• Manufactured using patented PureSat Oximeter technology from Nonin Medical Inc., USA


• Provides fast & reliable SpO2 and Pulse rate measurements on any patient, from neonates to adults


• Bright, easy-to read LED displays indicate SpO2 and Pulse rate measurements


• User selectable High/Low Alarm limits for all parameters


• 8 segment bargraph indicates pulse strength


• Sensor Alarm indicates that the sensor has been disconnected either from patient or from oximeter


• Pulse Beep is sounded for every detected pulse, with the tone varying according to SpO2 value


• 3 Colour Perfusion LED Green (good perfusion), Orange (marginal perfusion) & Red (inadequate perfusion)


• Trends available for 11 patients - upto 24 hours for each patient


• Built-in Rechargeable Battery with a battery back-up of more than 10 hours


• Audible & Visual Low battery indication when 15 minutes remaining


• Ideally suited for Spot Checking, during emergency air or land transport, Operation Theatres, ICU, Outpatient clinics or Emergency rooms


• Wide range of sensors available with most of the sensor having 3 meter cable lengths

Features

• Biphasic Defibrillator


• Energy selection: from 2 to 230 Joule directly from the front panel.


• 2-10 step 1 Joule: 10-230 step 5 Joule.


• Charge time: 5 sec for 230 Joule with fully charged battery.


• 100 shocks of 230 Joule with fully charged batteries.


• Large 5.7 high resolution backlight TFT LCD display.


• Heart rate indicator.


• Integrated thermal printer for ECG traces and events documentation.


• Dimensions: 340 x 260 x 130 mm

• Meet individual needs

• User-adjustable set-point temperature [36C or 39C]

• Ensure safe use

• Easy to read LED display of actual outlet fluid temperature


• Audible and Visible over-temperature alarms Alarm test available by the check button

• Save cost

• No disposable set required Available for two standard tube sixes (4mm & 5mm)

• Extend application

• User-selectable flow rate range [gravity drip]


• 1-15ml/min : Single-channel setting [photo 1]


• 1-20ml/min : Dual-channel setting [photo 2]

• Offer greater convenience

• Mountable horizontally and vertically compact and light-weight with a handle Easy maintenance

• User-selectable flow rate range gravity

• Infusion or transfusion for pre-surgery, post-surgery or short-term surgeries

• 8.4 Color TFT Display with maximum 11 waveforms


• Standard Configuration - 3 Parameters - ECG, SpO2, NIBP


• Upgradeable to Temperature, Respiration, etCO2, IBP, Recorder


• 3/5 Lead ECG with Pacemaker detection, Electrosurgical proof


• Defibrillator protection and synchronization


• Arrhythmia and ST Segment Analysis


• Full 7 Lead ECG Waveforms


• Selectable Layout - Standard Display, Large Font, Trend Screen & OxyCRG View


• Trends - 96 hours, 500 sets NIBP, 50 sets 12-Lead ECG Diagnosis


• Trends - Graphical/Tabular, Arrhythmia Events & Technical Alarms Review


• User selectable alarms for all parameters


• Nurse Call function and bi-directional communication with CMS Central Station


• SD Card Slot enables memory extension for large data storage


• USB & Serial ports enable easy future upgrades


• VGA Output (Slave Monitor) and Analog Output


• Easy mounting on Bed Rail & Optional Wall Mount

• Emco Meditek has been manufacturing Pulse Oximeters since 1989, with an installation base of more than 8000 Pulse Oximeters.


• Now comes the EMCO oxi-mri 3600 MRI Compatible Pulse Oximeter incorporating fiber optic SpO2 sensor, for MRI environment compatibility


• 20 feet Fiber Optic Sensor (non-magnetic) avoids potentially hazardous heating or image artefacts during MR Scans


• Suitable for use in 0.5 to 3 Tesla MRI environment


• Noise/Artefact free MR images


• Bright LED & LCD display which is easily visible from MRI Console Room


• Built-In Rechargeable Battery back-up of 6 hours (approx. 8 procedures)


• Alarm for sensor disconnection either from patient or from oximeter


• Provides fast & reliable SpO2 and Pulse rate measurements


• Suitable for Adult, Paediatric & Neonate


• Audible & Visual Low battery indication

• EMCO Syringe Infusion Pump Infusor 860 is designed for the administration of Anti-Cancer Drugs, Oxytocics, Chemotherapy Medication, Anaesthesia and Life Saving Drugs


• Front loading of Syringes for easy syringe placements


• Bright Blue LCD with white characters for easy viewing


• Built-in Microprocessor surveys all operating and alarm parameters


• Self diagnostic facility checks AC Mains and also prompts the user in case of Wrong entry


• Simply start the pump by selecting the syringe and entering the rate


• Titration - Only two actions to change the flow rate whilst infusing


• Accepts syringes from 10, 20, 30, 50/60, 100 ml of major Indian brands such as dispovan, BD, Romsons, etc


• Wide range of flow rates from 0.1 ml/hr to 400 ml/hr. Infusion Can be programmed in time (hr, min, sec)


• High Volumetric Accuracy over the entire delivery range


• Delivery of fluid at quick rate using Bolus facility. Bolus delivery can be Automatic or Manual


• Bolus rate up to 1700 ml/hr for 100 ml Syringes & 1000 ml for 50/60 ml Syringes


• Anti-Bolus system for patient safety


• 3 level Occlusion Pressure settings (High/Med/Low)


• Display of Vital Parameters such as Rate of Infusion, Cumulative Volume Infused and Time of Infusion on LCD Backlit Display


• Audio and Visual alarms to indicate Occlusion, Near end infusion, Syringe empty, End of Infusion, KVO, Low Battery, Insert Syringe, No Mains etc


• Battery operation possible for Emergencies and Transport. LED indication for battery and mains operation


• Fluid entry proof control panel to avoid damage to interior circuitry and malfunctioning of the pump


• Ideally suitable for OT, ICCU, NICU, PICU, Pain Management, Ambulance, etc


• More than 8000 installations of Syringe Pumps all over India

• A complete self contained system to carry out fetal, vascular and artetial investigations and monitoring, using the principle of Doppler ultrasound.


• Three interchangeable transducers, 2MHz, 4MHz and 8MHz:

• 2MHz transducer monitors fetal heart beats from the 10th week of pregnancy, localizes placenta & detects multiple pregnancies


• 4MHz transducer provide effective diagnosis of deep vascular disorders


• 8MHz transducer allows very precise localization of fine peripheral vessels

• Supplied with : Compact Carry case, Headset, Demo CD, AC Adapter, Recorder lead, Gel, Battery, Operating instructions

• A dedicated unit designed for vascular and artetial investigations with permanently fixed 8MHz transducer


• Economical & Compact


• Supplied with : Carry Pouch, Headset, Demo CD, AC Adapter, Recorder lead, Gel, Battery, Operating instructions

• Output can be presented in three different ways:

• Built-in speaker


• Headset/Headphones attachment


• Any chart recorder (eg. ECG recorder) for waveform analysis

• Calibration switch for reference to help interpretation of waveforms


• Battery-powered audio unit, which can be hand-held, hung round the


• neck or clipped to a belt or pocket


• Auto power shut-off facility for maximum battery life


• Battery low indicator


• Can be connected to mains through A.C.Adaptor

• ECG analysis program, proven by CSE/AHA/MIT database


• 12-lead simultaneous acquisition


• Complete digital filters and self-adapting filtering


• Up to 300 seconds of rhythm analysis for easier in arrhythmia locating


• According to the latest Minnesota code

• One-touch functional shortcut keys


• Onscreen operation guide to check the ECG procedure


• Voice reminder and visual alarming for lead-off, low battery and no paper


• Support general setting according to different situations for physicians and patients


• 3 report formats: simple report, median beat report and manual report

• Massive local storage capacity up to 1500 files


• ECG management PC software (optional)

• Manufactured using patented PureSat Oximeter technology from Nonin Medical Inc., USA
• Provides fast & reliable SpO2 and Pulse rate measurements on any patient, from neonates to adults
• Bright, easy-to read LED displays indicate SpO2 and Pulse rate measurements
• User selectable High/Low Alarm limits for all parameters
• 8 segment bargraph indicates pulse strength
• Sensor Alarm indicates that the sensor has been disconnected either from patient or from oximeter
• Pulse Beep is sounded for every detected pulse, with the tone varying according to SpO2 value
• 3 Colour Perfusion LED Green (good perfusion), Orange (marginal perfusion) & Red (inadequate perfusion)
• Trends available for 11 patients - upto 24 hours for each patient
• Built-in Rechargeable Battery with a battery back-up of more than 10 hours
• Audible & Visual Low battery indication when 15 minutes remaining
• Ideally suited for Spot Checking, during emergency air or land transport, Operation Theatres, ICU, Outpatient clinics or Emergency rooms
• Wide range of sensors available with most of the sensor having 3 meter cable lengths

Features

• Biphasic Defibrillator
• Energy selection: from 2 to 230 Joule directly from the front panel.
• 2-10 step 1 Joule: 10-230 step 5 Joule.
• Charge time: 5 sec for 230 Joule with fully charged battery.
• 100 shocks of 230 Joule with fully charged batteries.
• Large 5.7 high resolution backlight TFT LCD display.
• Heart rate indicator.
• Integrated thermal printer for ECG traces and events documentation.
• Dimensions: 340 x 260 x 130 mm

• Meet individual needs

• User-adjustable set-point temperature [36C or 39C]

• Ensure safe use

• Easy to read LED display of actual outlet fluid temperature
• Audible and Visible over-temperature alarms Alarm test available by the check button

• Save cost

• No disposable set required Available for two standard tube sixes (4mm & 5mm)

• Extend application

• User-selectable flow rate range [gravity drip]
• 1-15ml/min : Single-channel setting [photo 1]
• 1-20ml/min : Dual-channel setting [photo 2]

• Offer greater convenience

• Mountable horizontally and vertically compact and light-weight with a handle Easy maintenance

• User-selectable flow rate range gravity

• Infusion or transfusion for pre-surgery, post-surgery or short-term surgeries

• 8.4 Color TFT Display with maximum 11 waveforms
• Standard Configuration - 3 Parameters - ECG, SpO2, NIBP
• Upgradeable to Temperature, Respiration, etCO2, IBP, Recorder
• 3/5 Lead ECG with Pacemaker detection, Electrosurgical proof
• Defibrillator protection and synchronization
• Arrhythmia and ST Segment Analysis
• Full 7 Lead ECG Waveforms
• Selectable Layout - Standard Display, Large Font, Trend Screen & OxyCRG View
• Trends - 96 hours, 500 sets NIBP, 50 sets 12-Lead ECG Diagnosis
• Trends - Graphical/Tabular, Arrhythmia Events & Technical Alarms Review
• User selectable alarms for all parameters
• Nurse Call function and bi-directional communication with CMS Central Station
• SD Card Slot enables memory extension for large data storage
• USB & Serial ports enable easy future upgrades
• VGA Output (Slave Monitor) and Analog Output
• Easy mounting on Bed Rail & Optional Wall Mount

• Emco Meditek has been manufacturing Pulse Oximeters since 1989, with an installation base of more than 8000 Pulse Oximeters.
• Now comes the EMCO oxi-mri 3600 MRI Compatible Pulse Oximeter incorporating fiber optic SpO2 sensor, for MRI environment compatibility
• 20 feet Fiber Optic Sensor (non-magnetic) avoids potentially hazardous heating or image artefacts during MR Scans
• Suitable for use in 0.5 to 3 Tesla MRI environment
• Noise/Artefact free MR images
• Bright LED & LCD display which is easily visible from MRI Console Room
• Built-In Rechargeable Battery back-up of 6 hours (approx. 8 procedures)
• Alarm for sensor disconnection either from patient or from oximeter
• Provides fast & reliable SpO2 and Pulse rate measurements
• Suitable for Adult, Paediatric & Neonate
• Audible & Visual Low battery indication

• EMCO Syringe Infusion Pump Infusor 860 is designed for the administration of Anti-Cancer Drugs, Oxytocics, Chemotherapy Medication, Anaesthesia and Life Saving Drugs
• Front loading of Syringes for easy syringe placements
• Bright Blue LCD with white characters for easy viewing
• Built-in Microprocessor surveys all operating and alarm parameters
• Self diagnostic facility checks AC Mains and also prompts the user in case of Wrong entry
• Simply start the pump by selecting the syringe and entering the rate
• Titration - Only two actions to change the flow rate whilst infusing
• Accepts syringes from 10, 20, 30, 50/60, 100 ml of major Indian brands such as dispovan, BD, Romsons, etc
• Wide range of flow rates from 0.1 ml/hr to 400 ml/hr. Infusion Can be programmed in time (hr, min, sec)
• High Volumetric Accuracy over the entire delivery range
• Delivery of fluid at quick rate using Bolus facility. Bolus delivery can be Automatic or Manual
• Bolus rate up to 1700 ml/hr for 100 ml Syringes & 1000 ml for 50/60 ml Syringes
• Anti-Bolus system for patient safety
• 3 level Occlusion Pressure settings (High/Med/Low)
• Display of Vital Parameters such as Rate of Infusion, Cumulative Volume Infused and Time of Infusion on LCD Backlit Display
• Audio and Visual alarms to indicate Occlusion, Near end infusion, Syringe empty, End of Infusion, KVO, Low Battery, Insert Syringe, No Mains etc
• Battery operation possible for Emergencies and Transport. LED indication for battery and mains operation
• Fluid entry proof control panel to avoid damage to interior circuitry and malfunctioning of the pump
• Ideally suitable for OT, ICCU, NICU, PICU, Pain Management, Ambulance, etc
• More than 8000 installations of Syringe Pumps all over India

• A complete self contained system to carry out fetal, vascular and artetial investigations and monitoring, using the principle of Doppler ultrasound.
• Three interchangeable transducers, 2MHz, 4MHz and 8MHz:

• 2MHz transducer monitors fetal heart beats from the 10th week of pregnancy, localizes placenta & detects multiple pregnancies
• 4MHz transducer provide effective diagnosis of deep vascular disorders
• 8MHz transducer allows very precise localization of fine peripheral vessels

• Supplied with : Compact Carry case, Headset, Demo CD, AC Adapter, Recorder lead, Gel, Battery, Operating instructions

• A dedicated unit designed for vascular and artetial investigations with permanently fixed 8MHz transducer
• Economical & Compact
• Supplied with : Carry Pouch, Headset, Demo CD, AC Adapter, Recorder lead, Gel, Battery, Operating instructions

• Output can be presented in three different ways:

• Built-in speaker
• Headset/Headphones attachment
• Any chart recorder (eg. ECG recorder) for waveform analysis

• Calibration switch for reference to help interpretation of waveforms
• Battery-powered audio unit, which can be hand-held, hung round the
• neck or clipped to a belt or pocket
• Auto power shut-off facility for maximum battery life
• Battery low indicator
• Can be connected to mains through A.C.Adaptor

• ECG analysis program, proven by CSE/AHA/MIT database
• 12-lead simultaneous acquisition
• Complete digital filters and self-adapting filtering
• Up to 300 seconds of rhythm analysis for easier in arrhythmia locating
• According to the latest Minnesota code

• One-touch functional shortcut keys
• Onscreen operation guide to check the ECG procedure
• Voice reminder and visual alarming for lead-off, low battery and no paper
• Support general setting according to different situations for physicians and patients
• 3 report formats: simple report, median beat report and manual report

• Massive local storage capacity up to 1500 files
• ECG management PC software (optional)