Ernakulam, Kerala, India
Our Products
TEKSO-RODSCopper Bonded Rod outer conductor layer is low-impedance copper and the center is higher impedance steel; theeffectgiven byTEKSO-RODSis greater than that given by ordinary copper conductors permitting greater span lengths than with copper due to the inseparable union of the two metals.
It deters theft since copper recovery is impractical and thus has very little scrap value. Installations withTEKSO-RODSgenerally recognized as fulfilling the required specifications for a goodground. For this reason it is used with preference by utilities, oil and Gas companies when cost is a concern.
TEKSO-RODSCopper Bonded Rod is making for spatially long lasting maintenance free earthing system and corrosion resistance while providing the lowest resistance to ground. Preventing exposure of the steel core to soil and moisture, theTEKSO-RODSCopper Bonded Rod is suitably treated to prevent oxidation.
TEKSO-RODS(Copper Cladded Steel Rod) are available as per UL standard 8 Ft & 10 Ft length suitable for all soil condition. The electrode is 5/8 or 3/4 dia MS Rod with 250 micron of copper cladding which is tested & certified in our laboratory.
The electrode cab be used standalone or Delta connection or as part of any multiple electrode system. Recommend Tri-Pod connection for better ohmic value (less than 1 Ohm) and 20 years life in all soil condition, even if area is Rock or sandy.
Multi. Protection circuits, Gas-Tube+ TVS technology, Dual protection in Common module and
different module;TVS array technology, low capacitance
Multi-Strike Capability ;RJ45 or RJ11 connector
A class Surge Protective Device for AC Power System.
Sensitive electronic equipment
Telecom centers
Automatic control centers
Intelligent buildings
Industrial enterprises
Medical institutes
FEATURES:DIN rail mounting for easy installation
Plug connectors for quick and easyconnection or rewiring
50kA lightning impulse current Iimp
Thermal disconnect device
Status indicators visually verifyprotection level
TEK1000 is a Solid Copper Air Terminal Lightning protection device of 300mm long, 25 mm dia with connecting feature of 25 x 3 mm down conductor internally assembled with 100 mm Spherical gap Copper ball with 4 nos of flash protection spikes (10 mm dia 100 mm long).
Teksai TEK1000 lightning arresters working on a simple principle of Benjamin franklin which states lightning charges nature of finding easiest path to earth from a nearest sharpest conductor from cloud clubbed with air gap balls which gathers charges from connected earth making lightning attraction more effective.
One entire system of TEK1000 can protect abuilt-uparea of 3500 Sq feet.
TEK1000 is fixed with 300 mm long isolated fiberglass-reinforced plastic (FRP) mast.
The Isolated Down conductor internally connects to the air terminal inside the FRP, 3 Meter GI mast and Base Setting used for top area setting, downconductor 253 GI Strip used with insulation which connects to chemical earthing which will be used for internal.
FEATURES
ThunderGuard series ESE Lightning Arrester, with unique design philosophy, adoptssynthesis techniques of leader discharge, impedance to limit current, air-gapdischarge etc to produce leader channel in advance, improve lightning effect, reduce discharge voltage and change the discharge process of lightningcurrent.
Thus it broaden the lightning wave, flatten the leading wave, decreasethe amplitude and enlarge the scope of protection avoiding side striking andshielding failure then finally actively suppress the damage of Ground Potential
Counterattack. Therefore it is an ideal device to prevent direct lightning.
PRODUCT STRUCTURE:Max discharge current 400KA
Strength of wind resistence 40m/s
Weight 3.9kg
Total height 663 mm
Material Imported SUS304
Installing environment High-rise buildings and top of independent metal bar
INSTALLATION AND MAINTANANCE:Electrowelding the bottom of lightning rod and the increased mast of lightning rod (seamless steel tube and galvanized steel pipe); or connect with flange plate for special rod.
TEKSO-TUBEPipe in Pipe electrodes are designed using high-grade metal alloys and composition of several organic chemicals in adherence with international quality norms. Offered electrodes undergo stringent quality testing with our in-house testing facilities pertaining to company periodical. Available in varied designs, patterns and specifications; our electrodes are handy in protecting the human beings from collapsing in case of leakage current.
Features of Chemical Earthing Electrodes:Data Processing CentersFood Processing & Water Treatment PlantsIndustriesResidencesSubstation and Power Generating StationTelecommunication Towers
TEKSO-TUBEis a high conductive pipe in pipe which is 2-3 inch diameter wide, providing a larger surface area for a better connection to the earth and filled with Electrolytic moisture creating material and easy to refill.An efficient grounding systemis critical to personnel safety and uninterrupted operations. But conventional ground rods are typically insufficient for industrial uses where target resistance can be less than 1 ohm. TheTEKSO-TUBEuses high sensitive electronic equipment to achieve a constant and low-impedance electrical path to the earth, even changing the soil conditions.Large surface area:The wider 2-3 inch diameter provides a larger surface area for a better connection to the earth.
Electrolytic Material:In the presence of moisture, these materials dissolve and seep out of leach holes along the electrode. The electrolytic material continually increases the soils conductivity, further reducing impedance and resistance.
Soil augmentation:TEKSO-TUBEContains a combination of materials which optimize the conductivity of the soil , increases moisture retention and corrosion reducing elements, so that a total enhancement happens which increases the system efficiency.
Easy refills:EveryTEKSO-TUBEcomes with a standard removable cap and access cover for easy maintenance of the ground electrolytic material to be refilled.
Test Joint:The test joint of this pipe is one foot long stranded tape exothermically welded to the body.
Our Products have four times more surface area than a traditional ground rod. This larger surface area helps create the low-impedance connection required to safely channel high-frequency lightning currents to earth.
We can reduce these risks more effectively than other ground rods by providing the most efficient earth interface. In addition, it meets or exceeds relevant design codes and safety standards for protection of personnel, property, and sensitive equipment.
