12 kV to 420 kV, 51020 kA Single Three Phase Distribution Type and Station Type, Porcelain Bushing Surge Lightning Arresters with Mounting Pad, Terminal Connectors, Insulating Bases & Surge Monitor. 0.5 kV to 72.5 kV, 510 kA Single Three Phase Distribution Type and Station Type, Polymer Bushing, Surge Lightning Arresters.

11 kV to 420 kV, 100 to 4000 Amps Horizontal, Vertical, Underhung Mounted Double Break Three Phase Isolators & 33 kV to 420 kV, 100 to 4000 Amps Horizontal, Underhung Mounted, Center Break Isolator

• Place of OriginIndia
• Rated Voltage11/36 kV
• Rated Current200/800 Amps
• PhaseSingle / Three
• Poles Number1/3
• Brand NameELEKTROLITES

1112 kV to 3336 kV 630 Amps to 1600 Amps Load Break Switch (Outdoor Type) Features: 1 - SCADA Ready 2. SF6 Free Air Break Technology 3. Arching Chamber for Full Load Operation 4. Seamless Integration with Existing SCADA Networks

The main function of fault passage indicating system is to identify faults occurring in the downstream section from the point of its installation in the medium voltage system. This is achieved by continuous monitoring of voltage presence and current flow in medium voltage line. Any increase in current along with absence of voltage is signaled by the equipment. Fault condition is indicated by flashing lights in FPI; this information is sent using radio signals to the communication gateway installed nearby for onward transmission to SCADA system at the control centre through a suitable communication channel. Using this system, the utility acquires information regarding the section of the line having fault. This identification helps eliminate the patrolling of entire line for finding the fault, ultimately reducing restoration time.

• TypeVacuum Circuit Breakers
• Brand NameAnchor, Bosch, Haveels, Hitachi, Orpet, Sentai
• MaterialCeramic, Hard PVC, LDPE, Plastic, PP, PVC
• ColorBlack, Creamy, Grey, White
• ConditionNew, Used
• Power SourceElectric
• FeatureBest Quality, Durable, Easy To Fir, High Performance, Stable Performance, Use Friendly
• Warranty1year, 2years
• Puncture Voltage100-200V, 200-300V, 400-500V
•  Connection Type3way

• Place of OriginIndia
• Rated Voltage11/36 kV
• Rated Current200/800 Amps
• PhaseSingle / Three
• Poles Number1/3
• Brand NameELEKTROLITES

We are a government approved in-house R&D Center specializing in design and fabrication of all types of support structures. We design and manufacture substation structures, switch yard structures, solar panel mounting structures, gantries, and various other kinds of custom designed steel structures. Structure is made of components of Mild Steel such as angle,  channels, sheets, square pipes, plates etc. We have a team of experienced design engineers along with modern machinery and equipments to provide best quality at committed delivery times. Our state of-the-art in-house galvanizing plant, approved by power Grid Corporation of India Limited (PGCIL), ensures that we are the quickest in delivery of Sub-Station and Solar Panel support structures.  With firm commitment to quality, we manufacture and supply a comprehensive range of galvanized structures. The offered range of products is manufactured using premium quality low-carbon raw material and components.   Various types of sub-station and solar panel mounting structures manufactured by us:   Sub-station Structures (both Welded and Bolted type) Lattice Type Pipe Type Gantry Structures The number of columns and girder beams, comprised in the Gantries and Equipment support structures, depends on the load-bearing capacity as determined by the equipment mounted on the structures. The Gantry and Equipment support structures can be manufactured depending upon the site and client's requirement. Solar Panel mounting Structures (both Welded and Bolted type) Designing and Fabrication of solar mounting structures Hot dip Galvanizing of solar mounting structures Fabrication of solar trackers

• TypeBus Duct
• MaterialAluminium, HDPE, HVAC, Metal, PVC
• Diameter0-10cm, 10-20cm, 20-30cm, 30-40cm, 40-50cm
• ShapeRectangular, Round, Square
• Length0-50cm, 100-150cm, 150-200cm
• ApplicationBusbars Use
• ColorBrown, Creamy, Grey, Metallic, Shiny Silver, Silver, White
• Surface FinishingPolished, Power Coated
• FeatureAccuracy Durable, Corrosion Resistance, Dimensional, Hardend & Temper, High Quality

• TypeFuse Unit
• MaterialCermaic, China Clay
• ApplicationCommercial, Indistrial, Residential
• ColorCreamy, Grey, White
• ConditionNew
• Frequency60Hz
• Automatic GradeAutomatic, Manual
• Power0-5Kw, 10-15Kw, 15-20Kw, 20-25Kw
• FeatureAuto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Warranty1Year, 2Years
• Voltage110 V, 220 V, 380 V, 480 V

The main function of fault passage indicating system is to identify faults occurring in the downstream section from the point of its installation in the medium voltage system. This is achieved by continuous monitoring of voltage presence and current flow in medium voltage line. Any increase in current along with absence of voltage is signaled by the equipment. Fault condition is indicated by flashing lights in FPI; this information is sent using radio signals to the communication gateway installed nearby for onward transmission to SCADA system at the control centre through a suitable communication channel. Using this system, the utility acquires information regarding the section of the line having fault. This identification helps eliminate the patrolling of entire line for finding the fault, ultimately reducing restoration time.