT SIZING MILL GEAR BOX

Elecon has developed a special purpose custom built gear box type SBN 2 * 570 705 SSO and supplied to Ms. Jindal Seamless Tubes, Nasik for driving 7 Roll Stand Hot Sizing Mill for Stainless Steel, Pipe finishing.

The gear box is basically designed to transmit power from Two * 340 KW, 750 rpm DC Motor with a reduction ratio of 15.95:1. It consists of twin double reduction stages having two input shafts followed by cluster of 1:1 ratio gear trains resulting into 7 output shafts which are rotating at the same speeds, but having different direction of rotations.

The gears are made from high tensile carburizing alloy steel, 17 CrNiMo6 as per DIN 17210 case hardened to 60 2 HRC and precisely ground to class of accuracy 6 as per DIN 3961 63. The output shafts are made from medium Carbon Steel CK 60 N as per DIN 17200 of adequate size to withstand heavy load transmission for better rigidity without undue deflection.

View Complete Details

Ask Latest Price & Details

Bridle Gear Box

Elecon has developed as special prupose custom built gear box for Bridle Drive and sheet Mill application. This has two input and two output shafts having independent gear trains driving the output shaft in opposite directions with variation in power input. The output shafts are connected to the rolls which stretch the sheet metal before rolling as well as after rolling.

Teeth of pinion and wheels are of double helical type so as to nullify the axial thrust acting on respective shaft. The gears are made from high tensile carburising alloy steel, 17CrNiMo6 as per DIN-17210 case hardened to 60 2HRC and precisely ground to class of accuracy 6 as per DIN 3961 63.

The shafts are supported in Antifriction Spherical Roller Bearings of adepquate size to take care of radial loads permitting large degree of freedom against misalignment.

The gear box is installed with centralised lubrication oil system for providing necessary amount of oil to various gear meshes and bearings thereby resulting into smooth and trouble free operation.

View Complete Details

Ask Latest Price & Details

Special Helical Gear Box

ELECON has successfully designed, manufactured and supplied gearboxes for palm oil industry. This gearboxes are foot mounted, three stage, parallel shaft, helical gear reducer with solid input and out put shaft. The gear box body is out of C.I. and the top gear case has been specially designed to mount electrical motor directly on it. The gear reducer has been fitted with specially designed heavy duty breather plug considering dusty environment.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Zarana Shashikant Karia (Elecon EPC Projects Limited)
Anand Sojitra Road Vallabh, Gujarat - 388120, India
Share us via

View Contact No.

Our Products

Storage Drums, Tanks & Containers 6 Products available
Conveyors 3 Products available
Material Handling Machines & Systems 6 Products available
Gearboxes 12 Products available
Coupling 4 Products available
Others 23 Products available

Storage Drums, Tanks & Containers #4559113

BRIQUETTING GEAR BOX

Elecon has already manufactured a smaller in the series, SCF 355520 for Ms Sponge Iron, Hyderabad and the bigger in the series viz SDN 6701000 for Ms Essar Hazira. These are three stage gear boxes having single input and 2 output, driving the briquetting press rolls. Internals of this box is our of 17CrNiMo6 duly case carburized, hardened and precisely ground enhoused on antifriction bearings mounted in fabricated casing. This gear box is also supplied alongwith a special pair of gear coupling, one of which having facility for adjusting the angular location of the briquetting roll shaft for aligning the cast cavities of the roll liners. The gear box is lubricated by Forced lubrication

View Complete Details

Ask Latest Price & Details

Reel Gear Box

ELECON has successfully designed, manufactured and supplied gearboxes for Coiler Recoiler Drive for Steel Industries. This gear box will be exported to China through Magadh, Indore. This gearboxes are foot mounted, single stage, parallel shaft, helical gear reducer with solid input and special output shaft (in client scope of supply). This gear box has extra heavy duty Spherical Roller Bearings on output shaft to take care of the dead weight of Coil of 25 Tone as well as Coil Tension. The gear box housing is made up from extra heavy (Sturdy) Mild Steel Fabricated Material of Fe410 WA as per IS 2062 to take care of the shock load due to coil winding and rewinding. The internals are case carburised, hardened and ground and specially profile and longitudinal corrected to achieve higher rating and low noise level. The gears are made from high tensile carburising alloy steel of 17CrNiMo6 as per DIN-17210 and case hardened to 60 +- 2 HRC, precisely ground to accuracy class 6. The toothings and bearings are Forced Oil Lubricated.

View Complete Details

Ask Latest Price & Details

GEAR BOX WITH PINION STAND

Gear boxes with Pinion Stand for Wire Rod Mill DrivesThe recent trend for such mill stands is to go alternatively for one horizontal and one vertical set which avoids 90 stock rotation at the end of each reduction and accordingly the gear boxes have the drive arrangement and the shaft disposition. ELECON made a mark by developing such type of special gear boxes first time in the country as import substitution and supplied to MS Mukund Ltd and saved sizable amount of foreign exchange. The set of these gear boxes consist of total 14 No, 7 horizontal and 7 vertical, having higher ratio in the beginning and tapering into lower ratio at the tail end. The size varies from SCF 710 480 at the bigger end to KAF 315 285 at the small end. All the gear internals are out of case carburising steel duly carburised and hardened and precisely ground with profile corrections on all pinions and longitudinal corrections depending on the load, so as to keep the noise level as low as upto 80 db. Forging ratios for the gear internals are specially monitored as well special care is taken in the sealing arrangement. All the bearings as well almost all gear meshing are spray lubricated which are getting adequate supply of lubricating oil from common force lubrication system

View Complete Details

Ask Latest Price & Details

HOT SIZING MILL GEAR BOX

Elecon has developed a special purpose custom built gear box type SBN 2 * 570 705 SSO and supplied to Ms. Jindal Seamless Tubes, Nasik for driving 7 Roll Stand Hot Sizing Mill for Stainless Steel, Pipe finishing. The gear box is basically designed to transmit power from Two * 340 KW, 750 rpm DC Motor with a reduction ratio of 15.95:1. It consists of twin double reduction stages having two input shafts followed by cluster of 1:1 ratio gear trains resulting into 7 output shafts which are rotating at the same speeds, but having different direction of rotations. The gears are made from high tensile carburizing alloy steel, 17 CrNiMo6 as per DIN 17210 case hardened to 60 2 HRC and precisely ground to class of accuracy 6 as per DIN 3961 63. The output shafts are made from medium Carbon Steel CK 60 N as per DIN 17200 of adequate size to withstand heavy load transmission for better rigidity without undue deflection.

View Complete Details

Ask Latest Price & Details

Bridle Gear Box

Elecon has developed as special prupose custom built gear box for Bridle Drive and sheet Mill application. This has two input and two output shafts having independent gear trains driving the output shaft in opposite directions with variation in power input. The output shafts are connected to the rolls which stretch the sheet metal before rolling as well as after rolling. Teeth of pinion and wheels are of double helical type so as to nullify the axial thrust acting on respective shaft. The gears are made from high tensile carburising alloy steel, 17CrNiMo6 as per DIN-17210 case hardened to 60 2HRC and precisely ground to class of accuracy 6 as per DIN 3961 63. The shafts are supported in Antifriction Spherical Roller Bearings of adepquate size to take care of radial loads permitting large degree of freedom against misalignment. The gear box is installed with centralised lubrication oil system for providing necessary amount of oil to various gear meshes and bearings thereby resulting into smooth and trouble free operation.

View Complete Details

Ask Latest Price & Details

Special Helical Gear Box

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Zarana Shashikant Karia (Elecon EPC Projects Limited)
Anand Sojitra Road Vallabh, Gujarat - 388120, India
Share us via

View Contact No.