Other Products / Services #3219658

We are involved in the business of manufacturing and supplying highly efficient Line Filter. It is a type of electronic filter, which is used to attenuate conducted radio frequencies. Line Filter that we offer is specifically designed under the supervision of expert engineers to ensure minimal flaws in the finish product. We make available Line Filter in bulk and at the most competitive prices.

Types of Line Filter:

•  A Line Filter may be incorporated in a connector. For example-
  • An AC Line Filter may be incorporated in a modular IEC power inlet connector or Power Entry Module
  • A telephone line filter may be incorporated in a modular RJ11 connector

• A line filter may be mounted on a PCB
• An AC line filter may be a stand-alone device, chassis mounted inside the equipment
• A facility AC Line Filter is mounted inside a room or cabinet, at the point where the AC power co

 Characteristics of line Filters:

•  A line filter may be used to attenuate EMI in either direction. For example
  • Emissions : It may be used to reduce the unintentional conducted emission from the equipment, to a level sufficiently low to pass regulatory limits (such as FCC part 15). For example, in switching power supplies.
  • Immunity : It may be used to reduce the level of EMI entering the equipment, to a level sufficiently low not to cause any undesired behavior. For example, in equipment used in Radio Transmitter facilities

• The attenuation of Line filters is measured in 2 areas-
  • Common Mode - attenuation to signals that appear identically on each of the wires going through the filter
  • Differential Mode - attenuation to signals that appear on just one of the lines

• For each Mode, the attenuation is characterized over the frequency spectrum, and measured in dB

We are counted amidst the well-known Manufacturers and Suppliers of high-performance Electrical Inductor. It is designed and developed by our experts using high-grade raw materials and advanced machines. The manufacturing process is carried out under the supervision of our quality analysts and thus the finished products remain free from defects. Buyers can easily place bulk orders for Electrical Inductor with us!

About Inductor :An inductor, also called a coil or reactor, is a passive two-terminal electrical component which resists changes in electric current passing through it. It consists of a conductor such as a wire, usually wound into a coil. When a current flows through it, energy is stored temporarily in a magnetic field in the coil. When the current flowing through an inductor changes, the time-varying magnetic field induces a voltage in the conductor, according to Faraday’s law of electromagnetic induction, which opposes the change in current that created it.
An inductor is characterized by its inductance, the ratio of the voltage to the rate of change of current, which has units of henries (H). Inductors have values that typically range from 1 µH (10−6H) to 1 H. Many inductors have a magnetic core made of iron or ferrite inside the coil, which serves to increase the magnetic field and thus the inductance. Along with capacitors and resistors, inductors are one of the three passive linear circuit elements that make up electric circuits.
Inductors are widely used in alternating current (AC) electronic equipment, particularly in radio equipment. They are used to block AC while allowing DC to pass; inductors designed for this purpose are called chokes. They are also used in electronic filters to separate signals of different frequencies, and in combination with capacitors to make tuned circuits, used to tune radio and TV receivers.