A pipe conveyor is a rubberized belt which is formed from a conventional troughed shape into a pipe, or tubular shape. Pipe conveyor technology has come far in the last 40 years or so and presently is on par with trough conveyor technology. As such, these conveyors can be compared. The choice of conveyor for any application should be weighed up against the specific criteria and objectives of each customer andor site.

For continuous stacking an reclaiming of crushed bulk materials, economics solutions can only be achieved by the use of combined bucket wheel stacker reclaimer. Elecon bucket wheel stacker reclaimermachine can stack the material to form the stockpile or reclaim the stockpiled material and feed onto themain line conveyor.

All the bearings as well almost all gear meshing are spray lubricated which are getting adequate supply of lubricating oil from common force lubrication system

This gear box will be exported to China through Magadh, Indore. This gearboxes are foot mounted, single stage, parallel shaft, helical gear reducer with solid input and special output shaft (in client scope of supply). This gear box has extra heavy duty Spherical Roller Bearings on output shaft to take care of the dead weight of Coil of 25 Tone as well as Coil Tension.

ETS Series Twin Screw Extruder Gear Box is developed by featuring high torque and high speed output rate. The gearboxes are embedded with excellence high dissipation and oil lubrication system to provide stable output under heavy loading force. The axial thrust is supported by axial roller-type swivel thrust bearing coupled with thrust bearing assembled in tandem way.

The weighing and bagging machines are available in different models like gravitybeltscrew feeder or vibrating feeder tray. These machines are available as a net or gross model, in mild steel or stainless steel construction.

Wagon truck in different models upto 3000 bags per hour are also available. The loading jib is telescopic with 180 rotation and can be lifted by a mechanical or hydraulic jack.

Machines are designed and manufactured adopting the latest technological developments in the field of accurate weighing. The weighing and bagging machines are available in different models like gravitybeltscrew feeder or vibrating feeder tray. These machines are available as a net or gross model, in mild steel or stainless steel construction.

WAGON LOADER

PEL Group Company of ELECON manufactures Different models of truck loaders up to a maximum capacity of handling 3000 bags per hour each of 50 Kgs. can be supplied for loading, stacking and lining up bags onto trucks. Wagon Loaders in different models upto 3000 bags per hour are also available. The loading jib is telescopic with 180 rotation and can be lifted by a mechanical or hydraulic jack.

PEL, Group company of ELECON supplies MAGNETIC SEPERATOR Magneticequipment for separation of tramp iron pieces. Air cooled, oil cooled and permanent magnet available up to 2, 400 mm belt width.

we are supplyeing follwing type of magnatic equipments

A Inline Magnatic separator BSuspended Magnets

DOUBLE ROLL CRUSHER

This gearboxes are foot mounted, three stage, parallel shaft, helical gear reducer with solid input and out put shaft. The gear box body is out of C.I. and the top gear case has been specially designed to mount electrical motor directly on it. The gear reducer has been fitted with specially designed heavy duty breather plug considering dusty environment.

PEL , Group company of ELECON supplies Metal detector for detection of presence of Potentially demaging metel objects from materila over running conveyors

Metal detector provides protection to downstream processing equipment by detecting the presence of potentially damaging metal objects. It is specifically designed for use on conveyor systems carrying materials which contain consolidated or fractured magnetic or nonmagnetic ore, as well as ores ranging in electrical conductivity. The Detector will discriminate between these conveyed materials and tramp metal of any type: ferrous, nonferrous, magnetic or nonmagnetic.

The Detector makes use of the latest in digital electronic technology. The design includes a number of innovative features: self-test circuits that monitor the performance of the detection circuitry, which when they fail, will trigger a Fault Relay. Wide programming capability to custom tailors the Detector to suit specific application requirements

Elecon has been manufacturing Conveyor Idlers for over 6 decades. Developments made and experience gained over the years have inabled us to offer most relaible and well-designed idlers for bulk material handling systems.

Our manufacturing programme covers idlers for capacities between 50 TPH and 24, 000 TPH and wide range of different types of idlers to handle coal, iron ore, fertilizer, lignite, cement and other such bulk materials.

For additional controls and communication facility, required signals are available from the weigh feeder control panel to connect it to a PLC or a supervisory computer either direct or using MODBUS PROFIBUS etc. making it a part of distributed digital control system. Measurement of flow rate and control are all through 32 bit microprocessor based digital techniques ensuring high reliability and accuracy to the level of 0.25% which is not known in the industry presently.

Elecon is an organization of international reputation in the field of Material Handling Equipments and power Transmission Equipments for all core sector industries and also manufacture Motorised Cable Reels for all types of mobiles material handling equipments. With the Synergy of state-of-art design and development, manufacturing Facilities, and strict quality control, we deliver the Cable Reels that provides complete satisfaction to the customer in entire span of its operational life.

Machines are designed and manufactured adopting the latest technological developments in the field of accurate weighing. The weighing and bagging machines are available in different models like gravitybeltscrew feeder or vibrating feeder tray. These machines are available as a net or gross model, in mild steel or stainless steel construction.

The reclaiming capacity is constant and easily adjustable by varying the operational speed of travel drive with help of VVVF Panel. This type of scraper reclaimer is provided with two harrows to dislodge the material from front face of stockpile. Scraper blade fitted on scraper chain collect the dislodged material & feed it to reclaim yard conveyor. It is most suitable for reclaiming the material having large lumps and abrasive nature.

Granular size product.Minimum Fine generation.Crushing efficiency up to 98%.Low Power Consumption.Unique ring design hammers (Toothed Plain).Tramp iron pockets to collect iron particles

The weigh bridge assembly with precise strain gauge load cellbending beam load.The belt speed sensor assembly, andThe electronic cabinet often referred as the totaliser or the integrator.

Pusher Car, also known as miniature locomotive, pushes wagon in or out of tippler.

It consists of Drive Unit and body. After leading wagon is decoupled manually from the rake, remaining wagons are pulled back by the pusher car at predetermined wagon waiting position. Meanwhile, the tippler tips the loaded wagon and come back to the original position with empty wagon. Now, pusher car pushes the rake of remaining wagon to the tippler table, pushing out empty wagon. Thus, the cycle goes on till all wagons are tipped.

Elecon has been manufacturing Conveyor Idlers for over 6 decades. Developments made and experience gained over the years have inabled us to offer most relaible and well-designed idlers for bulk material handling systems.

Soft to medium hard material crushing. Minimum Fine Generation.Lesser Power Consumption.Compact Design.Maintenance Friendly.Easy to replace parts.

ETS Series Twin Screw Extruder Gear Box is developed by featuring high torque and high speed output rate. The gearboxes are embedded with excellence high dissipation and oil lubrication system to provide stable output under heavy loading force. The axial thrust is supported by axial roller-type swivel thrust bearing coupled with thrust bearing assembled in tandem way.

The boggie drive arrangement is used where bridge scrapper for lime stone is required to stack and for that this gear boxes are used at two different speeds.

This gear unit has been specially developed for ms vishakhapattanam steel plant, vizag for their medium merchant steel mills in which different types and sizes of sections like c, i, l are rolled from sponge iron billets. These gear boxes are having single input and two output hollow spline shaft where the guide rollers are mounted on which required size and type of the die is mounted to obtain the final section. These type of the gear units are mounted in a series of 10 numbers.

Steel tubes having diameter 20 to 50 mm sizes are drawn by cold drawing process and process from steel stripes passes through each gear unit output double shafts on which different formation of shape dies are mounted on both output shaft and between dies, steel stripes passes results to form a steel tube of specific diameter. These type of gear units are installed in series. The first gear box is having three input in which the first input is connected to electric motor. Second input is connected to the input of next gear box and the third input is connected to generator so that in case of the power failure the process of drawing the tube will continue in operation. The other gear units in the series is having input shaft double extended. These type of gears are specially developed for one

Tdis gear unit is mainly used in conveyor track drive in automation assembly and painting plant particularly in automobile industries.

Keeping pace with the continuous development and in line with the philosophy of Elecon to offer innovative products, Elecon has developed a range of Elevator gears for passenger Elevator applications. Considering the market need of Traction Machine for 4 to 6 passengers capacity at an affordable price, Elecon has developed this machine to offer the cost effective product to the customers.

Size: 27 to 54 worm pair for coal pulverize mill of coal fired thermal power station.

We have three spiral bevel gear generating machines.

A pipe conveyor is a rubberized belt which is formed from a conventional troughed shape into a pipe, or tubular shape. Pipe conveyor technology has come far in the last 40 years or so and presently is on par with trough conveyor technology. As such, these conveyors can be compared. The choice of conveyor for any application should be weighed up against the specific criteria and objectives of each customer andor site.

For continuous stacking an reclaiming of crushed bulk materials, economics solutions can only be achieved by the use of combined bucket wheel stacker reclaimer. Elecon bucket wheel stacker reclaimermachine can stack the material to form the stockpile or reclaim the stockpiled material and feed onto themain line conveyor.

All the bearings as well almost all gear meshing are spray lubricated which are getting adequate supply of lubricating oil from common force lubrication system

This gear box will be exported to China through Magadh, Indore. This gearboxes are foot mounted, single stage, parallel shaft, helical gear reducer with solid input and special output shaft (in client scope of supply). This gear box has extra heavy duty Spherical Roller Bearings on output shaft to take care of the dead weight of Coil of 25 Tone as well as Coil Tension.

ETS Series Twin Screw Extruder Gear Box is developed by featuring high torque and high speed output rate. The gearboxes are embedded with excellence high dissipation and oil lubrication system to provide stable output under heavy loading force. The axial thrust is supported by axial roller-type swivel thrust bearing coupled with thrust bearing assembled in tandem way.

The weighing and bagging machines are available in different models like gravitybeltscrew feeder or vibrating feeder tray. These machines are available as a net or gross model, in mild steel or stainless steel construction.

Wagon truck in different models upto 3000 bags per hour are also available. The loading jib is telescopic with 180 rotation and can be lifted by a mechanical or hydraulic jack.

Machines are designed and manufactured adopting the latest technological developments in the field of accurate weighing. The weighing and bagging machines are available in different models like gravitybeltscrew feeder or vibrating feeder tray. These machines are available as a net or gross model, in mild steel or stainless steel construction.

WAGON LOADER

PEL Group Company of ELECON manufactures Different models of truck loaders up to a maximum capacity of handling 3000 bags per hour each of 50 Kgs. can be supplied for loading, stacking and lining up bags onto trucks. Wagon Loaders in different models upto 3000 bags per hour are also available. The loading jib is telescopic with 180 rotation and can be lifted by a mechanical or hydraulic jack.

PEL, Group company of ELECON supplies MAGNETIC SEPERATOR Magneticequipment for separation of tramp iron pieces. Air cooled, oil cooled and permanent magnet available up to 2, 400 mm belt width.

we are supplyeing follwing type of magnatic equipments

A Inline Magnatic separator BSuspended Magnets

DOUBLE ROLL CRUSHER

This gearboxes are foot mounted, three stage, parallel shaft, helical gear reducer with solid input and out put shaft. The gear box body is out of C.I. and the top gear case has been specially designed to mount electrical motor directly on it. The gear reducer has been fitted with specially designed heavy duty breather plug considering dusty environment.

PEL , Group company of ELECON supplies Metal detector for detection of presence of Potentially demaging metel objects from materila over running conveyors

Metal detector provides protection to downstream processing equipment by detecting the presence of potentially damaging metal objects. It is specifically designed for use on conveyor systems carrying materials which contain consolidated or fractured magnetic or nonmagnetic ore, as well as ores ranging in electrical conductivity. The Detector will discriminate between these conveyed materials and tramp metal of any type: ferrous, nonferrous, magnetic or nonmagnetic.

The Detector makes use of the latest in digital electronic technology. The design includes a number of innovative features: self-test circuits that monitor the performance of the detection circuitry, which when they fail, will trigger a Fault Relay. Wide programming capability to custom tailors the Detector to suit specific application requirements

Elecon has been manufacturing Conveyor Idlers for over 6 decades. Developments made and experience gained over the years have inabled us to offer most relaible and well-designed idlers for bulk material handling systems.

Our manufacturing programme covers idlers for capacities between 50 TPH and 24, 000 TPH and wide range of different types of idlers to handle coal, iron ore, fertilizer, lignite, cement and other such bulk materials.

For additional controls and communication facility, required signals are available from the weigh feeder control panel to connect it to a PLC or a supervisory computer either direct or using MODBUS PROFIBUS etc. making it a part of distributed digital control system. Measurement of flow rate and control are all through 32 bit microprocessor based digital techniques ensuring high reliability and accuracy to the level of 0.25% which is not known in the industry presently.

Elecon is an organization of international reputation in the field of Material Handling Equipments and power Transmission Equipments for all core sector industries and also manufacture Motorised Cable Reels for all types of mobiles material handling equipments. With the Synergy of state-of-art design and development, manufacturing Facilities, and strict quality control, we deliver the Cable Reels that provides complete satisfaction to the customer in entire span of its operational life.

Machines are designed and manufactured adopting the latest technological developments in the field of accurate weighing. The weighing and bagging machines are available in different models like gravitybeltscrew feeder or vibrating feeder tray. These machines are available as a net or gross model, in mild steel or stainless steel construction.

The reclaiming capacity is constant and easily adjustable by varying the operational speed of travel drive with help of VVVF Panel. This type of scraper reclaimer is provided with two harrows to dislodge the material from front face of stockpile. Scraper blade fitted on scraper chain collect the dislodged material & feed it to reclaim yard conveyor. It is most suitable for reclaiming the material having large lumps and abrasive nature.

Granular size product.Minimum Fine generation.Crushing efficiency up to 98%.Low Power Consumption.Unique ring design hammers (Toothed Plain).Tramp iron pockets to collect iron particles

The weigh bridge assembly with precise strain gauge load cellbending beam load.The belt speed sensor assembly, andThe electronic cabinet often referred as the totaliser or the integrator.

Pusher Car, also known as miniature locomotive, pushes wagon in or out of tippler.

It consists of Drive Unit and body. After leading wagon is decoupled manually from the rake, remaining wagons are pulled back by the pusher car at predetermined wagon waiting position. Meanwhile, the tippler tips the loaded wagon and come back to the original position with empty wagon. Now, pusher car pushes the rake of remaining wagon to the tippler table, pushing out empty wagon. Thus, the cycle goes on till all wagons are tipped.

Elecon has been manufacturing Conveyor Idlers for over 6 decades. Developments made and experience gained over the years have inabled us to offer most relaible and well-designed idlers for bulk material handling systems.

Soft to medium hard material crushing. Minimum Fine Generation.Lesser Power Consumption.Compact Design.Maintenance Friendly.Easy to replace parts.

ETS Series Twin Screw Extruder Gear Box is developed by featuring high torque and high speed output rate. The gearboxes are embedded with excellence high dissipation and oil lubrication system to provide stable output under heavy loading force. The axial thrust is supported by axial roller-type swivel thrust bearing coupled with thrust bearing assembled in tandem way.

The boggie drive arrangement is used where bridge scrapper for lime stone is required to stack and for that this gear boxes are used at two different speeds.

This gear unit has been specially developed for ms vishakhapattanam steel plant, vizag for their medium merchant steel mills in which different types and sizes of sections like c, i, l are rolled from sponge iron billets. These gear boxes are having single input and two output hollow spline shaft where the guide rollers are mounted on which required size and type of the die is mounted to obtain the final section. These type of the gear units are mounted in a series of 10 numbers.

Steel tubes having diameter 20 to 50 mm sizes are drawn by cold drawing process and process from steel stripes passes through each gear unit output double shafts on which different formation of shape dies are mounted on both output shaft and between dies, steel stripes passes results to form a steel tube of specific diameter. These type of gear units are installed in series. The first gear box is having three input in which the first input is connected to electric motor. Second input is connected to the input of next gear box and the third input is connected to generator so that in case of the power failure the process of drawing the tube will continue in operation. The other gear units in the series is having input shaft double extended. These type of gears are specially developed for one

Tdis gear unit is mainly used in conveyor track drive in automation assembly and painting plant particularly in automobile industries.

Keeping pace with the continuous development and in line with the philosophy of Elecon to offer innovative products, Elecon has developed a range of Elevator gears for passenger Elevator applications. Considering the market need of Traction Machine for 4 to 6 passengers capacity at an affordable price, Elecon has developed this machine to offer the cost effective product to the customers.

Size: 27 to 54 worm pair for coal pulverize mill of coal fired thermal power station.

We have three spiral bevel gear generating machines.