Electro Hydraulic Thrustor Brake is a heavy duty brake designed to withstand the severe duty conditions imposed by heavy duty machinery in various industries. Electro Hydraulic Thrustor transmits useful thrust through the lever onto the brake shoe thereby releasing the brake. When the power is switched OFF, the brake is smoothly applied because the hydraulic thrust acting against the spring pressure is gradually reduced.

ELEKTROMAG Moulded Plastic Cable Drag Chains are a logical addition to the range of the steel Cable Drag Chains which have proved themselves worldwide for over 25 years.

The magnetic field produced is effective on the entire surface in the range of the conveyor belt. The magnetizable iron pieces contained in the conveyor material are influenced by the magnetic field and drawn on the conveyor belt. The iron pieces follow the run of the conveyor belt until they loosen from the magnetic field and, parted from the conveyor material, are discharged in the belts run direction underneath the magnetic pulley.

Elektromag offers a comprehensive range of products for the efficient, safe handling and control of cables and hoses including spring, motor operated reels and drag chains. Our factory houses full production capability alongside design and development facilities. Our Experienced technical staff can advise on the optimum solution to individual application and tailor our products accordingly, to ensure our clients receive the best solution with Quality assured.

ELEKTROMAG are the pioneers of the Indian Crane Control Gear Industry. These EM Brakes are used when a load must be stopped rapidly to prevent the load from rotating due to the motor and load inertia. EM Brakes have found innumerable applications where stopping of a machine is necessary by automatic control whether it is a question of stopping at a pre-determined timed or at selected points of travel or to prevent over travelling. All types of brakes are normally applied when in OFF position and the brake is released when power is ONconnected. Brakes upto 400mm diameter for Braking Torque as per clients requirements can be supplied.

Standard design WITHOUT POLE PLATE is used for transporting one-piece loads such as sheets or slabs. The pole plate design is used when the magnetic power must be distributed evenly over the full length of the magnet, as is the case, for instance, when transporting a layer of billets. All listed types are available with and without pole plate.

The traditional barrel concrete mixer has been very well established over the past decades. The barrel mobile mixer has fulfilled a role over these decades but not without issues. These issues include:

Magnetic Drum Separators are essential in every processing industry and are widely used for the separation of iron contamination from minerals, chemicals, food, flour, sugar, grains, plastics, sand, cement, fertilizers, rock, borings and many other gravity or conveyor transported products. The Drum Type Separators can be either permanent magnetic or electro magnetic, depending on the nature of the application.

Generally, Overband Magnetic Separators and Suspension Magnets are installed above conveyor belts, vibratory feeders or chutes. They pick up ferrous metal parts from the bulk goods. In most cases, the magnet can also be installed in an existing installation without much expense.

Elektromag offers a comprehensive range of products for the efficient, safe handling and control of cables and hoses including spring, motor operated reels and drag chains. Our factory houses full production capability alongside design and development facilities. Our Experienced technical staff can advise on the optimum solution to individual application and tailor our products accordingly, to ensure our clients receive the best solution with Quality assured.

Electro Hydraulic Thrustor Brake is a heavy duty brake designed to withstand the severe duty conditions imposed by heavy duty machinery in various industries. Electro Hydraulic Thrustor transmits useful thrust through the lever onto the brake shoe thereby releasing the brake. When the power is switched OFF, the brake is smoothly applied because the hydraulic thrust acting against the spring pressure is gradually reduced.

ELEKTROMAG Moulded Plastic Cable Drag Chains are a logical addition to the range of the steel Cable Drag Chains which have proved themselves worldwide for over 25 years.

The magnetic field produced is effective on the entire surface in the range of the conveyor belt. The magnetizable iron pieces contained in the conveyor material are influenced by the magnetic field and drawn on the conveyor belt. The iron pieces follow the run of the conveyor belt until they loosen from the magnetic field and, parted from the conveyor material, are discharged in the belts run direction underneath the magnetic pulley.

Elektromag offers a comprehensive range of products for the efficient, safe handling and control of cables and hoses including spring, motor operated reels and drag chains. Our factory houses full production capability alongside design and development facilities. Our Experienced technical staff can advise on the optimum solution to individual application and tailor our products accordingly, to ensure our clients receive the best solution with Quality assured.

ELEKTROMAG are the pioneers of the Indian Crane Control Gear Industry. These EM Brakes are used when a load must be stopped rapidly to prevent the load from rotating due to the motor and load inertia. EM Brakes have found innumerable applications where stopping of a machine is necessary by automatic control whether it is a question of stopping at a pre-determined timed or at selected points of travel or to prevent over travelling. All types of brakes are normally applied when in OFF position and the brake is released when power is ONconnected. Brakes upto 400mm diameter for Braking Torque as per clients requirements can be supplied.

Standard design WITHOUT POLE PLATE is used for transporting one-piece loads such as sheets or slabs. The pole plate design is used when the magnetic power must be distributed evenly over the full length of the magnet, as is the case, for instance, when transporting a layer of billets. All listed types are available with and without pole plate.

The traditional barrel concrete mixer has been very well established over the past decades. The barrel mobile mixer has fulfilled a role over these decades but not without issues. These issues include:

Magnetic Drum Separators are essential in every processing industry and are widely used for the separation of iron contamination from minerals, chemicals, food, flour, sugar, grains, plastics, sand, cement, fertilizers, rock, borings and many other gravity or conveyor transported products. The Drum Type Separators can be either permanent magnetic or electro magnetic, depending on the nature of the application.

Generally, Overband Magnetic Separators and Suspension Magnets are installed above conveyor belts, vibratory feeders or chutes. They pick up ferrous metal parts from the bulk goods. In most cases, the magnet can also be installed in an existing installation without much expense.

Elektromag offers a comprehensive range of products for the efficient, safe handling and control of cables and hoses including spring, motor operated reels and drag chains. Our factory houses full production capability alongside design and development facilities. Our Experienced technical staff can advise on the optimum solution to individual application and tailor our products accordingly, to ensure our clients receive the best solution with Quality assured.