Our Products
It is designed to serve as a host control system for remotely mounted Gas or other Process Transmitters. It is loaded with .software operated exclusive features, Parameters, Maximum Range, unit of measurement & alarm level are all settable in the field to enhance its universal utility & application.
The Model PIC 6002 is a micro controller based Intelligent Indicator controller accepts 4 20 mA input from remotely located transmitter as well as provides 24 volts DC to power the same. It utilizes a point-to-point wiring architecture whereby each Transmitter / Detector Hez id, Alarm/ shutdown device or remote system is individually wired to the control unit. This is the best choice for: >mall systems, where the sensors are located in relative close proximity to the control unit.
Input | 4-20 mAcurrent Loops |
---|---|
Displays | Alphanumeric8X2 |
Indications LED | Poweron, Test, High Alarm |
Output | 24 Volts DC to power transmitter |
Alarm | Adjustable over Full Range |
Power Input | 100-300 VAC47-60Hz Standard/24VDCOptional |
Power Consumption | <5 watts |
Output | Serial Rs-485/ 232 Discrete relaysforfault,lowand high alarm. |
Electrical Classifications | NEMA1 panel mount |
Operating Temperature | -10째Cto55째C |
Humidity Range | 0 to 95% RH, non-condensing |
Dimension | 96X96X160 |
Panel Cutout | 89X89 |
Warranty | One year |
Field Settable | (i) Parameter (All Gases, for special consult Endee) (ii) Maximum Range (iii)Unitof Measurement PPM, LEL, Percent (iv) Alarm Level |
The Model CA 2000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters.
It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault",
Measuring Gas & Range: | Gas Ranges & Application dependent. |
---|---|
Display | Digital Standard LED optional alphanumeric display |
Power Supply | 100-290VAC/47-63HZ |
Ambient Temp | 0-50째 C |
Enclosure | Aluminium casing (power coated) for indoor application |
Mounting | Standard: 19" Rackmounted |
Optional | Flush on Panel/Tabletop |
Warm uptime: | Analysis Detectordependent |
Output(Optional) | 4-20mA |
Alarms | Two Level (selectable range) |
Sample Gas condition | Temp:0-50째C, Pressure: Lessthan 1.5Kg/cm, The gas should be dry& clean. Other than this suitable sample, Conditioning system isrequired. |
Calibration | Manual, On command in microprocessor based system. |
Endee UV Flame Sensor uses very sensitive electronic UV tube. The specially tuned UV tube is designed to detect UV radiations emitted by the naked flame. The UV Flame Sensor is insensitive to normal light and refractory glow in furnace walls.
The out put contacts can be used for alarm, annunciation or trip purposes. The front panel has indications for SUPPLY ON. This will turn ON when the supply is given. RELAY ON indicator confairms presence of UV radiation / flame. Model UV - FR - 21, has a site adjustable time delay of 2 - 8 seconds and is useful for installations with high flicker situation.
UV Flame Amplifiers / Relay has been designed to work with Endee make UV Sensor UV - 01. However, it work satisfactorily with UV Sensors rated 220 V AC.rms of various other makes.
Temperature Range | -40 TO +125 Deg. C |
---|---|
Response Time | Less than 1 Second |
Relay Unit | 220VAC, 50HZ4AMP |
Enclosure | IP40 |
The Model CA 2000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications Changing The Measuring Parameters.
It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific of Gases to Be Measured. Needs of Customer in Selection Optionally Lndee Ca 2000 Is Available With Highly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault",
Measuring Gas & Range: | Gas Ranges & Application dependent. |
---|---|
Display | Digital Standard LED optional alphanumeric display |
Power Supply | 100-290VAC/47-63HZ |
Ambient Temp | 0-50째 C |
Enclosure | Aluminium casing (power coated) for indoor application |
Mounting | Standard: 19" Rackmounted |
Optional | Flush on Panel/Tabletop |
Warm uptime: | Analysis Detectordependent |
Output(Optional) | 4-20mA |
Alarms | Two Level (selectable range) |
Sample Gas condition | Temp:0-50째C, Pressure: Lessthan 1.5Kg/cm, The gas should be dry& clean. Other than this suitable sample, Conditioning system isrequired. |
Calibration | Manual, On command in microprocessor based system. |
Factors that affect the distance used
Maker of flame detector & window contaminationPower charging status of test lamp in use.For usage from far distance, turn the test lamp toward the center of a detector.Cleanness of front window of test lamp(Keep it clean all the time)
Cover range | 3M(max. 5M) |
---|---|
Applied detector | UV/IR flame detector (Contact Rezontech, for details.) |
Continuous operation time | max. 2hours |
Weight | about 3.2KG |
Dimension | 145mm X 250mm |
Enclosure | Aluminium(Anodizing Process) |
Charging method | 1. Connect charging terminal in body to charger 2. Connect AC 220V plug of a charger to a receptacle. 3. In complete discharge, max. 17 hours charging is needed. ※ Charge enough after using.(min. 5 hours) |
Measuring Gas & Range: | Gas Ranges & Application dependent. |
---|---|
Display | Digital Standard LED optional alphanumeric display |
Power Supply | 100-290VAC/47-63HZ |
Ambient Temp | 0-50째 C |
Enclosure | Aluminium casing (power coated) for indoor application |
Mounting | Standard: 19" Rackmounted |
Optional | Flush on Panel/Tabletop |
Warm uptime: | Analysis Detectordependent |
Output(Optional) | 4-20mA |
Alarms | Two Level (selectable range) |
Sample Gas condition | Temp:0-50째C, Pressure: Lessthan 1.5Kg/cm, The gas should be dry& clean. Other than this suitable sample, Conditioning system isrequired. |
Calibration | Manual, On command in microprocessor based system. |
The out put contacts can be used for alarm, annunciation or trip purposes. The front panel has indications for SUPPLY ON. This will turn ON when the supply is given. RELAY ON indicator confairms presence of UV radiation / flame. Model UV - FR - 21, has a site adjustable time delay of 2 - 8 seconds and is useful for installations with high flicker situation.
UV Flame Amplifiers / Relay has been designed to work with Endee make UV Sensor UV - 01. However, it work satisfactorily with UV Sensors rated 220 V AC.rms of various other makes.
Endee UV Flame Sensor uses very sensitive electronic UV tube. The specially tuned UV tube is designed to detect UV radiations emitted by the naked flame. The UV Flame Sensor is insensitive to normal light and refractory glow in furnace walls.
Temperature Range | -40 TO +125 Deg. C |
---|---|
Response Time | Less than 1 Second |
Relay Unit | 220VAC, 50HZ4AMP |
Enclosure | IP40 |
Factors that affect the distance used
Maker of flame detector & window contaminationPower charging status of test lamp in use.For usage from far distance, turn the test lamp toward the center of a detector.Cleanness of front window of test lamp(Keep it clean all the time)
Cover range | 3M(max. 5M) |
---|---|
Applied detector | UV/IR flame detector (Contact Rezontech, for details.) |
Continuous operation time | max. 2hours |
Weight | about 3.2KG |
Dimension | 145mm X 250mm |
Enclosure | Aluminium(Anodizing Process) |
Charging method | 1. Connect charging terminal in body to charger 2. Connect AC 220V plug of a charger to a receptacle. 3. In complete discharge, max. 17 hours charging is needed. ※ Charge enough after using.(min. 5 hours) |
The MOISTURE SENSOR is of solid Polymer structure and is, Fast, Accurate and Reliable Water in Oil and Temperature Transducers designed for Industrial, Transformers and Locomotive applications where a reliable and accurate measurement of water in oil content is highly required. Its fast response time combined with Reliable and Rugged structure make it even suitable for fixed in situ mounting in fluids under Pressure
Dissolved water in oil is a critical data for Oil System Management as water consumes oil additives that can result in severe mechanical damages due to degradation of Lubricant Properties.
In a comprehensive Transformer Maintenance Program, determination of the Moisture content and Temperature of the oils is an essential part. Excessive moisture contents causes accelerated ageing of the Insulation Materials and reduce their Dielectric strength. In extreme cases this can result in Arcing and Short Circuits within the windings. Accurate moisture analysis can also warn about Leaks in the Oil System as water is absorbed from the surrounding air.
AMM-160 is a Portable Moisture & Temperature in oil meter or a sensor that provides an excellent reliable, economical and Time saving solution for measurement of moisture in Oil in the field.
It measures Moisture-in-oil in terms of the Water Activity (aw) and Temperature. The same gets converted into PPM units as in Transformer applications, PPM-unit is traditionally used.
Humidity | 0 to 100%RH, non-condensing |
---|---|
Temperature range | -10 to 50°C |
Display | BACKLIT LCD |
Power supply | 6 VOLTS, DC 4NOS Rechargeable batteries |
COMPUTER INTERFACE | RS232 |
DATA LOGGER | 32 kb |
Storage temperature | -40 to 70°C |
MOISTURE-IN-OIL PROBE: | |
Water activity | 0 - 1 |
Relative Saturation (RS) | 0 to 100% |
Accuracy | 0.025 |
Temperature. | -40 to 100 °C |
PPM of water | 0-1000ppm typical |
Water Sensor | Thin Film Polymer |
Temperature Sensor | RTD 100 |
Sensor protection grid | Aluminium Alloy |
Pressure range of sensor | 1 - 5 bar |
Probe material | Stainless steel |
Probe cable length | 2 meters Standard |
Probe Length Extension | Upto 10 Meters Opts |
ENDEE Model HTM 06 is a unique minituarised portable RH & Temp. meter accurate enough for use in the laboratory as a reference reading. Advanced digital technology Provides all inclusive accuracy specification & reliability that require no field calibration Its well proven capacitive CMOS IC sensor technology offer exceptional resistance to comman contaminants like organic solvents.
Simple to operate, this self contained relative Humidity meter is convenient, easy to use & dependable. It is accurate enough for use as a reference reading in the laboratory.
Overall Ranges | 0 - 100 % RH |
---|---|
Sampling Method | Diffusion (D) orSuction (S) |
Temp. | -20 to +125 deg.C |
Minimum Resolution | 0.1 % & 0.1 Deg.C |
Indication | Four digit LCD Display |
Sensor | Digital Capacitive Sensor & platinum thermo-resistance |
Sensor Protection | Sintered Filter |
Calibration | No calibration ever needed |
Accuracy | +/- 2% with Saturated Salt Calibration & +/-0.2 Deg.C |
Operating Temp. | 20 to 125 deg. C |
Storage Temp. | -20 to + 60 deg. C |
Measuring Rate | 2.5 Per second |
Repeatabelity | +/- 0.1% RH & deg.C |
Hystersis | +/- 1 % RH |
Over range alarm | Automatic |
Power | One 9V battery |
Housing | High Impact Plastic Housing |
Dimensions | 150 X 80 X 30 mm |
Slandered Accessories | Leather Case With Belt Loop & Battery |
Optional Accessories | RS 232 COMMUNICATION INTERFACE DATA LOGGER WITH DATE & TIME |
This light, Hand-held combustible gas leak detector is the perfect tool locating leaks of combustible »gases such as Compressed Natural Gas (CNG), Liqufied Petroleum Gas (LPG) Liqufied 1 Natural Gas (LNG), Methane (Ch4), Hydrogen (H2).
No Scope for user error These Compact, self contained and intrinsically safe designed instrument housed in a weather proof high impact plastic case are powered with a replaceable 4X1.2V Dc battery. On switching 'ON', the instrument goes thorough its complete self integrity check, and displays factory set Warn and Alarm values before indicating 'Ready' for monitoring While in Operation, the instrument monitors the work place continuously giving the latest update concentration of designated Gas through diffusion sampling.
Suction sampling is possible with an optional manual or battery operated pump and adaptor. The poison resistant Pellister or long life, integrally mounted electrochemical Sensors with inbuilt cross interference filters are gas specific. Optionally the sensors can be mounted on an extension cable for monitoring inaccessible locations before entry. The instruments emits an audible beep every 15 sees that provides confidence to the user that he is well protected. Audio, Visual also Warn and Alarms protect him from hazardous situations.
Stack Gaurd Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment.
It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities.
It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms
Enclosure | Aluminum Casting , Weatherproof to IP66 |
---|---|
Ambient Temperature | -20 Deg.C to +70 Deg.C |
Flue Gas Temperature | 0-200 Deg. C.,700 Deg.c Optional |
Operating Range | 0.1 to 1000mg/m3 |
Duct Diameter | 250mm to 2m |
Stack connection | Quick Disconnect Fitting clamp |
Analogue Output | 4-20mA isolated( Liner) |
Alarm Output | 2 SPDT Relay Output |
Alarm Level | Adjustable |
Damping | adjustable |
Power Requirement | 115 V/220 V Ac, 24 V DC |
Probe Material | 316 stainless steel |
Stack Gaurd Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment.
It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities.
It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms
Enclosure | Aluminum Casting , Weatherproof to IP66 |
---|---|
Ambient Temperature | -20 Deg.C to +70 Deg.C |
Flue Gas Temperature | 0-200 Deg. C.,700 Deg.c Optional |
Operating Range | 0.1 to 1000mg/m3 |
Duct Diameter | 250mm to 2m |
Stack connection | Quick Disconnect Fitting clamp |
Analogue Output | 4-20mA isolated( Liner) |
Alarm Output | 2 SPDT Relay Output |
Alarm Level | Adjustable |
Damping | adjustable |
Power Requirement | 115 V/220 V Ac, 24 V DC |
Probe Material | 316 stainless steel |
Stack Gaurd Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment.
It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities.
It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms
Enclosure | Aluminum Casting , Weatherproof to IP66 |
---|---|
Ambient Temperature | -20 Deg.C to +70 Deg.C |
Flue Gas Temperature | 0-200 Deg. C.,700 Deg.c Optional |
Operating Range | 0.1 to 1000mg/m3 |
Duct Diameter | 250mm to 2m |
Stack connection | Quick Disconnect Fitting clamp |
Analogue Output | 4-20mA isolated( Liner) |
Alarm Output | 2 SPDT Relay Output |
Alarm Level | Adjustable |
Damping | adjustable |
Power Requirement | 115 V/220 V Ac, 24 V DC |
Probe Material | 316 stainless steel |
Calibration-Cylinders Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment.
It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities.
It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms
Water Capacity | 0.5Ltr |
---|---|
Fill Pressure/Burst Pressure | 21 bar/55 bar |
Quantity of Gas available for use | 10Ltrand20Ltr |
Container wall material | Aluminium |
Weight when full-* | Less than 300 gms. |
Calibration-Ampoules Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment.
It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities.
It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms
Water Capacity | 0.5Ltr |
---|---|
Fill Pressure/Burst Pressure | 21 bar/55 bar |
Quantity of Gas available for use | 10Ltrand20Ltr |
Container wall material | Aluminium |
Weight when full-* | Less than 300 gms. |
Calibration-Cylinders Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment.
It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities.
It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms
Water Capacity | 0.5Ltr |
---|---|
Fill Pressure/Burst Pressure | 21 bar/55 bar |
Quantity of Gas available for use | 10Ltrand20Ltr |
Container wall material | Aluminium |
Weight when full-* | Less than 300 gms. |
Calibration-Ampoules Finds applications in wide variety of industries where Detection and control of dust level is critical for the safety, Maintenance , Equipment operation, Plant Efficiency and or the environment.
It provides Reliable and Economical Detection of leak and filter Failures in Powder and Bulk Solids industries Stack guard has LED visual Indication and relay output to maximize its user-friendliness and automation capabilities.
It incorporates a specially designed adjustable damping system that increases its response time and prevents False alarms
Water Capacity | 0.5Ltr |
---|---|
Fill Pressure/Burst Pressure | 21 bar/55 bar |
Quantity of Gas available for use | 10Ltrand20Ltr |
Container wall material | Aluminium |
Weight when full-* | Less than 300 gms. |
hnls-2002 is self contained and battery operated. The sensor functions by transmission of radio wave messages to the interface relayer, wireless monitor or gateway bridges or any other compatible receiving controller. The device is field adjustable for interface with other systems. Features such as the relay alarm tests and battery voltage indication make this device a truly remarkable gas detection system.
calibration-cylinders finds applications in wide variety of industries where detection and control of dust level is critical for the safety, maintenance , equipment operation, plant efficiency and or the environment. It provides reliable and economical detection of leak and filter failures in powder and bulk solids industries stack guard has led visual indication and relay output to maximize its user-friendliness and automation capabilities. It incorporates a specially designed adjustable damping system that increases its response time and prevents false alarms
endee model htm 06 is a unique minituarised portable rh & temp. Meter accurate enough for use in the laboratory as a reference reading. Advanced digital technology provides all inclusive accuracy specification & reliability that require no field calibration its well proven capacitive cmos ic sensor technology offer exceptional resistance to comman contaminants like organic solvents.