Electronica India is one of the leading Drawn Arc Stud Welding Machine Manufacturers in Kolkata (W.B.). Our Drawn Arc Stud Welding Machine features advanced ZVS technology with highest efficiency, thus it is widely praised for its effective performance. Our Drawn Arc Stud Welding Machine is ideal for site applications. Features

• Advance ZVS technology with highest efficiency.
• High power factor 0.95 at full load.
• Advance dynamics controls for batter arc stability.
• Support up to 30 mtrs cable length (T.C applied).
• Duty cycle 20% @ 10 min at 40C.
• Generator compatible
• Wide input voltage fluctuation tolerant
• Ideal for site application.
• Module IGBT based
• Microprocessor based
• Shipped with TWI compatible damper Gun for deck sheet welding upto 25 mm shear stud.
• One set chuck is compliment y with every machine.

Welding Machine Specification
Mains supply voltage , Ph/VAC , V	3/415 20% +15%
Mains supply frequency, Hz	50/60
Open circuit voltage VDC (max), V	78
Energy saver	In-built
Welding current range, A (TIG/MMA)	50 500
Load Capacity at 400C
60% Duty Cycle, A (TIG/MMA) @6Hrs	630
100% Duty Cycle, A (TIG/MMA) @6Hrs	450
Input power 100% Duty Cycle, kVA	25 (TIG/MMA)
Power factor at 100% Duty Cycle	15 (TIG/MMA)
Efficiency at 100% Duty Cycle	87%
Control Panel Features
Digital Display (Voltage & Current)	YES
Cooling	Water Cooled
Protection class	IP23S
Insulation class (main transformer)	H
Dimensions(app.), LxWxH, mm	590x305x565
Weight(app.), Kg	42
IEC 60974-1, IEC 60907-10 Conformance	YES
Pump Specification	MODEL NO:MCUP-50 (Single Phase)
Mains supply Voltage, V	380
Mains supply Frequency, Hz	50/60
Power Consumption, kW	0.37
Insulation Class	F
Flow Rate(Max), Lit/Min	8
Water Height, Mt	30
Power, HP	0.5
Cooling Capacity, W	1500
Dimensions (app.), LxWxH, mm	690x315x250
Weight (app.), Kg	16

ZM200/ZM250 are single phase & ZM260 is 3-phase inverter welder for MMAW and TIG (Lift TIG). These can burn MMA electrodes of any class. Soft Arc Start is available for smooth starting of TIG in Lift TIG. All the machines are suitable for continuous use of 3.15/4.0/6.3 mm MMA Electrodes.

Parameters	ZA-630	ZA-1000	ZA-1250
Mains supply voltage, Ph/Vac (Tolerance)	3-Ph/415V (-15% +15%)	3-Ph/415V (-15% +15%)	3-Ph/415V (-15% +15%)
Open circuit voltage, Vdc (max)	71.5	71.5	71.5
No load power, W	100	100	100
Output current range, A	160-630	160-1000	160-1250
Duty Cycle %	100	100	100
Dimension (LxWxH) mm	690x355x965	690x355x965	690x355x965
Weight, kgs (approx.)	70	98.5	98.5

We are engaged in manufacturing and supplying welding equipment such as multi process inverter welder (cv/cc), multi operator inverter welder, inverter mmaw/tig welder and inverter welding machine.

ZM-4000/5000/7200 are 400/500/720 multi-process inverter welder (CV/CC) based power sources for MIG/MAG, MMAW and TIG. The micro-controller based power sources delivers outstanding welding performance and are suitable for welding in all positions. All key features for MIG/MAG welding e.g. 2/4 track welding, wire inching, gas purging and burn back are available with ZM-series power sources. ZM-4000 is recommended for continuous MIG/MAG welding with 1.2 mm wire and ZM-5000 is recommended for continuous MIG/MAG welding with 1.6 mm MS/SS/Al/FC wire.Both ZM-4000/5000 are suitable for MMA welding with up to 6.3 mm electrodes of any class and TIG welding with Lift TIG. ZM7200 is recommended for heavy duty gurder application.

We are engaged in manufacturing and supplying welding equipment such as multi process inverter welder (cvcc), multi operator inverter welder, inverter mmawtig welder and inverter welding machine.

DA series welding machines are Inverter based welder for STUD welding. These machines are equipped with highly efficient microcontroller. Multiple program for various welding can be stored in its memory.

ZM200E is single phase inverter welder for MMAW and TIG (Lift TIG). These can burn MMA electrodes of any class. Soft Arc Start is available. It can burn up to 6.3mm MMA Electrodes.

ZM200/ZM250 are single phase inverter welder for MMAW and TIG (Lift TIG). These can burn MMA electrodes of any class. Soft Arc Start is available for smooth starting of TIG in Lift TIG. All the machines are suitable for continuous use of 3.15/4.0/6.3 mm MMA Electrodes. These machines are highly energy efficient & extremely low input demand.

Z-400 series machines are 400A IGBT based inverter mmaw/tig welder. MMAW/TIG (Lift TIG) suitable for all weather indoor and outdoor welding applications. Lightest among the Indian manufacturers (415A power source weighs 20Kgs only) and coupled with a robust sheet metal design makes it a preferred choice of the welders. It is equipped with all the essential features for MMAW - anti stick, arc force and hot start to handle MMA electrodes of any class - basic, rutile or cellulosic up to 6.3 mm size. The micro-controller based design ensures consistent performance for any class of electrode even at worse power conditions - input voltgage as low as 360V or as high as 480V. In-built protections are provided against thermal overloading, single phasing, over/under voltage and harmonics. Pf is close to unity and saves electricity up to the extent of 40 to 50% over the conventional rectifiers.

Z-200T/ Z-300T/ Z-630T are inverter welder for DC TIG, Pulse TIG & MMAW. These can burn MMA electrodes of any class & welding in any position. Soft Arc Start is available for smooth starting of TIG in Lift TIG. These machines are lightweight yet sturdy construction.